Used Christen Drill Grinding Machine for sale (65,525)

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, Juaristi MX-7 JUARISTI MX-7 – Year of manufacture 2006 • X-axis: 8000 mm • Y-axis: 4000 mm • Z-axis (RAM): 1000 mm • W-axis spindle travel: 800 mm • Fixed table / Floor plates: 8000 x 4000 mm • Table load: 80,000 kg • Spindle diameter: 180 mm • Spindle power: 41 kW • Spindle torque: 2024 Nm • CNC control: Heidenhain iTNC 530 • SK 50 tool holder • Tool changer with 30 positions Bedey Udu Iepfx Anmewr • Automatic tool changer (ATC) • Swiveling head • D’Andrea turning head • Internal and external coolant • Siemens feed motors • Absolute Heidenhain measuring system • Automatic clamping of RAM accessories • Hydraulic-electronic RAM compensation system • Independent, vertically movable operator platform • Chip conveyor • Full protective cabin / Complete enclosure • Complete original documentation available

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Bedpfxszq R Dfo Anmewr Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: good (used), grinding length 600 mm grinding width 200 mm Bwjdpfx Ansxb Eg Ajmsr max. dia. of grinding wheel 220 mm magnetic clamping plate 500 x 200 mm total power requirement 4,2 kW dimensions of the machine ca. 2 x 1,3 x 1,8 m

Condition: good (used), grinding diameter 450 mm Bsdpfxjxcblqj Anmewr grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Bwsdpfxsylp A Ds Anmer Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, grinding length 600 mm grinding width 200 mm workpiece height 250 mm Bsdpeu N I Nkofx Anmewr grinding wheel diameter 200 mm grinding wheel width 20 mm weight of the machine ca. 1000 kg dimensions of the machine ca. 2000 x 1200 x 1650 m

Condition: repair required (used), bore capacity in steel diameter / mm Bsdsvmtlhopfx Anmjwr arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Bwsdpfxsw I Uy To Anmsr Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: good (used), - Ready for immediate use - Feed speed: 0.5 - 5 m/min - Glass thickness: 3 - 55 mm - Can mitre grind up to 45° Bwjdpfx Anstqr Hpemer - 13 grinding and polishing wheels - Complete documentation available - Weight: 5700 kg - Has been regularly serviced and operated with a water treatment system, - very clean machine - Connected loads: 26 kW, 400 V, 50 Hz, 6 bar

Condition: good (used), Extremely stable and heavy-duty sanding machine suitable for daily and continuous production. The machine is designed for durability and precision thanks to its robust and first-class materials. - Type: 111F Bjdpfeq Dp Dxjx Anmswr - Serial number: GG111F-22160 - 11 spindles - Year of construction: 2016 - Glass thickness: 3 - 50 mm - Min. dimension 40 x 40 mm - Machine dimensions: 11250 x 1800 x 2700 mm - Sanding profile: Flat edge with seam - Number of wheels o 3 diamond wheels edge o 1 diamond wheel rear edge o 1 polishing wheel rear edge o 1 diamond wheel front edge o 1 polishing wheel front edge o 4 polishing wheels edge - Operating pressure: min. 6 bar - Working height: 800 mm - Weight: 3,600 kg - Machine control via central display - Running direction: right - left - Feed speed: 0.6-6 mtr./min. - Connected loads: 400V, 50 Hz, 10A - 2x available - Machine was operated with central water treatment, is sold without water tray and pump.

Condition: reconditioned (used), Year of construction: 2011, machine/vehicle number: GG110C 19624, total length: 8,355 mm, total width: 1,550 mm, total height: 2,700 mm, overall weight: 3,600 kg, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, working height: 800 mm, power: 27 kW (36.71 HP), pressure: 6 bar, year of last overhaul: 2026, Straight-line edging machine for heavy-duty production; equipped with 3 diamond grinding wheels, allowing for the processing of glass up to 50mm thick. Minimum glass dimensions: 40x40mm; Glass thickness: 3-50mm; Speed: 0.6-6 m/min; Installed power: 27 kVA; Weight: +/- 3600 kg. Bwodpfx Aozq Dkrjnmer

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, grinding belt speed: 33,000 mm/s, total height: 1,000 mm, total length: 940 mm, total width: 510 mm, overall weight: 120 kg, grinding width: 150 mm, warranty duration: 12 months, WBG150 - ROGI belt sander, 400V - 3-phase Sanding belt ----- 150 x 2000 mm Belt speed ----- 33 m/s Motor ----- 4 kW Weight ----- 120 kg INCLUDES Bjdpfx Aoga T Ihjnmjwr * Sturdy base frame * Sanding belt

Condition: new, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 210 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, total height: 1,120 mm, total length: 710 mm, total width: 890 mm, type of input current: DC, overall weight: 240 kg, table length: 840 mm, table width: 210 mm, power: 1.5 kW (2.04 HP), distance table to spindle center: 360 mm, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Bwsdpfxoga T Age Anmor Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed, stepless 50 - 3000 rpm Spindle travel ----- 70 mm Spindle mount ----- ISO 30 Work table ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Overhang ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill chuck incl. drill shank * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling vice * ISO30 collet chuck & 12 collets in case * Milling set

Condition: used, Year of construction: 2003, max. grinding length 2000 mm max. grinding width 1000 mm max. working height with new grinding wheel 600 mm max. workpiece weight 3200 kg max. table load 4500 kg Clamping area 2860 x 1000 mm Grinding spindle drive 26 kW Spindle speeds 1000 - 3000 rpm Transverse feed rate 1 - 5000 mm/min Vertical feed rate 1 - 5000 mm/min Smallest programmable value 0.001 Bwedpfjzn Imxsx Anmjr Cooling unit Mechanical extraction system Paper band filter system Grinding wheel balancing system Pneumatic folding dresser Control system ABAMATIC 1 N.D.

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Bjdpfx Anotzkgbomowr Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: new, Year of construction: 2025, With the ML/MLW Z multi-grinding stations, up to eight individually adjustable grinding stations can be arranged in sequence. This allows you to efficiently perform the entire machining process—from initial grinding to polishing your workpieces—in a single operation. Diameter from 4 to 350 mm Bwodpfx Anoww Ugyemsr Dry or wet grinding

Condition: ready for operation (used), spindle mount: MK 4, rotational speed (max.): 3,500 rpm, rotational speed (min.): 130 rpm, throat depth: 300 mm, Alzmetall AB 35 / S Drill press, column drill Pinole travel: 180mm Overhang: 300mm Spindle: MK 4 Drill chuck: 3-16mm Variable speed: 130 - 3500 rpm Bwedpfszqy I Tox Anmor Feed rate: 0.1 - 0.2 - 0.3 mm/rev Threading device Coolant unit Vise You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Bedpfeq Ii Dlsx Anmewr Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm Bsdpfxsw Iqdze Anmjwr - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width Bsdpszn Ah Rofx Anmowr - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition Bwedpfxoikrtqj Anmjr

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Bodpfxoxwaz Hj Anmjwr

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Bedjxnlfljpfx Anmewr

Condition: excellent (used), Year of construction: 2010, Maximum drilling diameter: 20 - 252 mm Drilling diameter in concrete: 20 - 202 mm Number of speeds: 3 Electrical connection: 220 V, 2300 W Bodpeznvrpjfx Anmowr Weight: 7.4 kg

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Bedpfx Aoznvibonmewr Outrigger height adjustment: 620 mm 23726