Used Bertoja Sr 36 for sale (5,472)

Condition: new, Siemens Teleperm M 6DS1144-8AA E2 with C79458-L436-B540, unused, 100% functional, in opened original packaging Gbedpfez Acv Dox Ak Uet

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Gbodpfxez Adb Ij Ak Ujt

Condition: new, Wagner 756-EP360/60S polarity reversal unit, serial number: 603464 / 3x400V AC 50/60Hz - 360V DC 60A, unused, 100% functional, scope of delivery as shown in the photos. Gedpfx Asz Adh Ujk Usbt

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 15461, Year of construction: 2015, operating hours: 614 h, lifting height: 4,800 mm, load center: 900 mm, fuel type: electric, TECHNICAL DETAILS Load capacity: 2,500 kg (up to lift height 3,600 mm) Lift height: 4,800 mm Load center: 900 mm MACHINE DETAILS Mast type: D 45-TR Gedpfxey Ic I Ts Ak Uebt Engine type: Electric Own weight approx.: 3,180 kg Battery voltage: 48 V Operating hours: 614 h

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL Gbsdpfxsza Ucxo Ak Uet • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), Slip clutch, jaw clutch, connecting clutch, torsionally flexible clutch, shaft clutch Gbodpfxozd Szfo Ak Uot -Shaft coupling: Slip clutch -Shaft: Ø 30 x 62 mm / Hexagon 36 mm -Dimensions: Ø 210 x 180 mm -Weight: 11.6 kg

Condition: like new (used), Year of construction: 1998, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 330 mm, control type: manual, actuation type: electric, total height: 1,750 mm, total length: 2,900 mm, total width: 1,100 mm, overall weight: 900 kg, Equipment: CE marking, MEBER SR 900 band saw for cutting lumber into slats! Professional band saw designed for precise cutting of wood and large-format elements. The machine has undergone technical inspection and is in very good condition – ready for operation. The machine is in perfect condition after inspection. Gbsdpfx Aoy Uc H Nsk Uet TECHNICAL SPECIFICATIONS: - Maximum cutting height: 460 mm - Cutting height with feed: 240 mm - Maximum cutting width: 680 mm - Cutting width with feed: 130 mm - Maximum element width: 330 mm - Maximum band width: 80 mm - Table height from the base: 1000 mm - Table dimensions: 970 × 810 mm - Table adjustable at an angle: yes - Band guidance: double-sided - Feed speeds (10 ranges): 2.5 / 4 / 5 / 7 / 8 / 12 / 14 / 19 / 24 / 38 m/min Motor power: 5.5 kW Machine dimensions: - Length: 2900 mm - Width: 1100 mm - Height: 1750 mm - Weight: 900 kg Robust and efficient band saw for carpentry and production applications. Thanks to its large cutting height and width, it enables the processing of massive elements. The adjustable table and wide range of feed speeds allow you to adjust the operating parameters to different types of wood and production requirements. Double-sided band guidance ensures high precision and cutting stability. Tel: 664 335 465 Tel: 530 632 386 jbsmaszyny.pl

Year of construction: 2005, operating hours: 900 h, condition: ready for operation (used), functionality: fully functional, GMM Sawing Machine - Lexta 36 (4 axes) Versatile bridge saw for marble, granite, and stone, offering high precision and user-friendly operation. Specifications: - 4 axes - Table: 3540x1850 mm - Blade: 800 mm diameter - Reliable and easy-to-use machine Gedpfx Asx A A Nwsk Ujbt

Year of construction: 1984, condition: excellent (used), Frame saw with 600 stroke Gbsdofym Edopfx Ak Uot width 950 mm height 915 mm power 132 KW

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, Gbedpfxsgwct De Ak Ust • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V Gbodpfx Aketv Ihqj Uet frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Gbsdpfxorfclqs Ak Ujt Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Year of construction: 2005, condition: good (used), robot handling device Sepro SR 4010 S3 DB x=400 mm y vert. =1000mm Z=1600 mm (+C) R1 year: 2005 price: 6.900 Euro Gedsphnztspfx Ak Uebt contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Year of manufacture: 2001 on plate EDIGRAPH S.A. Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good Gedpfx Aksubztke Uebt

Condition: excellent (used), STAR SR-20R sliding headstock automatic lathe TECHNICAL DATA Gsdpfxou Hkh Ro Ak Usbt Spindle diameter: 20 mm turning length: 205 mm Speed range - spindle: 500 - 12,000 rpm Drive power, spindle motor: 2.2 / 3.7 kW Travel X: 265 mm Speed range, counter spindle: 500 - 8000 rpm Drive power, counter spindle motor: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: Linear tool holder, front attachment, rear machining SCOPE OF OFFER U.A: (list not exhaustive): STAR SR-20R sliding headstock automatic lathe LNS bar loader transformer Coolant tray Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: used, Year of construction: 2020, carrying capacity 500 kg weight 930 kg Gjdpfsvg R U Tjx Ak Uobt dimensions 1250 x 2590 x 1500 mm Operating instructions available technical data see attached PDF

Condition: used, Technical details: diameter: 300 mm width: 165 mm weight of the machine approx.: 88 kg EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar Gbsdpfx Akou Nlihe Uet *

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Gbodjlbgfcjpfx Ak Ust Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: new, The durable planer from the SR series is a machine thanks to which we can adjust the thickness workpiece from the bottom side, the maximum workpiece width is 330/430/530 mm. The high-performance 4 kW motor and the cutting block with four blades ensure high performance quality work and obtaining perfectly straight surfaces. Technical data: Planing width: 530 mm Knife shaft diameter: 120 mm Number of knives: 4 Knife shaft speed: 4700 rpm Tilting guide: 0-45° Total length of the table: 2700 mm Max thickness of the workpiece: 5 mm Extraction port diameter: 150 mm Motor power: 4 kW Engine speed: 2880 rpm NEW machine Gbjdpfxolqwwhe Ak Uet Overall dimensions: Length: 2760mm Width: 920mm Height: 1130mm

Condition: used, machine/vehicle number: 13348, empty load weight: 11,600 kg, maximum load weight: 35,900 kg, overall weight: 47,500 kg, axle configuration: 3 axles, first registration: 06/1982, tire size: 9,5 r17,5 zwilling, Additional information: 1st axle fixed, 2nd and 3rd axles hydraulically steered with a forced steering mechanism and swivel wedge, 1 pair of hydraulic support legs incl. hand pump for emergency operation, leaf spring suspension, 6 storage compartments, complete steel diamond plate flooring, air connections: red-yellow + electrical connections: 1x 7-pin. Length of gooseneck: approx. 4,380 mm Length of low-bed: approx. 11,300 mm Gbodpji Riyzefx Ak Uet Saddle height: approx. 1,200 mm

Condition: used, Injector Inject Star Godpfekqyhnsx Ak Uobt Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, top plate 355 x 250 mm, outer diameter of drain outlet 59 mm, used, in good condition, 100% functional. Gjdpfx Aji D N Nhsk Uebt

Condition: used, Year of construction: 1993, 1 used column drilling machine Brand: Alzmetall Model: AB 36 Year of manufacture: 1993 Spindle taper: MK 4 Drilling capacity in steel St 60: 34 mm Drilling capacity in cast iron GG 20: 40 mm Max drilling capacity in St 60: 40 mm Thread cutting in ST 60: M 24 Thread cutting in GG 20: M 30 Reach: 330 mm Column diameter: 145 mm Spindle stroke: 160 mm Gbodpfx Asy H Dfwjk Ujt with automatic drilling feed Total power requirement: 1.3 kW Machine height: 1865 mm Weight approx. 470 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 633 h, Equipment: soot filter, Kaeser M 36 G compressor, manufactured in 2014, with 633 operating hours, a flow rate of 3.9 m³, 4-cylinder water-cooled Kubota engine, 36.5 kW, tool lubricator, serial number WKA0F1200E5127176, truck coupling, car coupling, operating permit available, particulate filter, emergency power supply 13 kVA, connections: 3 x 230V, 1 x 400V, flexible hose defective. Gbjdpfx Aezbig Ijk Uot

Condition: used, Year of construction: 2022, x-travel 5.230 mm y-travel 2.750 mm z-travel 1.100 mm control Heidenhain TNC 640 Tool bore DIN69871 A50 BIG PLUS main drive 32/43 kW torque S1/S6-60% 752/1.011 Nm speeds Spindel stufenlos 6.000 U/min ca. 70 kw weight of the machine ca. ca. 43 t Installation dimensions (length x width x height) ca. 12,2 x 5,7 x 5,1 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Heidenhain TNC640 control system with HR510 handwheel and digital drives - 60-station tool changer - Internal coolant supply (ICS) for vertical spindle with 1000L tank and automatic water/air switching - Direct axis measurement via Heidenhain linear scales - Coolant system with paper belt filter and magnetic separator - Automatic central lubrication - Rigid tapping (threading without compensating holder) - Oil-cooled ball screw (internal) in the X-axis - Spindle oil cooler - Automatic machine shut-off - Screw-type chip conveyors on both sides of the table - Hinged-belt cross chip conveyor Accessories, pictured tools, and workholding devices are included in the scope of delivery only if specified in the additional information. Gbsdpfx Aozgxgmsk Ujt Subject to change, errors in technical data/specifications, and prior sale.