Used Compressed Air Vacuum Cleaner for sale (26,621)

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Njdpfxsfmim Uo Aa Djwg Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Njdpeh U Dtuefx Aa Dewg Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Nwjdswypqropfx Aa Dsg Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours. Nodpfxjiyu Ifs Aa Dewg

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Nwodpfx Aehalvdea Dsg Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Siphon Sandblaster with Vacuum Cleaner P120 The P120 siphon sandblaster with vacuum cleaner is a professional device designed for sandblasting, cleaning, and preparing metal surfaces. The machine is intended for use in workshops, production plants, automotive service centers, and companies specializing in the renovation of steel components. Thanks to the use of a siphon system and an industrial vacuum cleaner, it enables efficient and cleaner dust-reduced sandblasting. The P120 siphon sandblaster with vacuum cleaner features a mobile cart-style construction with wheels, allowing the device to be easily moved around a workshop or production facility. A durable steel housing ensures long service life and resistance to intensive use, while the ergonomic sandblasting gun allows comfortable and precise operation. Key Features of the P120 Sandblaster Siphon sandblasting system – efficient and economical abrasive consumption. Integrated industrial vacuum cleaner – effective dust extraction during sandblasting. Low-dust sandblasting – greater work comfort and a cleaner workspace. Mobile design – transport cart with wheels for easy movement of the device. Sandblasting gun with working hose – convenient operation and precise surface cleaning. Durable steel housing – high durability and resistance to intensive use. Compatible with various abrasives – sand, aluminum oxide, steel shot, and technical glass media. Professional application – workshops, industry, and metal restoration. Why Choose the P120 Siphon Sandblaster The P120 sandblaster with vacuum cleaner is a modern solution for companies that require efficient equipment for abrasive blasting. The combination of siphon sandblasting technology and industrial dust extraction allows effective surface cleaning while significantly reducing dust at the workplace. The device is ideal for preparing steel components before powder coating, painting, welding, or further processing. Thanks to its mobile design and user-friendly operation, the P120 workshop sandblaster is a practical piece of equipment for any professional workshop. Applications of the P120 Siphon Sandblaster Removing rust from steel components Cleaning metal before painting or coating Removing old paint and protective coatings Matting metal surfaces Restoration of car and motorcycle parts Cleaning tools and machine components Surface preparation for welding or powder coating Standard Equipment Mobile P120 siphon sandblaster Integrated industrial vacuum cleaner for dust extraction Sandblasting gun Nwodpfx Aaeyufr Hj Djg Sandblasting working hose Brush extraction nozzle Dust extraction system Transport wheels for easy movement of the device Technical specifications Vacuum cleaner motor 1200 W / 230 V Capacity 20 l Air consumption approx. 167–283 l/min Operating pressure 6–8 bar Nozzle diameter 7 mm

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C Nwodetqt Uxjpfx Aa Deg The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner type CTS40 M Z22 400 C 4 kW Nodpfehu Sf Hox Aa Dswg 9 A 50 Hz 114 kg Ex-proof The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 2001, condition: good (used), Price Negotiable All prices plus VAT Machines purchase / sale Nedpfshpqyvjx Aa Dewg PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain Nedpoyif I Ujfx Aa Dewg - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: ready for operation (used), WIRBEL K 855 HP 7.5 Industrial Dry Vacuum Cleaner - CE marking Njdpfsyplhqsx Aa Djwg - As-new condition - Motor power 5.5 kW - Filter area 1.2 m2 - Container capacity 60 litres - Airflow 135 L/sec - Vacuum (negative pressure) approx. 300 mbar - Suction hose - Power cable Dimensions (LxWxH): 1.2 x 0.6 x 1.3 metres / Weight 125 kg Errors and omissions excepted

Condition: new, Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 13943/08, overall weight: 1,660 kg, tank capacity: 500 l, Equipment: CE marking, The S-4, manufactured in series production, is a very compact mobile suction unit. Its impressive suction power allows conveyed material to be transported at considerable transfer speeds over long distances using flexible hoses with an 80 or 100 mm diameter. The high-tech filtration system, featuring three-stage serial separation and a pneumatic AirShock® filter cleaning device, ensures constant high suction performance even with challenging dust types. The collection container is hydraulically raised to its working position and discharges the extracted material into BigBags or open containers. Special versions are available with ATEX-compliant explosion protection and nitrogen cooler for catalyst handling. The S-4: the compact unit with exceptionally high suction power, produced with series production quality. Nwedpfexyq Ngox Aa Dog

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank Nwedophun Espfx Aa Dsg -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: excellent (used), Volume flow 3000 Pressure 3400 Pa Nsdoilug Sjpfx Aa Dewg Filter 30 m2 Spindle speeds 2850

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Year of manufacture: 2010 The dryer is fully operational. Nsdpeymmbtjfx Aa Dewg

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Max. compressed air pressure: 14 bar Nwodpfx Ajydlycea Djg Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Nedomt Dcxjpfx Aa Djwg Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, overall weight: 50 kg, total width: 508 mm, total length: 686 mm, total height: 991 mm, input voltage: 240 V, tank capacity: 38 l, noise level: 68 dB, input current: 5 A, Equipment: chassis, type plate available, Dynabrade 61431 Raptor Vac Electric Portable Vacuum System, 230V (ATEX Cat. 3 for Zone 22) SYSTEM INCLUDES: • Two 6 m (20') conductive coaxial hoses with integrated air lines • "Y" connectors • Two composite couplings • Two swivel adapters for vacuum hoses • Disposable collection bag • Conductive polybag • ATEX Category 3 for Zone 22, suitable for areas where hazardous dust is not normally suspended in the air in ignitable concentrations, but may accidentally occur. • Designed for general purpose spot extraction and cleaning. • Powerful suction power, ideal for industrial applications with dry materials. • The bypass motor system uses clean air to cool the motor, extending the life of the vacuum. • Includes HEPA H14 filter with 99.995% efficiency at 0.3 microns. • Two additional HEPA filters in the motor head, making it IP6X rated. • High-quality stainless steel housing and 38-liter collection container. Nedpfxsv Uxxcs Aa Djwg • Unit is static dissipative (kit included) and conductive. • Aerosol leak test performed for quality assurance. • Equipped with a smooth-running trolley. • Protection against dust explosions. DYNABRADE Description: Safety and fine dust capture are the specialty of Raptor Vac Category 3 Clean Air Solutions. From the motor head to the collection container, every component plays a role in fire prevention and fine dust capture. Category 3 Raptor Vacs are used to vacuum non-metallic dusts such as wood, composite materials, and plastics generated during sanding operations. The powerful extraction supports two operators simultaneously in dry industrial applications. Two additional HEPA filters in the unit make it IP6X rated and provide additional dust protection for electrical components. IP6X - defined as completely dustproof tested.

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters Nwedpfx Ajvcl Sloa Dog - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. Nedpfexbzaljx Aa Dowg UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Nodpfx Ajmt Dcqsa Dewg Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. Nwsdpfx Ajxby D Asa Dsg UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. Nsdpfemt Dbhjx Aa Dewg The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Nsdpfx Aaemt Dcfs Dswg Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 YEAR: 2007 POWER (kW): 8.7 Njdpfxjykvpho Aa Dowg CAPACITY (m3/min): 45 PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL):