Used Debag Dila 5/10 Bakery Oven for sale (77,430)

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Iiodpsy Ax Tuefx Anzeg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm Iisdpfx Ajzruf Nenzjg - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Model: VAC-100a + VAC-100m × 4 Towers Year of Manufacture: 2010 Number of Towers: 5 Towers Number of Stations: 50 Bins * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Iodpfozyfvuex Anzjig Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: STYLE-5-488, turning diameter over cross slide: 300 mm, turning length: 2,000 mm, turning diameter: 510 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 11,000 W, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rotational speed (min.): 15 rpm, rotational speed (max.): 2,500 rpm, feed length X-axis: 2 mm, feed length Y-axis: 2 mm, quill travel distance: 160 mm, quill diameter: 75 mm, turning diameter over bed slide: 510 mm, turning diameter over top slide: 300 mm, type of input current: three-phase, overall weight: 3,250 kg, swing diameter over bed slide: 300 mm, Equipment: rotational speed infinitely variable, For sale: STYLE 510 x 2000 CNC Teach-In lathe from 2006. This robust CNC lathe combines a turning diameter of 510 mm with a distance between centers of 2,000 mm. This makes the machine particularly suitable for turning longer shafts, sleeves, flanges, structural components, repair work, and custom parts in small or medium-sized series. The machine is equipped with a closed machining enclosure, three-jaw chuck, Pragati tool turret, tailstock, and STYLE Teach-In control. The combination of CNC-controlled operation and direct manual control makes the machine accessible to both conventionally experienced lathe operators and CNC operators. Ijdpszhl E Ejfx Anzoig The lathe is in working order, fully functional, and still set up in our production facility. It has not been disassembled and can therefore be inspected and tested while powered on. Selling because it is no longer needed in our production. Tool holders, drill chucks, individual cutting tools, measuring tools, clamping devices, and other accessories visible in the photos are only included if explicitly agreed upon.

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Iisdpfxjy Ifmrj Anzog Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) Iodpfxeyzylvs Anzoig 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Iisdpetyyn Hofx Anzsg

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) Iisdpfxozu T Smo Anzjg with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Ø23 x 33 mm, 81 pieces Sizes: Ø 4/5/6/8/10/12 mm, see photos / parts list Iijdeyknlhepfx Anzsg -Price/Fee: complete -Transport dimensions: 555/205/H190 mm -Weight: 15.2 kg

Condition: new, Year of construction: 2017, Exhibition machine Ijdpfjkwg Szsx Anzoig Year of manufacture: 2017 (has not yet been used in production) The Compact Star is a pneumatic gluing press with 5 gluing levels. The rotary motion is provided by a pneumatic drive with safety interlocking. Each level has 4 adjustable vertical clamps with an adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 adjustable horizontal pressure bars with counter bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Length: 2700 mm Width: 3117 mm Height: 3096 mm Availability: short notice Location: Röllbach

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Isdpjzl S Rpefx Anzoig Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, overall weight: 11,600 kg, table length: 500 mm, table width: 500 mm, controller model: Fusion 640 M, rotational speed (max.): 15,000 rpm, rotational speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 35 rpm, table load: 500 kg, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Iiodpfoy Nz Iuox Anzjg Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons Isdpfoyzr Nmjx Anzeig • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: excellent (used), Year of construction: 2010, operating hours: 70,257 h, functionality: fully functional, overall weight: 645 kg, input voltage: 415 V, We have for sale a 2010 FANUC M-710 iC 50s robot with a 30iA controller in very good condition. please see the photos for run times. just been greased and tested Ijdpozxrqcofx Anzoig

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,597 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Isdpfx Aozvb E Denzeig - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Good condition Iijdeybbczjpfx Anzog Price ex location Transport available at extra cost!

Condition: excellent (used), Year of construction: 2010, Assembly line for cabinet bodies, consisting of: The Ligmatech press can be sold separately and was manufactured in 2010; the rest of the system was manufactured in 1996. Pos. 1: Assembly table with conveyor belt 2500*800mm and small parts shelf Pos. 2: Roller conveyor approx. 6000*800 Pos. 3: Glue application station for cabinet body sides with 1 glue gun Pos. 4: Roller conveyor approx. 4000x800mm Pos. 5: Cabinet body lowering station approx. 3000*800; adjustable from working height of 850mm to 300mm Pos. 6: Ligmatech cabinet body press MPH 510/25/09/S Profiline, manufactured in 2010 with automatic infeed and outfeed of cabinet bodies (belt conveyor), safety light curtain at the front Machine data: for cabinet bodies with Length: 250-2500 mm Width: 250-1000 mm Height: 150 -1400 mm Pressing force: 14 KN Positioning speed: 25 mm/s Working height: 300 mm Space requirement: 4000 x 750 x 2300 mm Weight: 2200 kg Iiodpfszi N Rujx Anzog Pos. 7: Cabinet body uprighting station approx. 3000*800mm Pos. 8: Belt conveyor 4000*800 Pos. 9: Cabinet body discharge station 1200*800mm Pos. 10: Cabinet body assembly station, height-adjustable, with belt conveyor 4000*800

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart Ijdpfx Anexbtvfjzsig - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: ready for operation (used), Year of construction: 2000, operating hours: 27,218 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, overall weight: 2,300 kg, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, positioning accuracy: 0.003 mm, swivel angle C-axis (max.): 360 °, number of axes: 3, This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details. • Machine/Mechanic MT500-1000 • Travel X-axis: 210 mm • Travel Z-axis (Multifix holder + manual chuck): 930 mm • Travel Z-axis (Multifix holder + hydr. chuck): 930 mm • Travel Z-axis (Turret + manual chuck): 930 mm • Travel Z-axis (Turret + hydr. chuck): 930 mm • Travel C-axis: 360 degrees • Spindle clearance 45 mm with hydraulic chuck: 3600 rpm • Spindle clearance 57 mm with manual chuck: 3600 rpm • Tool system Haase quick-change holder: 1 tool unit • Tool system Turret VDI 30: 12 tool units • Ball screw pitch in X: 5 mm • Ball screw pitch in Z: 10 mm • Rapid traverse X: 15000 mm/min • Rapid traverse Z: 20000 mm/min • Feed rate X + Z: 0-4000 mm/min • Feed force X-axis: 1382 daN • Feed force Z-axis: 609 daN • Tensile force hollow clamping cylinder: 145 daN/bar Iiodoyxrndspfx Anzsg • Manual chuck Ø 200mm: 3 jaws • Hydraulic chuck Ø 210mm: 3 jaws • Coolant tank volume: 75 l • Coolant pump flow rate: 30 l/min • Coolant pump pressure: 1.4 bar • Max. positioning scatter: 3 µm • Max. backlash: 2 µm • Positioning uncertainty: 2 µm • Max. circularity error on workpiece:

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min Iiodpfx Aozzrmpenzjg - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min Iisdpfxezrpt Uo Anzsg distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Year of construction: 2011, condition: used, functionality: not functional, machine/vehicle number: 602166, Two Eclipse pyrolysis ovens with afterburners, controlled from a single central cabinet. Burner type: TJ 1x100 and 2x 075. Iisdpfx Anszy Hv Njzeg

Condition: like new (used), Year of construction: 1988, 🛠️ 4-Axis CNC Portal Milling Machine WALDRICH COBURG Type 17 – 10 FP A powerful 4-axis CNC portal milling machine from WALDRICH COBURG is offered for sale, ideally suited for machining large and heavy workpieces. The machine impresses with its robust construction, high performance, and extensive equipment. It also offers excellent potential for modernization / CNC retrofit tailored to customer requirements. ⚠️ Important Note The machine is offered without electrical equipment and without CNC control and is therefore perfectly suited as a retrofit project. ⚙️ Highlights ✅ 4-axis CNC portal milling machine with adjustable cross rail ✅ Powerful main drive: 75 kW ✅ Speed range up to 2,000 rpm with high torque Iisdpfxjdu Hg Hj Anzsg ✅ Automatic pallet changer (3 pallets) ✅ Hydrostatic guideways in X & Y axes ✅ Through-spindle coolant system ✅ Ideal for heavy-duty machining & large components 📊 Technical Data 🔹 Distance between columns: 3,100 mm 🔹 Pallet clamping surface: 2,750 x 4,000 mm (extendable) 🔹 Number of pallets: 3 (automatic) 🔹 Max. workpiece weight per pallet: 40 t 🔹 X-axis travel: 5,000 mm 🔹 Y-axis travel: 5,440 mm 🔹 Z-axis travel: 1,000 mm 🔹 W-axis travel (cross rail): 2,500 mm 🔹 Spindle power: 75 kW 🧰 Equipment ✔️ Automatic pallet changer (3 stations) ✔️ Angle heads (RAA) incl. ISO 60 & ISO 50 ✔️ Special angle head ✔️ Spindle extension (650 mm) ✔️ Automatic head changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, photos, or a customized offer!

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. Iijdpsu T Nhmefx Anzog - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine - Solid edge magazine - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Year of construction: 2015, condition: excellent (used), Rexroth valve Type: 5-4WE 10 EB33 Year of manufacture: approx. 2015 Ijdpfxeymr Tno Anzoig