Used Berkmann 3102 Ww for sale (110)

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB Iiedpfjy Spl Hsx Aa Ejd + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Iiodpfxon Uv S Aj Aa Eod Type: KR30L16-2 (SafeRobot) Year of manufacture: 2011 Reach: 3102 mm Weight: 700 kg Payload: 16 kg Kuka controller KRC2ed05 (SafeRobot) Weight: 185 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka teach pendant KCP2 Kuka connection cables 7m / 15m 24626

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Iedpfxsv Rpnme Aa Eoid Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Iijdpfx Aezaf H Iea Ejd Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: good (used), Year of construction: 2008, Urban PF 3000 / machining center in portal design, Year of construction 2008, Heidenhain iTNC 530 control system, travel X/Y/Z 3210/695/585 mm, Machining center in portal design, Drilling capacity in ST 60 Ø 18 mm, M 16, Spindle speed up to 8,000 rpm, SK 40, Ww 12 times, Table size 3,000 x 700 mm, chip tray, coolant system, electric handwheel, Ijdpfx Aeu Tptcea Ejid tool length measuring device,

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also prints in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Volume For large objects with a high clearance height. Print head: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer control and image editing. Isdpfx Aaofvx U Hs Esid Weight: 90 kg Control display Table movement via screw mechanism 360-degree operation available upon request: for large, round bottles or other objects A2 size 45x65cm and 40cm printing height Printer dimensions: 107x106x102cm Water circulation cooling system Software settings and printer explanations are available upon request. Available throughout Germany and Europe.

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Iiedpsx Ap Hpofx Aa Eod Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,982 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-Curable Inks. High-performance production machine for printing on a variety of materials with UV-curable inks. Ideal for printing on sheet and board materials such as aluminum composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, and cut-to-size films. Even challenging materials, such as those sensitive to heat, can be printed without issue due to the stepless adjustability of the UV lamps, preventing excessive heating. The integrated, retractable positioning marks allow for precise and easy placement of print media, enabling accurate series production. The printer features precise print control, ensuring very high accuracy for multiple print passes (e.g. 2.5D, relief, or Braille printing). Technical Data: - 3 Ricoh GEN-5 print heads - Print resolution up to 1200x1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Steplessly adjustable lamp intensity - Print area approx. 2500 x 1200 mm - Maximum material thickness: 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum system with 4 controllable vacuum zones - Ink system with 1-liter bottles - No chip required for recognition (open system) - Connection: 32A – 380 Volt Iijdpfeyc Nt Djx Aa Esd - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The unit is operational and can be viewed at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be provided upon request for an additional charge (not included in the price). Year of manufacture 2019 – Completely overhauled in 2025* *All ink-carrying parts such as ink hoses, filters, pumps, etc. replaced. Print heads are used but in perfect working condition (see nozzle check printout). All relevant drive components checked and adjusted. Price: €21,900 without RIP software €23,900 with current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,590 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-curable inks. High-performance production machine for printing on a wide range of materials using UV-curable inks. Ideal for printing on boards and sheet materials such as aluminium composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, as well as cut-to-size films. Even challenging substrates, such as heat-sensitive materials, can be printed with ease thanks to the stepless adjustment of the UV lamps, preventing excessive heat build-up. Integrated, retractable registration pins enable precise and effortless positioning of print media, making accurate series production possible. The printer features highly accurate print control, ensuring excellent repeatability when printing multiple passes (e.g., for 2.5D, relief effects or Braille lettering). Technical data: - 3 Ricoh GEN-5 printheads - Print resolution up to 1200 x 1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Lamp intensity continuously adjustable - Print area approx. 2500 x 1200 mm - Maximum material thickness 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum table with 4 independently adjustable vacuum zones - Ink system with 1-litre bottles - No chip recognition required (open system) - Power connection: 32A – 380 volts - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The machine is operational and can be inspected at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be offered for an additional charge (not included in the price). Year of manufacture: 2018 – Refurbished 2025* *All ink-carrying components such as ink tubes, filters, pumps, etc. have been replaced. Printheads are used but in flawless condition (see nozzle test printout). All relevant drive components checked and calibrated. €18,900 excluding RIP software €20,900 including current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition. Iedpfx Aasyc Nt Rs Ejid

Year of construction: 2011, condition: good (used), Plant: PEMO pump, sludge pump, chamber filter press feeding pump Type: S-ATMAO/AB/DCB75 Series: AO/AB Year of construction: 2011 HP: 22/50 Engine: Cantoni Iodpfx Asi Ezhbja Eoid Power: 37kW Speed: 2951 rpm Machine number: 3102 Dimensions: L 1200mm Application: Designed for very abrasive and/or acidic slurry applications. Delivery volume: from 1 to 1500 m3/h / depending on the medium