Used Dantherm Fmc 200-4A for sale (16,547)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface Nedpfx Aey Hkfdjfaola - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Nodey Hkd Hepfx Afaola Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Njdpfx Asw S Dmdsfaela Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Nedpfx Aey Dp E Rjfajla Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Nljdpfxey Dqiqs Afaea Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Control system: CC 200 – touchscreen Additional equipment: Production line with Engel Viper 12 Machine is in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Air valve x 4 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Njdpfxoy Dp Iro Afajla Kistler sensor – mold pressure regulation Parallel movements Engel Viper 12 Robot Year of manufacture: 2012 5-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; B-axis pneumatic and C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra charge Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm Nedpfx Asv Sbmqefaola tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm Nodpfx Afswp Ebleajla sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Nodpfx Afsyvgf Djasla Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Nedpfx Asycckcjfajla Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Nedpfx Asqynq Refaola Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with a comprehensive range of drilling and milling tools to meet any requirements in the processing of wood and similar materials. Highlights: • Powerful, featuring drilling spindles with 8,000 RPM and advanced technology – the most robust spindle available on the market, offering over 1,000 hours of maintenance-free operation • Better and more extensively equipped, with a multifunction table that allows for various configuration options, ensuring optimal setup according to your needs • Easier and more intuitive programming thanks to the integrated Cad-Cam module 'MAESTRO CNC' • User-friendly operation: the work table is accessible at all times, and both control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required Construction: The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and very rigid; its particularly wide support surface is specifically designed to ensure the machine’s stability, providing sustained precision regardless of working conditions, without the need for floor anchoring. The base provides a large, solid foundation for the moveable gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of withstanding the highest demands, resulting in superior performance quality and greater accuracy. The movable portal is formed from a solid single piece, anchored to both sides of the base and running on high-quality prismatic guides with recirculating ball carriages. Dual drive motors on the X-axis ensure top performance even under heavy-duty conditions. Movement along the lower movable unit (X-axis) and along the gantry (Y-axis) is achieved via helical rack and pinion transmission. This enables higher tooth-by-tooth thrust, greater acceleration, and increased velocity along the X and Y axes. The specially designed helical gearing ensures lower wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic load as well as allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing top-quality finishing since potential vibrations are fully eliminated. Movement along the X-Y-Z axes is accomplished with brushless motors powered by digital inverters, offering: - Reduced processing times due to improved acceleration - Enhanced positioning accuracy with high-resolution encoders Nledpfxjywvldo Afasa - No need for setup referencing upon startup thanks to absolute encoders - Practically no general maintenance required due to the brushless system, as there are no brushes Axis movement and general machine operating elements are managed by an industrial NS module with digital data transmission.

Condition: excellent (used), CAMAM MO-4A double-sided oscillating drilling machine Number of spindles per side 3 Tool mounting chuck basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material presses per side Nledpfx Afotp Tnzoaoa

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Nljdpfxjy E Ilxj Afaea Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: excellent (used), Weinig 140/4A Four-Side Planer Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Bottom 3 kW Right 2.2 kW Top 3 kW Bottom 3 kW Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Nodow Tiyxjpfx Afasla Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack Nlodpfxowtmi Es Afaea

Condition: new, neu ca. 4 Monate ab Auftragse Nljdpfx Afsynnfioasa Italien 55200 € 1043.28 € 200 to 500 mm 1000x600 mm 640 mm 21 mm/s 2 mm/s 5.5 kW 1800 mm 1300 mm 2500 mm 6400 kg 2 speeds adjustable max. pressure manomete

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes Nsdpfxey Ewv Ts Afaela - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,300 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Lifting Dough Mixer Nljdpfouyrzrox Afasa Diosna mobile mixer Model: D 200 a Dough machine with flour dust cover 2 bowl trolleys Robust engineering 2 speeds Connection: 400V, 32A-CEE plug Refurbished used machine Options: Leasing & rental service Floor anchoring Delivery service Maintenance contract E-Box Service package Commissioning & instruction More lifting dough mixers in stock!

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Nlsdpjy Etktsfx Afaea

Condition: used, axle configuration: 3 axles, first registration: 02/2015, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - EBS = Remarks = Number of axles: 3, Kerb weight: 8,610 kg, Gross weight: 41,000 kg, Kingpin size: 2 inch, Suspension type: air suspension, ABS, EBS, Body build year: 2015, Sidewall material: insulated, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: SLXe 200, Refrigeration unit: diesel, Unit hours / diesel: 11,774, Wall thickness: 45 mm, Cooling type: Cooling and freezing, Axle type: BPW = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 8 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 6 mm; Tyre tread right: 5 mm Weights Unladen weight: 8,610 kg Payload: 32,390 kg Gross vehicle weight: 41,000 kg Functional Refrigeration unit: Diesel (11,774 operating hours) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition Overall condition: average Nlsdpew Srxnefx Afasa Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range covers all European makes, model years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Professional service • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of “recognizable quality” • And much more… Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry through our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power. Njdpfsyagidex Afajla

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,220 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 700 kg, total length: 670 mm, drive type: Elektro, construction width: 730 mm, Low lift pallet truck Load center: 600 mm Mast type: None Technical condition: very good Front tires type: Polyurethane Front tires condition: 100% Rear tires type: Polyurethane Rear tires condition: 100% Battery voltage: 24V Battery capacity: 400Ah Battery manufacturer: Kapatest 100% Nljdpfx Afeykvxisaoa Battery year: 2021 Description: Factory-refurbished used equipment from Toyota, including new inspection and new approval according to FEM (formerly UVV). Pulse control, CE certificate,

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2570x1100x2490 mm Weight 400 kg Total power requirement 4 kw Nlsdpoy Ehy Ajfx Afaoa

Condition: used, Year of construction: 2017, operating hours: 19,500 h, machine/vehicle number: LC621, Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking hours: 19,500 (line)Included UHT process equipment:Tetra Pak Homogenizer 400Cooling tank 2,000 LTetra Pak Aseptic Tank 30,720 L with Tetra AlsafeComplete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers)Tetra Pak CIP satelliteAdvanced Automation & Control SystemsThe line is coordinated via the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling through secondary packaging. Integrated automation supports stable product flow using the Tetra HELIX accumulator, while the Domino printer provides in-line date coding. System-wide interlocks and operator control points contribute to efficient, repeatable changeovers and robust process control suitable for aseptic beverage packaging.Production Line Integration CapabilitiesEngineered for cohesive end-to-end operation, the line links the Tetra Pak A3/Speed V040 filler with straw application, conveyors, accumulation, and both wrap around and case packing. The configuration facilitates smooth transitions between unit operations for stable throughput. It is purpose-built for 200 ml Prisma cartons and integrates easily into existing industrial packaging layouts for beverage production, whether as a standalone carton line or connected to upstream processing utilities.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Speed V040 carton filling line shows 19,500 operating hours. Presented as a complete used bottling line package with downstream packing and UHT processing equipment, it is suitable for facilities seeking proven, production-ready carton packaging machinery.Operational Performance & VersatilityDesigned for aseptic carton packaging, the system supports UHT-treated beverages, leveraging the VTIS UHT unit, homogenization, aseptic storage, and CIP for hygienic integrity. The straw applicator complements the 200 ml Prisma format for on-the-go consumption. Downstream GAMPACK wrap around and case packing provides flexible secondary packaging options, and the Domino date printer ensures... Njdsy Egm Ispfx Afasla