Used Canol L=700 for sale (66,508)

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Bjdpfx Aoyzy Iwjmysdf Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Bdodpfx Amsy Iu Raoyof Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning GMM software including: - Milling - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Bdsdpfx Amsu Tqmdjyef Above-standard productivity Adjustable bale height (three sizes) Automatic start for efficient compaction Bale trolley for easy transport Material selector for cardboard and plastic Full bale indicator and service indicator Compliance with EN 16500:2014 safety standards

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel Bsdpsgp Diaofx Amyjdf total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Bdedpfx Ameyk Tkveyef Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: refurbished (used), The EGLI 1700 Butter Churn is capable of a capacity of 900 litre of cream with a 60% butter output. The machine materials are stainless steel 316 L at contactable surfaces with the product. The gears and motors are covered with metal with a paint coating. The machine was used for very little after full refurbishment in 2022. New control panel for the start of the churn . Bdsdpfx Amox Nca Eoyef Butter Churn: EGLI Volume: 1700L total capacity Cream capacity: 850L S.N: DM1700UK Condition: Refurbished Available: immediately Location: In stock

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. Bedpfedd Tp Rsx Amysdf * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW Bdjdogv Aacepfx Amyof - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Bedpfxsyxl Sij Amyjdf Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge Bdodpfx Amsy Eglqjyjf OP-99031 Cable – AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Overall size 370x220x300 cm Total weight, approx. 15000 kg Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Bedpfsxt Ur Sox Amyodf Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Bedpfxeuqc Ngs Amyedf Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Year of construction: 2011, condition: ready for operation (used), A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible. Bodpey D Tpgjfx Amyjdf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2440x1360x2060 mm Bdodev A Hf Hjpfx Amyof Weight 3000 kg Total power requirement 42 kw

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Bodpsua Tbwofx Amysdf SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Bdedpfx Amey A Icrsyof Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, Langzauner LZG 1000/700/1400 long belt sander large projection 1000 mm table dimensions 2500 mm belt dimensions 6800 x 150 mm right left run 2 belt speeds 11 and 22 m/sec vacuum clamping device Bedpfx Amsr Axf Toyjdf lighting year of manufacture 1977 tested for functionality dimensions 3700 x 1200 x 1500 mm weight 950 kg price 2500.-

Year of construction: 2025, condition: new, Dosing system serial doser for the production of mineral mixtures, FSS, STS, KG 1/2 etc. semimobile unit, dosage, dosificación 4 chambers each about 22 m³, hourly output eff. 720 tons, , 900 recipes can be set, direct loading onto Trucks Bsdjgpk E Dopfx Amyedf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 500x550x1050 mm Bedpfxovz Hipj Amysdf Weight 80 kg Total power requirement 1,2 kw

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW Bsdpeymf Sdjfx Amysdf weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 2011, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Mori Seiki NL2500SY-700 Brand: Mori Seiki Model: NL2500SY-700 Category: CNC Lathe Year: 2011 CNC Control: Mori Seiki MSX-850 IV Machine weight: 6.2 tons Capacity Max. swing over bed: Ø 579.8 mm Max. swing over carriage: Ø 755 mm Max. turning diameter: Ø 356 mm Max. turning length: 705 mm Bar capacity: Ø 80 mm Axis travels X-axis: 260 mm Y-axis: ± 50 mm (100 mm total) Z-axis: 795 mm C-axis: ± 360° Bodpfx Amjyxmh Sjyjdf Main spindle Spindle diameter: 254 mm Speed: 4,000 rpm Spindle nose: ASA-8 C-axis indexing: 0.001° Power: 18.5 kW (cont./30 min) Sub spindle Speed: 5,000 rpm Spindle nose: ASA-6 C-axis indexing: 0.001° Power: 15 kW (cont./30 min) Turret 12 driven tool stations Tool speed: 6,000 rpm Tool power: 5.5 kW Turning tools: 25x25 mm Boring: Ø 50 mm Feed rates Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 10,000 mm/min C-axis: 400 rpm Accessories Static toolholders + 4 driven (2 radial, 2 axial) Chip conveyor + tank Top Automazioni – Magic bar feeder Electrical transformer Part unloading arm 250-liter coolant tank Manuals + electrical diagrams CE Declaration

Condition: excellent (used), Year of construction: 2020, operating hours: 2,139 h, functionality: fully functional, machine/vehicle number: NL257200651, turning length: 700 mm, turning diameter: 366 mm, spindle motor power: 19 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year: 2020 Condition: Excellent Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine hours: 7,598 h Program runtime: 2,139 h Details: Base machine: NLX 2500/700 with driven tools and C-axis Universal lathe with 3 axes Turning length: 700 mm Main spindle with integrated motor spindle ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW power (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping system (see clamping cylinder/chuck) C-axis with hydraulic spindle brake 10-station BMT turret 10-station driven tool turret NC tailstock CELOS® with Mitsubishi control M730UM Control: Mitsubishi M730UM controller with CELOS CELOS - ERGOline Touch Spindle: Main spindle (Spindle 1) standard Spindle options: Oil blower cooler for circulating coolant oil Chuck for main spindle: Main spindle (Spindle 1) 10" hollow chuck Ø254 mm Main spindle (Spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Chuck options: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-station BMT60 turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock taper for live center MK 5 (live center not included) Coolant / Chip removal: Use of water-soluble coolant (emulsion) Hinged belt chip conveyor, discharge right (500,700) Coolant system with increased pressure, 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Measuring / Monitoring: Manual tool presetter (swiveling, standard) Additional options: Customer voltage: 380 V Frequency: 50 Hz Metric setting SCHNEIDER transformer 45 kVA Bdedpsyxglksfx Amysf Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Condition: used, Year of construction: 1986, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Assortment of tools is included in the price Bedpfof Nwqdex Amyjdf Weight: 3,000 kg

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Support table on punch side with stops Assortment of tools is included in the price Bdodpfx Amoumluqeyof Weight: 3.000 Very good condition

Condition: used, Year of construction: 2001, Manufacturer: Klockner MediSeal Type: powder sachet filling line A – Bagging machine : Model : LA – 300 Year: 2001 Bag width: 50 mm mini / 300 mm maxi Bag length: 50 mm min / 250 mm max Volume per bag: 1 ml min / 120 ml max Output: min. 20 strokes/min – max. 100 strokes/min Packaging reel diameter: 600 mm Bdedpfxex R A Hhe Amysf Chuck diameter DIN 55470: 76 mm Machine dimensions: 150 x 200 (with packing reel) x 190 cm (without dosing system) Weight: 1,800 Kg Current format: double bag (70 + 70) x 120 Mould with cooling circuit B – Grouping machine C – Klockner cartoning machine :C - Encartoneuse Klockner : Model: P-700 Year: 2001 Operating mode: Cyclic Carton size : length: 75 – 200 mm width: 50 – 150 mm height 20-110 mm Production speed 15 – 70 cartons/minute GUK folding module Glue station: robatech