Used Coralli 65 for sale (7,748)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Iodsytpbijpfx Apcjbb Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Ijdoz Digpspfx Apcsbb Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Ibodszfkbajpfx Apcob Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: used, mileage: 764,033 km, power: 338 kW (459.55 HP), first registration: 05/2016, tire size: 385/65 R22.5, axle configuration: 4x2, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: central locking, cruise control, electric window regulation, parking heater, power mirror, soot filter, spoiler, = Additional Options and Accessories = - ADR - CD player - Roof spoiler - Hydraulic tipping kit - Aluminum fuel tank - Refrigerator - Particle filter - Headlights - Standard air conditioning - Sun visor - Alternating current - Toolbox = Further Information = Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Alloy wheels; Steerable; Tire tread depth left: 3 mm; Tire tread depth right: 3 mm; Suspension: Leaf spring suspension Ibedpfx Apoz Dklgocjb Rear axle: Tire size: 315/70 R22.5; Dual tires; Tire tread depth left inside: 3 mm; Tire tread depth left outside: 3 mm; Tire tread depth right inside: 3 mm; Tire tread depth right outside: 3 mm; Suspension: Air suspension Unladen weight: 7,832 kg Payload: 11,168 kg GVW: 19,000 kg Damage: None

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Iedpfx Apszr Nmbjcsbb Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: used, Year of construction: 2008, bar material dia. 65 mm turning speeds 5.000 min-1 Number of working hours 34979 h spindle hours 72260 h control FANUC 310 i weight of the machine ca. 8800 kg dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Ibsdpfjyat Hvex Apcjb Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 600 mm, turning diameter: 310 mm, spindle bore: 65 mm, spindle speed (max.): 4,200 rpm, torque: 192 Nm, overall weight: 3,900 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, Equipment: rotational speed infinitely variable, The machine is powered on and can be inspected at any time by appointment. Ibodezg U Itspfx Apcjb

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,700 h, DMG vertical machining center Model DMC 65 V Year : 2002 X - Y - Z travel : 650 - 500 - 500 mm. Iodexqch Aspfx Apcjbb RPM : 18000 Tool change : 30 pcs. Spindle taper : ISO 40 Control : MILL PLUS Syncronspindle Hand wheel for axes travel Interface RS-232 C Coolant

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Iedpfx Aouiq Dhepcsbb Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Workpiece and profile stop good condition cleaned function tested partially refurbished Manufacturer: Festo Type: UP 65 Machine No.: 771226 Number of spindles: 1 Spindle diameter mm: 40 Clamping height / width mm: 200 Working width mm: 200 Profile depth mm: 65 Isdpfxozkvyro Apcebb Milling height mm: 110 Tool diameter mm: 250 Rotational speeds RPM: 4300 Table size mm: 660x350 Lift table pneumatic Profile stop Workpiece clamping pneumatic Motor kW: 7.5 Dust extraction connection mm: 100 Space requirement approx. L x W x H mm: 1300x700x1200 Total connected load: 7.5 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: used, Year of construction: 2007, Number of working hours 20456 h spindle hours 75180 h control FANUC 310 i chuck diameter 175 mm turning speeds 5.000 min-1 weight of the machine ca. 8800 kg dimensions of the machine ca. 4500 x 1990 x 2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Iodpoydfq Isfx Apcsbb Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural Ibedpfszk N U Nox Apcob - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), mileage: 629,849 km, first registration: 12/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 9,540 mm, total width: 2,480 mm, Year of construction: 2012, XLRAE65GC0E972247 Iedpfjymq Rfox Apcjbb = More information = Number of cylinders: 6 Engine capacity: 6.693 cc Empty weight: 7.280 kg Carrying capacity: 11.520 kg GVW: 18.800 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: 18-BBK-7 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), SPINNER TC600-65 SMCY | Year of manufacture 2012 | Y-axis | BMT45 | driven tools | Siemens 840D | 15 bar HPC For sale is a high-quality CNC turning center, the SPINNER TC600-65 SMCY, manufactured in 2012. Technical data: Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Type: TC600-65 SMCY Year of manufacture: 2012 Machine number: AT0560 Working area: • Max. turning diameter: 400 mm • Max. turning length: 650 mm • Max. swing diameter: 600 mm • Travel in X-axis: 275 mm • Travel in Y-axis: mm • Travel in Z-axis: 700 mm • Spindle bore: 65 mm Ibedpfezgvgksx Apcjb Tool system: • 16-position turret BMT45 • 16 driven tool stations • Spindle orientation • Tool measurement in the working area Control system: • Siemens 840D Equipment: • Y-axis for complex milling and drilling operations • 16-position BMT45 turret with driven tools • Direct measuring system in the X-axis • Tailstock • High-pressure coolant system 15 bar • Automatic sliding door • Robot interface for automation solutions • Hardened and ground slideways • Heavy-duty, FEM-optimized machine bed made of cast iron • High vibration damping for precise machining results Electrical data: • Mains connection: 400 V • Frequency: 50 / 60 Hz • Operating current: 53 A • Rated current: 63 A ✔ Y-axis and driven tools for complete machining ✔ Automation-ready via robot interface ✔ Powerful Siemens Sinumerik ONE control system Bar loader: CUCCHI GIOVANNI CNC-DB70 Stand loader 3300mm, 12-70mm diameter Year of manufacture 2012 is included in the price. The machine is in technically perfect and well-maintained condition and can be inspected under power by appointment. Further technical documentation, accessory lists, videos, as well as information on price and availability are available upon request.

Condition: like new (used), Year of construction: 2005, Baublys BL 65 S / 500 NC Baublys BL 65 S / 500 NC, year of manufacture 2005, in very good original condition. The machine comes from the production of a renowned German mechanical engineering company. Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year of manufacture: 2005 Ibsdpsw Eytuofx Apcob Laser: 150 Watt Laser type: Q-switched, pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupler mirror at TEM00 Beam divergence: 5 mrad TEM00 Pulse duration: CW / 90 ns Max. output power: 65 W multimode 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line thickness (mixed mode): approx. 0.12 mm Deflection speed: 3 m/s; equivalent to 200 characters/sec with 1.5 mm height and single-line font Power Supply Voltage: 400 V, three-phase 50 Hz, 3 phases, clockwise rotating field Connection: 5-pin CEE plug, 16 A, 6h Max. power consumption: 8.5 kW, max. 16 A per phase Fusing: 3 x 16 A slow blow Water Connection Cooling water flow rate: 7.5 l/min at 20°C supply temperature Discharge connection: Thread G 3/4” male thread Heat load: approx. 6.5 kW Max. cooling water temperature at inlet: 20°C Water consumption: dependent on inlet temperature Outlet temperature:

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, turning diameter: 380 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, rotational speed (max.): 5,000 rpm, torque: 465 Nm, bar passage: 65 mm, workpiece weight (max.): 300 kg, total height: 1,857 mm, total length: 2,760 mm, chuck outer diameter: 203 mm, total width: 1,835 mm, bar diameter (max.): 65 mm, swing diameter over bed slide: 695 mm, overall weight: 5,600 kg, Equipment: chip conveyor, fume extraction, CNC lathe MAZAK Quick Turn 200MY (year of manufacture 2021) Iodpszkbfgefx Apcobb You are welcome to inspect the machine while it is powered on at our facility. If you are interested, we will send you demonstration videos of the machine. The MAZAK Quick Turn 200MY is a powerful CNC lathe for the precise and efficient machining of chucked parts in a universal application (500U). With a maximum swing diameter of approximately 695 mm and a maximum machining diameter of approximately 380 mm, the machine is particularly suitable for demanding turning operations in general mechanical engineering as well as in series and single-part production. The robust design with travels of 234 mm in the X-axis and 625 mm in the Z-axis, as well as a bar capacity of approximately 65 mm, enables the flexible accommodation of a wide variety of workpiece geometries – with a maximum payload in chucking operations of 300 kg and a maximum loading weight of 500 kg. The powerful main spindle with an 8″ chuck size and up to 5,000 rpm ensures high cutting performance and precision. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. The 16-tool turret (VDI 40, quick-change function) enables flexible and efficient machining processes, even for complex manufacturing tasks. The tailstock (MT No. 5, 550 mm travel) provides additional secure support for long workpieces. For further process reliability and automation, the machine has an automation package (part catcher as well as interface/connection option for robots and bar feeders). An LLS coolant mist extraction system (low maintenance costs) and a chip conveyor from Mayfran also ensure optimal production conditions. With a machine weight of approximately 5,600 kg, the Quick Turn 200MY offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, it is a modern and versatile CNC lathe that guarantees high precision, performance, and reliability in industrial production. On request, we offer delivery as well as commissioning of the machine in a comprehensive, worry-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Iodpfx Aezz A Iwopcsbb Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Automatic material measurement Cutting diagram for Crossline 650, 650M

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: Ijdsztl Scepfx Apcsbb - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 810 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, We offer this used Mori Seiki NZ2000 CNC turning and milling center, manufactured in 2011. Isdpfx Apez A S Uyjcjbb Fully automated twin-spindle production cell with FANUC robot, PROMOT Automation, and TOP XF380 bar feeder. Year of manufacture: 2011 For sale is a MORI SEIKI NZ2000 T2 CNC turning machine as a complete, automated production cell with PROMOT Automation, FANUC industrial robot, and TOP Automazioni XF380 bar feeder. This system is particularly notable for its exceptional automation concept, of which there are only two in Europe. The combination of main spindle, counter-spindle, two turrets, bar feeder, and robot automation allows different machining and material flow processes to be automated within a single system. The main spindle is supplied with bar material via the TOP Automazioni XF380 bar feeder. The bar capacity of the machine is 65 mm. Finished parts can be ejected on this side via the existing parts ejector. Simultaneously, the FANUC industrial robot with PROMOT Automation handles the automated workpiece handling on the counter-spindle side. The workpieces are placed on or removed from a rotary table with multiple workpiece holders. This enables highly productive simultaneous machining on the main and counter-spindle. The system thus combines practically two automated machining processes within a single production cell. Equipment / Highlights  MORI SEIKI NZ2000 T2  Year of manufacture 2011  Main and counter-spindle  2 turrets  Simultaneous machining capabilities  Driven tools  TOP Automazioni XF380 bar feeder, year of manufacture 2011  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Automatic material feed via bar material  Parts ejector on the main spindle side  PROMOT Automation robot cell, year of manufacture 2011  FANUC industrial robot  Automatic loading and unloading on the counter-spindle side  Rotary table / workpiece storage with multiple workpiece holders  Integrated safety device and protective enclosure  Fully integrated and coordinated production cell Technical data  Max. turning diameter: approx. 320 mm  Max. turning length: approx. 810 mm  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Spindle bore: approx. 73 mm  Max. spindle speed main and counter-spindle: up to 5,000 rpm  2 tool turrets  Driven tools  C-axis on main and counter-spindle  Design without Y-axis  Simultaneous machining on main and counter-spindle  TOP Automazioni XF380 bar feeder, year of manufacture 03/2011  Bar capacity of the entire system: up to 65 mm round material, limited by the particularity of the system. In contrast to a conventional NZ2000 T2, this is not simply a CNC turning machine with a robot added later. The system was designed as a complete, automated manufacturing cell. Bar machining and robot handling can be combined within the same machine. While one side performs machining of bar material via the main spindle, the counter-spindle side can be automatically loaded and unloaded via the FANUC robot. This concept enables high machine utilization and is particularly suitable for series production and low-manned or automated production operations. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2021, operating hours: 900 h, condition: like new (used), functionality: fully functional, spindle diameter: 200 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Ibodpfxezz Rt Ue Apcjb Chip conveyor: Mayfran belt type

Condition: good (used), DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 - 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range: +/- 120° Rotary range: 360° T-slots: 600 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip-to-chip time: 8.0 sec Feed rates: Rapid traverse: 40 m/min Ibedezqddxepfx Apcjb Feed force: 7/13/10 kN Feed rate: 1 - 40,000 mm/min Total power consumption: 24 kVA Machine weight (approx.): 11.5 t Space requirement (approx.): 4.5 x 3.5 x 2.3 m Documentation Coolant system Electric handwheel Laser head: 100 watts Laser hour meter: 6177 h / 2802 h Machine hour meter: 18703 h / 4738 h

Condition: used, mileage: 308,000 km, power: 375 kW (509.86 HP), first registration: 07/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Actros 2651 Tipper * Registered: 07-2012 * Drive: 6x4 * EPS with clutch Ijdpfx Aez Dd U Uepcobb * Retarder * Meiller 3-way tipper * On-board computer * Air conditioning * Tow hitch * Differential lock * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Ibsdpfx Aoxizanopceb

Condition: excellent (used), Year of construction: 2002, Seiger SLZ400E cycle lathe with Heidenhain Manual-plus control Turning length: 1000 mm Ibsdpfszttahjx Apcsb Swinging diameter over bed: 410 mm Swinging diameter over cross slide: 200 mm Bed width: 330 mm Tailstock spindle diameter: 65 mm

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Iedsyln Ekepfx Apcebb