Used Bmf Fixators (28253) for sale (187)

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE Fsdpfsu D Udwex Ak Uopl With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Year of construction: 2002 Condition: very good Hablamos español Nous parlons français We speak English

Condition: used, mileage: 11,474 km, power: 130 kW (176.75 HP), first registration: 05/2025, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * Hill start assist * Exhaust system, EU6e (EA) * Towing eye, front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, left and right, convex, with LED turn signal and wide-angle view * Front-wheel drive * Emergency brake assist (Front Assist) * Battery 420 A (70 Ah) * Rubber floor in the cab * Wooden floor in the cargo area with wheel arch trim * Electronic parking brake * AGM battery (520 A, 92 Ah) and generator * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Operating voltage 12 V * Stone chip protection (with CO2 optimization) * H3 - High roof, painted in vehicle color * Springs and shock absorbers, reinforced base stabilizer * Rear step, across the entire width * Engine immobilizer, electronic * Parking assist (PDC) front and rear * Grab handles on the B-pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with assistance driving lights and coming and leaving home function * Premium interior noise damping measures * With UNECE CS&SU * 4-cylinder diesel engine, 2.0L, aggregate 03N.G * Speed control system (Cruise Control) * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Grab handle on the partition in the cargo area * Manual air conditioning "Climatic" in the cab * Halogen double headlights * LED interior lighting concept in passenger/cargo area * Traffic sign recognition * Rear view camera system with dynamic guide lines * Leather multifunction steering wheel, with Tiptronic Fedpfx Aezmlatok Uopl * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Attention and fatigue warning system * MAN SmartLink * 130 kW (LD) * Fog lights including cornering lights * MAN Connect (call services), with OCU3 low * MAN Media Van (10.4 inches) * Tire pressure monitoring system * L4 - Long * Three-point automatic seat belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V socket in the cab (in the instrument panel) * Seat "Comfort", left * Double passenger seat, right, with storage compartment * Seat belt warning, front * Seat covers in fabric "Toronto Grid" * Side paneling in the cargo area made of plastic hollow chamber panels, up to the roof frame * Side marker lights * 2 remote control keys * Approved as 3.5t * Start-stop system with brake energy recuperation * Side wind assist * Heated windshield washer nozzles, windshield washer fluid level indicator * Windshield wiper interval control with light and rain sensor * LNFZ version with up to 3 seats * Keyless Go with SAFELOCK * Sliding door, right * Lane keeping assist (Lane Assist) * Preparation for alcohol interlock * Speed limiter with predictive control * Multifunction front camera * Partition * Step lighting * Digital radio reception (DAB+) * Front axle, reinforced * Comfort telephony, without external antenna connection * Lashing eyes in the vehicle floor * Laminated windshield in heat-insulating glazing * 3.5 t * Complete N1 approval (up to and including 3.5 t GVW) * Disc brakes front, 16" * Fuel tank 75 l * Candy White Conversion service for panel van commercial vehicles possible: e.g. retrofitting trailer hitch 990.00 EUR, trailer load increase 714.00 EUR, front guard 790.00 EUR, cargo area lining from

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: F39033, KEKEISEN Universal Bed Milling Machine UBF 2000/13, machine no. F39033; well maintained, very good condition, mechanically partly overhauled in 2025 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1000 mm Fedpfx Akeykuxhs Uopl Vertical travel of the headstock (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 5000 kg Spindle power 30 kW (100%ED), max. torque 1180 Nm Spindle speed 20 - 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 10 m/min rapid traverse CNC control Heidenhain TNC 426 CA with electric handwheel HR 330 Drive system make Baumüller Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 200 litre collecting tank Tool changer for 30 tools Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 55 kVA without installation elements (fixators),

Year of construction: 1966, condition: used, machine/vehicle number: 0126, Load capacity (estimated): approx. 1.5 t Fork length: 1100 mm Adjustable fork width: 470 - 750 mm Maximum lifting height: 1000 mm Chassis: Fpsdpfobn Da Isx Ak Ujl 2 running rollers on the support arms, 1 steering roller under the lifting frame Hydraulic drive: 380 V, 1.1 kW

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. Fpedpfohnc E Aox Ak Uol This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: used, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: Fastbind Casematic H32 PRO Covermaker / Casemaker including accessories (laminator, block press) The FASTBIND Casmatic H32Pro is a professional cover maker / case maker with a folding unit for the on-demand production of individual book covers for hardcover bindings and photo books up to 330 x 330 mm. • For the production of individually printed hardcover book covers. • The desired motif simply needs to be printed on self-adhesive material or material that is subsequently self-adhesive on the back. • Of course, all known book cover materials can also be used if they are self-adhesive or have a self-adhesive finish or glue • With the help of the Hardcover Maker, the gray cardboard is inserted and covered precisely. • Thanks to numerous tools, the Casematic makes this possible semi-automatically in just a few steps • The work table is equipped with a vacuum fixation which, in addition to the light table with measuring scale, ensures exact positioning of the printed sheet • Using the optional cutting device, the printed sheet is trimmed precisely at the corners after the gray cardboard has been applied • With the folding unit, the edges are then folded around the gray cardboard without any creases, so that a cleanly manufactured hardcover in bookbinding quality is created • optional: corner cutter • optional: side stop • Max. paper size: W740 x H370 mm • max. book format: 330 x 330 x 40 mm (W x H x RB) • Max. fold length: 700 mm • Connection: 240 V / 50 Hz • Dimensions: W830 x D470 x H200 mm • Weight: 23kg We can also organize the following for you: Fpjdpfx Aou Srxbek Ujl packaging, loading, transport ( by ship or plane) including customs

Condition: new, mileage: 10 km, power: 120 kW (163.15 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,600 mm, loading space width: 2,250 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Renault Master 163 HP (by Trucks Chassis) * Diesel particulate filter * EURO 6d (green environmental badge) * Automatic climate control * Bluetooth * Light sensor * Rain sensor * 105-liter fuel tank * Extra-long exterior mirrors, electrically adjustable * Premium 3D roof spoiler and side spoilers * On-board computer * Hands-free system * Wireless charging pad * Center armrest * No side door * Start/stop function * Tire size 225/65 R16 C * Mud flaps * Diesel particulate filter (EURO 6 d-Temp/green environmental badge) * ABS, ESP, ASR * Driver airbag Fpjdpfx Aoray Aiek Usl * USB/AUX * Multifunction steering wheel * Extendable table * Tablet/smartphone holder * Power steering * Center armrest * Driver’s active seat with adjustable weight setting * Cup holder * Full-size spare wheel * Fire extinguisher * Cruise control * Exterior mirrors electrically adjustable and heated (extra-long) * Electric windows * Storage compartment under passenger double seat * Seats: fabric * Central locking with radio remote control and keyless entry * Hands-free system * Transparent roof (natural daylight) * Side lockable box * Interior lighting * Lateral underrun protection for cyclists * Lockable toolbox * Interior lighting * Reinforced front & rear axle * Long wheelbase * Side marker lights in LED * LED lights * LED lighting in cargo box / switch in cab * 10 securing points for load fixation * Box body L/W/H 4600x2250x2450 mm * Premium build * 2x slat rails (mounting height 800 mm and 1600 mm) * Air suspension available at extra cost * Rearview camera available at extra cost If the vehicle is not in stock – short delivery time possible! * Ask us about an individual leasing or financing offer * Net export possible * Delivery from €199 Didn’t find the right vehicle? Configure your own vehicle! Whether equipment, body type, or engine variant. All at a fair price! You can also purchase just the bodies for your existing vehicle from us! Don’t hesitate to contact us! * Images may show special equipment not included in the basic price. The information provided online is non-binding and for descriptive purposes. It does not represent guaranteed characteristics. The seller is not liable for typing or data transmission errors / changes / input errors. Please check the features directly on the vehicle before purchase. Subject to errors and prior sale. This ad is to be understood as an invitation to submit an offer.

Year of construction: 2007, condition: used, The MOTOMAN welding line is in good condition and has only worked about 100 working hours. Such a set is mostly used in the production of agricultural machinery – trailers, frames, axles. Made to order or assembled from standard products (except portal). Fpodpfx Aksm Uc Ige Uel The automatic welding station consists of: Station – HD Gantry HP6/EA1400N Positioner – HSB -10000SX Control unit – NX 100 Welding: Arc welding. MIG/MAG welding. Possibility of pulse cooking. The thickness of the wire used is 1 – 1.2 mm. The minimum seam height is 3mm. Maximum wire feed speed 25 m/min. Welding handle cooling function. Laser tracking: Seam search using laser sensors. It is used when changing the position of the seam. Possible deviation from the position of 5 mm. Increase in welding time by 30% and more (depending on the product). Seam fixation at min. 3mm for drop. Positioning: Positioner – HSB-10000SX The carrying capacity of the positioner is 10,000 kg The positioning accuracy of the robot arm is 0.0001 mm Dimensions of welded parts: Height/width – up to 3000 mm (including mounting hardware). Length – up to 6500 mm (including mounting equipment). Maximum weight – up to 3500 kg (limited by lifting equipment). Specifics of the parts that can be welded: Batches of high precision coupling parts. Long weld length. Large metal thicknesses min. 5 mm. Rigid product construction. When a consistent high-quality weld is required. High bending tolerance of parts. High tolerance of overall dimensions of parts. Welding inside the part – depth 110 mm. If you have more questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, functionality: fully functional, rapid traverse Y-axis: 20 m/min, spindle speed (max.): 60,000 rpm, mount diameter: 3 mm, total width: 800 mm, type of input current: AC, table length: 320 mm, table height: 560 mm, warranty duration: 12 months, working width: 560 mm, ambient temperature (min.): 18 °C, ambient temperature (max.): 30 °C, compressed air connection: 6 bar, working length: 320 mm, number of axes: 3, The compact tabletop version LOW MINI has been specifically developed for depaneling small-format production panels, small series of larger format, and cost-conscious manufacturing. PCB materials with breakout tabs can be separated quickly and economically up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive operating from above. The machine’s highlight is its easy and straightforward switch between small (320 x 280 mm) and large (320 x 560 mm) working areas. • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Panel fixation using pin technique • Flexible handling • Suitable for PCBs with breakout tabs • Milling spindle adjustment with servo-drive technology • Extraction device • User-friendly operation • Excellent price-performance ratio Manual Depaneling – flexible and cost-effective The concept of manual depaneling offers significant advantages when it comes to flexibility and cost-effectiveness. Medium production volumes can be separated quickly and with minimal dust using the LOW MINI. Standard equipment includes dual loading with linear motor technology, while single-shuttle operation is available to expand the working area. Ease of maintenance and user-friendly operation, combined with its outstanding price-performance ratio, ensure convenient operation and make investing in this depaneling machine a worthwhile choice. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool diameter: 0.8 – 2.4 mm Fedpfx Aexmfdxjk Uopl

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 1,649 h, load capacity: 2,500 kg, lifting height: 6,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Fodpfxeyyd Ufj Ak Ujpl Mast type: Triplex Technical condition: good Front tires type: superelastic Front tires condition: 60 - 80% Rear tires type: superelastic Rear tires condition: 40 - 60% Battery voltage: 80V Battery condition: 60 - 80% Description: The vehicle will be UVV inspected. Before delivery the machine receives a service and is cleaned. Repainting can be provided on request. Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 82 h, load capacity: 4,000 kg, lifting height: 3,370 mm, fuel type: electric, mast type: simplex, construction height: 2,320 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Technical condition: Very good Battery year: 2012 Fpodpeuhxk Hofx Ak Usl Description: Toyota FBMF40 M0442 Year of manufacture: 2011 Operating hours: 82 The unit is in visually very good and technically also very good condition. Charger available on request. Errors and prior sale excepted. If you have not found your forklift, please contact us. We have a large selection of other units on site. WITHOUT ATTACHMENT 3rd valve, 4th valve,

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 728 253-01, Serial No.: 39240185B – complete overhaul and testing performed professionally, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Fjdpfezhqtzox Ak Uspl

Condition: ready for operation (used), Heidenhain UVR 140D ID: 728 253-01 SN: 39240185B – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not show any mechanical damage, such as fractures, as these can no longer be repaired. In this case, an additional charge of €600 including VAT will be applied. Fjdpfxezhqt Ie Ak Uepl Attention: You are bidding on a Heidenhain inverter, model UVR 140D, ID: 728 253-01, SN: 39240185B, offered as an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €600 including VAT will be issued.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 1,210 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: solid rubber Front tire condition: 60 - 80% Rear tire type: solid rubber Fpjdpfx Asyzkt Djk Uol Rear tire condition: 40 - 60% Battery voltage: 48V Battery year: 2019 Battery condition: 60 - 80% Description: The vehicle is UVV-tested. Prior to delivery, the machine will be serviced and cleaned. Respray available on request. Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift,

Condition: refurbished (used), Year of construction: 2000, KEKEISEN Universal Bed Milling Machine UBF-R 2000/13, machine no. F42460; year 2000 well maintained, very good condition, mechanically overhauled 2023 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1200 mm Vertical travel of the headstock (Z-axis) 1300 mm Rotary table size 1260 x 1260 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 4000 kg Spindle power 30 kW (100%ED), max. torque 1200 Nm Spindle speed 20 - 4000 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 12 m/min rapid traverse CNC control Heidenhain TNC 426M with electric handwheel HR 410 Drive systems make Siemens Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 270 litre collecting tank Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 50 kVA without installation elements (fixators), without assembly and commissioning Price: on request, plus VAT Fpsdpfx Asrm Sigok Usl Pricing: ex works, delivery time: short term by agreement

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 80 mm -Max. Height: 90 mm -Price per piece -Number: 12 piece -Dimensions: 340/200/H85 mm Fjdpfxofzlvxo Ak Uepl -Weight: 18.3 kg/piece

Condition: used, machine/vehicle number: 7FBMF35-13467, Year of construction: 2008, operating hours: 12,403 h, lifting height: 4,000 mm, fuel type: electric, mast type: duplex, color: other, Year of manufacture: 2008 Empty weight: 3.548 kg Lifting capacity: 3.000 kg CE mark: yes Technical condition: average Visual appearance: average Fjdey Egk Topfx Ak Uspl Toyota 7FBMF30 Year of construction: 2008 Hours: 12403 h Battery: 80V / 600Ah Weight: 3548 kg Lifting height: 4 m Mast: Duplex Lifting capacity: 3000 kg Attachments: Sideshift, Positioners CE certified Excl. battery charger

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 880 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. This model can create half of the furnishings for the kitchen and living area. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. Wattsan M1 1325 planetary gears allow you to cut hard wood and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Fpjdpfxjrywfne Ak Usl Wattsan M1 1325 characteristics Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2080 x 3100 x 1890 mm Weight: 690 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length Fpodpfx Aksu Dnruj Uel • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Transfer: in the current condition as seen -Condition: as can be seen in the pictures (upper plate is missing) -for: machine tools and systems -Support inside: 25 mm -Price: per piece -Number: 14 pieces -Dimensions: 200/120/H63 mm -Weight: 4.8 kg Fedpfxsd N D Dhj Ak Uspl

Condition: used, Year of construction: 2001, Technical details: turning length: 300 mm x-axis: plan: 800 mm longitudinal traverse (z-axis): 300 mm control: Siemens 840D Fodpfx Aovamgxsk Uepl revolution per minute: Hauptantrieb: 20 - 5000 U/min Revolution driven tool (turret): 6000 U/min. revolution per minute: C-Achse: 0 - 100 U/min spindle bore: 79 mm Torque: Hauptantrieb: 200 Nm max. torque on the spindle: 240 Nm max. torque at clamping center: Werkzeugträger: 28 Nm m rapid motion - x-axis: 100 m/min rapid traverse Z-axis: 45 m/min tool turret - number of stations: 12 Stationen / Stations tool taper: VDI 40 Main spindle capacity: 27 / 20 kW spindle hours: 42.400 h operating hours - idle run: 93.728 h electrics - voltage/frequency: 3~ / 400V / 50Hz V/Hz interface: ja total power requirement: 50 kVA Weight approx.: 8,0 t dimension machine approx.LxWxH: 3,2 x 3,95 x 2,8 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm Application: This vertical lathe is suitable for 2-axis machining (turning, drilling; milling, Y-axis) of chucked parts. Equipment: -High-pressure coolant unit BMF for 500 liters -Make Bürener chip conveyor with oil mist separator/industrial filter ifs/ IFM 1000CTV (electrostatic extraction) -Workpiece loading and unloading device with/for 20 stations -Power chuck Ø 225mm, foot switch -Clamping surface in the work area: W: 340 x H: 430mm with 7x T-slots according to DIN 650 -Hydraulics -6x various turning tool holders and 2x various tool holders (revolving) *

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 480 mm, GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special Fsdpfxjtrk S Nj Ak Ujpl system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable. Hochleistungskreissäge, Präzisionssäge, Industriekreissäge, Starkstromsäge, Metallsäge, Präzisionsschneidemaschine, Schwerlastkreissäge, Großsäge, Industrie-Kreissäge, Kreissägeautomat, Metallkreissäge, Leistungssäge, Profi- Kreissäge, Sägeautomat, Grobschneidemaschine, Industrie-Metallsäge, Säge mit großer Leistung, Produktivitätssäge, Große Kreissäge, Schneidemaschine für industrielle Anwendungen, Schnellkreissäge, Industrie-Hochleistungssäge, Industrie-Sägemaschine, Schneidemaschine für schwere Anwendungen, Hochleistungs- Schneidemaschine, Industrie-Maschinensäge, Starkstromkreissäge, Automatische Metallsäge, Industriepräzisionssäge, Großraumsäge, High-Performance Circular Saw, Precision Saw, Industrial Circular Saw, Heavy-Duty Circular Saw, Metal Cutting Saw, Precision Cutting Machine, Heavy-Duty Cutting Saw, Industrial Saw, Power Circular Saw, Metal Circular Saw, Precision Cutting Saw, Professional Circular Saw, Automated Circular Saw, Large Circular Saw, Precision Industrial Saw, Industrial Metal Saw, High-Power Cutting Saw, Productivity Saw, Big Circular Saw, Industrial Cutting Machine, Fast Circular Saw, Heavy-Duty Industrial Saw, Industrial Saw Machine, Heavy-Duty Cutting Machine, High- Performance Cutting Machine, Industrial Machine Saw, Power Circular Saw, Automatic Metal Saw, Industrial Precision Saw, Large Capacity Circular Saw.

Condition: new, Year of construction: 2025, functionality: fully functional, DANIBRUM CAS1080 Automatic Splitting and Edging Circular Saw – Speed, Precision and Safety in Cutting The DANIBRUM CAS1080 automatic splitting and edging circular saw is the ideal solution for processing timber and brass with high efficiency. This robust and precise machine ensures straight cuts at high speed, being recommended for users who want flexibility in operation and consistent high-quality results. Essential advantages: Working flexibility for edging and splitting various types of timber; High operating speed, ideal for intensive production; Precision in cutting, with straight and clean edges; Safety in operation, thanks to anti-kickback protection systems and ergonomic control panel. Main technical features: Suspended control panel: Mobile, pivoting – provides easy access from different working positions; Intuitive interface with clear controls; Continuous electronic adjustment of the feed speed. Electric height adjustment: 0.25 kW motor for adjusting the blade holder spindle; Working height between 10 – 120 mm, displayed on the front on a graduated scale. Feed and safety system: Cast iron upper pressure bar, with independent rollers for secure fixation of the material; Anti-kickback devices, which prevent accidents during operation; Steel feed belt, driven by a 1.5 kW motor, with the blade centrally positioned. Cutting blade: Variable diameter Ø305 – 355 mm; Quick clamping system; Very good visibility of the blade; Fsdpowhbvcefx Ak Ujpl Manual height adjustment, by ergonomically positioned crank; Generous chamber for sawdust evacuation to the exhaust hood. Robust parallel ruler: Manual adjustment on cylindrical steel guide; Graduated scale and locking lever for precise settings. Centralized lubrication systems: Automatic electric pump for the feed chain; Dedicated device for guides and pressure rollers – ensures smooth operation and high durability. Additional functions: Positioning laser, for precise alignment of the material; Stroke limiters for correct positioning of the upper group; Free rollers in the work table, for quick turning of the material – height adjustable; Easy access to the cutting blade – quick and efficient maintenance. DANIBRUM CAS1080 is designed to increase the efficiency and safety of the cutting process in woodworking workshops, with an emphasis on continuous performance and intuitive operation. Ideal for professionals who need a reliable machine, easy to adjust and adaptable to various splitting and edging applications.

Condition: used, Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixers: for machine tools and systems Fpsdpfx Aefnxxbsk Uol -min. height: 85 mm -Max. Height: 95 mm -Price: per piece -Number: 12 pieces -Dimensions: 330/250/H95 mm -Weight: 28 kg/piece

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot Fjdsfdd Azepfx Ak Ujpl -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 95 mm -Dimensions: 230/180/H90 mm -Weight: 13 kg