Used Danfoss Vlt 5004, 175Z0052 for sale (331)

Year of construction: 2001, condition: good (used), Electric motor Manufacturer: Danfoss Year of manufacture: 2001 Type: WF-DA90LT-H FCM 315 Type 12 Motor number: J369521 Power: 1.5 kW Speed: 1,500 rpm Speed control range: 150 to 3,000 rpm Shaft diameter: .... mm Diameter of attachment gear: 40 mm Iedpfxjhgbtvo Ahyebc Shaft length: mm Attachment diameter: 140 mm Bolt circle diameter for clamping screws: 110 mm Controller Weight: 22 kg Dimensions: 340 x 240 x 180 mm Several motors available

Condition: ready for operation (used), Danfoss OMR 200 151-0214 hydraulic motor, used, in good condition, 100% functional, scope of delivery as per photos. Iedpfx Aoy Nn Nlohyobc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,193 h, functionality: fully functional, machine/vehicle number: 71, total length: 13,000 mm, total width: 5,700 mm, total height: 4,300 mm, overall weight: 35,000 kg, hopper volume: 5,000 l, rotational speed (max.): 45 rpm, rotational speed (min.): 45 rpm, power: 404.52 kW (549.99 HP), year of last overhaul: 2024, The machine is immediately available + a second set of shafts is included!!! Iedpfoz Rmwmsx Ahysbc If interested, please contact us by phone or email. Inspection is possible! -In July 2024, new hydraulic pumps and motors were installed at 3014 operating hours. The complete hydraulic system was converted from Danfoss to Bosch, including an additional oil cooler. Currently: 1179 hours of operation with the new pumps. The cost of the conversion was €67,000. Service: Kurz GmbH (at 2516 operating hours) Service: Engine oil + filter & fuel filter (July 31, 2024, at 3111 operating hours) Service: Engine oil + filter & fuel filter (May 8, 2025, at 3772 operating hours) Service: Engine oil + filter & fuel filter (November 6, 2025, at 4106 operating hours) -Taken out of service on March 27, 2026. -Operating hours in March 2026: 4193 hours. -A second set of shafts is included.

Year of construction: 2011, condition: used, Rated current: 95A, connected load: 53kW, an on-site inspection is possible. Iodpfjz S Ivasx Ahyobc

Condition: ready for operation (used), Refrigeration Compressor, Danfoss Refrigeration Compressor,Cooler compressor Manufacturer : Danfoss Type : SM185s4rc Iedpfx Ahjw H Tgioyjbc Overall dimensions : 317 x 678 mm Brand new Refrigerant: Freon Capacity at +10 °C / +40 °C: 57 kW Capacity at 0 °C / +40 °C: 40 kW Capacity at -5 °C / +40 °C: 33 kW Capacity at -10 °C / +40 °C: 27 kW Capacity at -20 °C / +40 °C: 17 kW Note: R404a – R22 or other Freon types

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Ibedpfx Aheziazwjyjc Choice of 4, price per unit.

Condition: excellent (used), Year of construction: 2012, operating hours: 43,000 h, Arburg 470-1500-400 injection molding machine, manufactured in 2012, in very good technical and visual condition, fully operational. Used for processing PP. Injection unit: Screw diameter: 40 mm Injection volume: 184 g Injection pressure: 2000 bar Ibodpfxez Rkcyj Ahyjc Clamping unit: Clamping force: 150 tons Distance between tie bars: 470x470 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Euromap 12 Robot interface 1x hydraulic core 1x air ejector Hardened injection unit - bimetal

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel Iodpfx Ahjywuzwsyjbc - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch, pressure switch, low pressure switch, pressostat Ibjdpfxjqlguko Ahyoc -Manufacturer: Danfoss, pressure switch unused in original packaging -Type: KP 17B Item number: 060-1268 -Control range: -0.2 - 7.5 bar -Quantity: 1x pressure switch available -Price per piece -Dimensions box: 130/140/H50 mm -Weight: 0.5 kg

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. Ibedpfsz Hyyfex Ahyoc The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. Iodsz Iy Hzepfx Ahyjbc 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 5,004 h, load capacity: 1,800 kg, lifting height: 3,350 mm, fuel type: gas, mast type: duplex, construction height: 2,150 mm, empty load weight: 2,790 kg, drive type: Treibgas, Gas-powered forklift Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 40 - 60% Ijdpfx Aoz Sic Aohyebc Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: Front forklift - gas-powered forklift OM G18 - - - 5004 operating hours according to the display - - Year of manufacture 2000 - - 1.8 ton lifting capacity - - 3.35m lifting height - - 2.15m overall height - - Side shifter - - Duplex free-lift mast - - 3-cylinder OM-Fiat engine - - Solid rubber tires, front approx. 50%, rear approx. 70% - - - Power steering - - - New service performed - - - Very maneuverable forklift - - - Good condition Side shifter, 3rd valve, front work light, overhead guard.

Condition: new, Three-phase motor Manufacturer: Danfoss Type: VCM 330/M21 R1 L 2T 192 H 1514 400 Volts 3 kW 6.4 Amps 3000 rpm Equipped with frequency inverter Danfoss 0 - 7560 rpm Unused, in opened original packaging Transport dimensions: Length: 350 mm Width: 195 mm Height: 270 mm Ibsdpfjxughzjx Ahyoc Weight: 29.5 kg

Condition: excellent (used), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat Ibedpfxelc Uh Es Ahysc -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Year of construction: 2001, condition: used, functionality: fully functional, Used Paragon Cox H20 vacuum twin-shaft mixer/disperser with hydraulic lift and drive for sale Product-contact parts made of stainless steel Complete with hydraulic system Isdpfjz Eb R Asx Ahyobc Control cabinet not included Manufacturer: Cox Paragon Year of manufacture: 2001 Product-contact parts made of stainless steel 1 x 3-blade adjustable butterfly mixer (6 mm thick), max. 400 rpm SAI GM2-300 D40J 50 kW hydraulic piston motor 1 x High-speed dispersing mixing head, approx. 1000 rpm Sauer-Danfoss MMF046C 45 kW axial piston hydraulic motor Hydraulic power unit main motor: 30 kW, 1465 rpm, 400/660 V 2 x 210-liter mixing vessels + hydraulic press head Mixer can be hydraulically lifted by approx. 100 cm

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply Iodpfx Ahezzz N Hsysbc - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm Iedpfx Ajwldupjhyebc -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate Ibedpfoz I Dvyox Ahyjc - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch unused in original packaging -Type: KP 77 060L1121 -Temperature range: 20 to 60°C -Quantity: 1 thermostat available -Dimensions box: 140/130/H50 mm Ibodpfx Asqlgu Sshysc -Weight: 0.5 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Iedpfxszudabe Ahyebc Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Year of construction: 2001, condition: excellent (used), functionality: limited functionality, Used Paragon Cox H55 hydraulic lifting and driving vacuum double shaft mixer, disperser for sale The contact parts of the mixer are made of stainless steel With complete hydraulic system Iodpfx Ahjzzknloyebc Without control cabinet. Manufacturer Cox Paragon Year of manufacture 2001. The contact parts of the mixer are made of stainless steel 1 pc 800mm dia 3 blade adjustable butterfly mixer max 400rpm SAI GM4-1000 D40J 100kw hydraulic piston motor 1 pc high speed dispersing mixing head ca: 1000rpm Sauer-Danfoss MMF046C 45kw axial piston hydraulic motor Hydraulic power unit main motor 55 kw 1440rpm 400/660volt 2 pcs 480 liter mixing vessel + 4 pcs stainless dosing rings + hydraulic press head. The mixer can be raised hydraulically by approx. 120 cm

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05/2020 Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connected Load: 53.5 kW Iedpjzhar Hofx Ahyobc Pump Operating Hours: 8555 40 mm plasticizing cylinder set (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Price: €48,000.00 Available from the end of December 2026. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2007, Gardner Denver VLT 40 oil-free vacuum pump, 150 mbar, 1.5 kW Manufacture: Gardner Denver Type: VLT 40 (01) Year of manufacture: 2007 Total: 1.5 kW Speed: 1420 r/min Ibedpfsufiq Ejx Ahyjc Weight: 52 kg Air delivery: 42/50 m3/h Max vacuum: 150 mbar IP55

Condition: used, Year of construction: 1983, Sideshift, side lift, forklift blade Ibjdpfx Aotzf Rbshyoc -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg

Condition: used, Year of construction: 2017, gearing type: other, first registration: 01/2017, color: black, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Available: 5 units! Sauer-Danfoss SPV2/089-R6Z-PS183-CXX-B1 mixing hydraulic pump! Includes mounting frame, filter, and cooler from Agro-Hytos! Iodpfxekt Nkge Ahyebc Direct mounting to the engine PTO! Removed from a Daimler-Benz Arocs 3343 S 6x4 with rear engine PTO, flange 100, 650 Nm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!