Used Cronosstech 125 Tons D Type Eccentric Press Machine for sale (110,674)

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a hydraulic rubber vulcanization press manufactured by DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO., LTD, Taiwan, model D-TEA 22, produced in 1978. The machine is engineered for rubber processing applications, specifically for vulcanization using hydraulic pressure. We have two identical DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO. D-TEA 22 hydraulic rubber vulcanization presses available. Each press is equipped with 6 plates, making them ideal for vulcanizing 6 rubber or EVA foam sheets simultaneously. The plate dimensions are 105 x 100 cm. The main piston has a diameter of 60 cm. The total height of each press is approximately 350 cm, with a length of 100 cm and a width of 150 cm. During operation, we consistently used operating pressures of 120-160 bar. Bwedpfx Ajyqx A Rsk Eel

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Bodpfx Akjmr Hpcj Eowl Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel X-axis: 5,300 mm Travel Y-axis: 1,500 mm Travel Z-axis: 2,000 mm Control: HEIDENHAIN TNC 415 B Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 - 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 - 10,000 mm/min Rapid traverse: 15 m/min Number of tool changer positions: 24 Bjdpfx Ajy Dg I Njk Eswl MACHINE DETAILS Total power requirement: 70 kW Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatically swiveling milling head vertical/horizontal 2 x 180° Milling head on the rear axis swivels automatically 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended transverse travel (Y-axis) 1,500 mm Extended vertical travel (Z-axis) 2,000 mm Various maintenance documentation

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 77000 € 1455.3 € 70 to 4 mm 920 mm 500 mm 180 mm 12 - 120 mm 50 - 80 1/min 8 80 mm 260 mm 560 mm 7.5 kW 1225 mm 1865 mm 3060 mm 7000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment Bwedpfoyq Snmox Ak Esl - die safety controls - alarms view - overload protector

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Bjdey I Dg Rspfx Ak Eswl Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 table surface area 2.200 x 750 mm max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2021, functionality: fully functional, For sale: Metal Stamping Press JINAOLAN ALP-25V (25T, 2021) Condition: Brand new, never used, original packaging. We use several of these presses in our factory—photos show those units. Two brand new units available. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25V Bodpexniw Sofx Ak Eowl Year of Manufacture: 2021 Modern CNC-controlled eccentric press designed for forming, stamping, and punching various metal components. The press is equipped with a high-level operator safety system (Laser Safe), ensuring maximum operational safety. Technical Specifications: - Rated Capacity: 25 tons - Stroke Rate: 60–140 strokes/min (SPM) - Stroke Length: 60 mm - Max Die Height: 200 mm - Die Height Adjustment: 50 mm - Slide Area: 470 × 245 mm - Bolster Area: 680 × 300 mm - Main Motor: 2.2 × 4 kW - Max Air Pressure: 0.51 MPa - Max Tool Weight: 0.30 t - Control: CNC (programmable control unit) - Safety System: Laser Safe – two-hand control system Application: This press is suitable for stamping, punching, bending, and forming metal parts. Thanks to CNC control and precision mechanics, the machine ensures high productivity, repeatability, and safety. Ideal for small and medium-sized manufacturing, metal component, and forming part production. Advantages: - Completely new, factory-sealed equipment - CNC control: precise and user-friendly programming - Laser Safe system: press can be lowered only when both hand controls are activated (two-hand safety) - Reduces risk of injury, complies with stringent safety standards - Robust construction and stable eccentric drive - 2 brand new presses in stock + several used units in operation If you have further questions, we are happy to answer them.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Bwedpfx Akexmline Esl

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,300 h, The D10x15 S3 is a compact, mid-sized horizontal directional drilling rig that enables precise drilling in the ground, accurately controlling both direction and depth. This makes it ideal for small to medium-sized utility, service, and installation projects – such as laying fiber optic cables, power cables, or utility lines. Key Features - Compact size and efficiency - Power and performance Diesel engine with approximately 60 hp (44.7 kW) – powerful drive. Traction force: approximately 44.5 kN – high thrust and pulling force. Bwodjy It S Aepfx Ak Ejl Maximum torque: approximately 2,030 Nm – ensures secure drill head holding. Performance and productivity - High conveyor belt speed → faster work. - Low noise level – more pleasant working environment (e.g., in urban areas). Other useful features - Slim design – easier setup in confined spaces. - Standard hydraulic pull-out system – for pulling out drill rods, pipes, etc. - Large quantity of portable drill rods – up to approximately 91 m in length in a row. - Horizontal directional drilling (HDD) is primarily used when: ✔ complete excavation of the surface is not possible or advisable (e.g., under roads, sidewalks) ✔ cables, pipes, fiber optics, or conduits need to be laid underground ✔ the construction site is located in an urban/densely populated area ✔ fast, precise installation with minimal surface disturbance is desired.

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES Bwedpfx Aksfrzlme Eel - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection Bodpfxjtx E Rqe Ak Ejwl - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Bwedpfsy Idhhjx Ak Ejl Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Pressure capacity: approx. 20 tons -Insertion height: 345 mm Bwjdpfsyxda Sex Ak Eol -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: ready for operation (used), Year of construction: 2009, Available immediately ex location: CNC bed-type milling machine Iberimex Model Ecomill BF 2600 Year of manufacture 2009, low operating hours Heidenhain iTNC 530 Table 2700 x 1050 mm Travel ranges X/Y/Z 2600/1000/950 mm Table load 6 t Internal coolant supply (IKZ) 14 bar Hydraulic tool clamping SK 50 spindle taper Spindle speeds 24 - 1600 rpm Spindle drive 25 kW Bsdpfoy I Rawsx Ak Eowl Chip conveyor Weight 14 t Price: €21,000 plus VAT, ex location.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Bwjdpeyzf Naefx Ak Ejl Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, x-axis 4000 mm y-axis 2500 mm z-axis 1600 mm w-axis 800 mm Control Heidenhain iTNC 530 table-size 1800 x 2200 mm table load capacity 20 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwedsy Hxp Rjpfx Ak Esl Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm Bwedpfx Asy I Dd Nok Eol stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm ram - range of adjustment 85 mm hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm weight of the machine ca. 3,2 t Bwjdpfey I Ddvex Ak Eel

Condition: not inspected (used), functionality: unexamined, power: 200 kW (271.92 HP), Equipment: documentation/manual, We are offering a Mecolpress press for sale. Please see the attached photos for the specifications and current condition of the machine. Documentation for the machine is available. If there is any interest or if additional information is required, you are welcome to send a message or email. For information: a used automation system and a Farm Brass oven are also available if required. Bedpfoy I A D Iex Ak Eswl

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Bsdpfjy Hqz Sjx Ak Eswl Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Bwsdpfx Asy Iwr Tek Eel Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Bodev Rw Uuepfx Ak Eowl Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication Bwsdpfx Akeun Nnqs Ejl - Ball screws (IT5) in all axes - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team. Bjdpfxexgn Efj Ak Eowl

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Maximum drive power, from 198 rpm: kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions Bsdpfx Aeygipajk Eowl 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. Bwsdef Sqcyopfx Ak Eol All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.