Used Apv W+60/300 for sale (52,755)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water Tjdsy Samuopfx Amyja - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Year of construction: 2004, Item: DP-18231-Pump-APV-W80-80-240 Todpfstk Hyksx Amyoa Brand: APV-SPX Type: W+80/80 240 Brand: APV-SPX Serial number: 3013986 Year: 2004

Condition: good (used), Homogenizer APV Rannie BLP 63.60 Manufacturer: APV Homogenisers AS Model: Rannie BLP 63.60 Machine type: Homogenizer Serial number: 1.97.187 Year of manufacture: 1997 Max. pressure: 70 bar Available quantity: 4 Previously used in margarine production. 3-piston process pump - for highly viscous food products - featuring: relatively high throughput, moderate pressure, hygienic design Well suited for: - Margarine / Butter / Spreads Tedpfx Aeyxvp Ssmyoa - Creams / Pastes - Chocolate (conditionally) - Viscous emulsions

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Tsdsuqdwxepfx Amyoa Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Todorfucfopfx Amyja Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Cheese Vat, Open Type, Stainless Steel, 6,000 L capacity. Complete stainless steel vat with agitation equipment. Insulated. Very good working condition, last used two months ago. Tedpfx Amex R U Htoyea

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, We are selling this lathe, fully functional. A video of the machine can be sent via WhatsApp. CNC Sinumerik 840D. Todpfsyl Swksx Amyea

Year of construction: 2017, condition: ready for operation (used), Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible. Tsdpsyv H Exsfx Amysa

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Tedpfx Amjxbfuteyea

Condition: used, Year of construction: 1999, functionality: fully functional, Item: AV2262-Vertical-3,000L Vertical stainless steel process tanks – APV 5 units. External dimensions: Dia Ø 1250 mm, Total height 3700 mm Agitator from top Capacity 3,000 L / each Double jacket Manhole at the top. Tsdpfx Amewm Ntgoysa 3 legs AISI 304.

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Tsdpfswcl Ufjx Amyja Working range laser: 6000 x 2500 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 5500 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 16300 mm Width: 4150 mm Height: 2620 mm Machine weight: 25800 kg

Year of construction: 2016, condition: as good as new (ex-display), functionality: fully functional, Friction washer Todpfx Aebxadlomyja Manufacturer: Neue Herbold Drive: 22 kW for cleaning of regrind, especially film flakes, PET- bottles flakes and other hard plastic materials.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Todpfx Amswwqvwoyoa

Condition: new, empty load weight: 745 kg, maximum load weight: 1,855 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,660 mm, working width: 1,920 mm, E-hydraulics / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW2.4 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 300 x 180 x 35 cm - External dimensions (L x W x H): 437 x 192 x 166 cm - Loading height of floor: 72 cm - Gross vehicle weight: 2,600 kg - Unladen weight: 745 kg - Payload: 1.855 kg - Chassis: High loader (wheels under the body) - Tyres: 165R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Aluminum anodized double-walled - Drop side height: Double-walled double-walled - Side wall height: 35 cm - Side walls foldable: 4-sided - Side walls removable: 4-sided - Side wall hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locksNo - Number of pallet spaces: 4 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 4-stage - Tipping angle (R/S): 45 - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: Plastic mudguards - Superstructures/attachments: Optional, attachable - Ramp shaft: Yes - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminium drop sides double-walled - Drop sides can be folded to the side and rear - Drop sides removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocho Tsdpfxsu Hr H Uo Amysa

Condition: new, empty load weight: 825 kg, maximum load weight: 1,775 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 950 mm, loading space volume: 5.4 m³, color: silver, construction height: 1,660 mm, working width: 1,920 mm, E-hydraulics / ramp shaft / grid attachment 60cm, automatic reverse drive, hot-dip galvanizing, roof window, loose, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / ramp shaft / grid attachment 60cm, loose TECHNICAL DATA - Make: Debon - Model: PW2.4 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 300 x 180 x 95 cm - External dimensions (L x W x H): 437 x 192 x 166 cm - Loading height of floor: 72 cm - Gross vehicle weight: 2,600 kg - Unladen weight: 825 kg - Payload: 1.775 kg - Chassis: High loader (wheels under the body) - Tyres: 165R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Anodized aluminium, double-walled - Drop side height: Double-walled double-walled - Dropside height: 35 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locks - Swing tailgate: No - Number of pallet spaces: 4 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 4-stage - Tipping angle (R/S): 45 - Overrun device/brake: KNOTT - Superstructures/attachments: Grid attachment - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: Plastic mudguards - Attachments/attachments: Optional, attachable - Ramp shaft: Yes - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminium drop sides double-walled - Drop sides can be folded to the side and rear - Drop sides removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcha Tsdpfou Hr Ixsx Amyja

Condition: ready for operation (used), operating hours: 46,652 h, functionality: fully functional, machine/vehicle number: 661227, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, power: 5.5 kW (7.48 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tedpfx Amezpxfbjyja Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Spindle speed range: 40 – 4,000 rpm Spindle connection: ISO 40 Table surface area: 900 x 480 mm MACHINE DETAILS Spindle power: 5.5 kW Operating hours: 46,652 h Machine weight: 2,900 kg EQUIPMENT Digital position display Millplus CNC

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side Tjdsif Az Uspfx Amyea - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB6700-300/2.7 IRC5, load capacity: 300 kg, arm reach: 2,700 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Excellent basic condition. This robot will be professionally cleaned but not repainted. Brand: ABB Type: IRB6700-300/2.7 Controller: IRC5 Payload: 300 kg Reach: 2.7 m Comes with an ABB Lean ID (see document): The IRB 6700 LeanID ensures flexible operation and minimizes downtime (due to cable wear), providing better process efficiency and reducing manual handling. In short, IRB 6700 LeanID delivers a strong return on investment. Optional: We can deliver the robot with an ABB IRBTx004 track (up to 32 meters if needed). Complete with the 7th axis drive unit installed in the robot controller, motor, cable chain, grease pump, fully functional and operational. About: Our daily, reliable business is the delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Tjdpfewqqtvsx Amysa Established in 2002. We ship worldwide.

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numrotoplus software Numroto software for simple milling cutters and cords, Numroto software for simple and complex drills Tjdpfx Ajyv Hv Rsmyea Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Rotor width: 600 mm Tsdpfsyr Tnwex Amysa 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Tsdsyr Tkxspfx Amyea Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. Todpsza U Nfefx Amyea - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (customer has also processed 0.4 mm) Maximum sheet thickness: 3 mm Number of upper straightening rollers: 3 Todpfx Aozphauemyea Number of lower straightening rollers: 3 Diameter of straightening rollers: 70 mm Total power consumption: 1.4 kW Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-95-7986, Used HPP 300/43/43 panel saw, refurbished PERMANENTLY INTEGRATED FEATURES: • Saw blade overhang 80 mm • Cutting length 4300 mm • Right-hand machine • Machine table in the cutting line with air cushion table • 4 tables • Smooth control of the clamping beam • 7 clamps • Main saw motor power: 11 KW • Scoring saw motor power: 1.5 KW • Labeling software • Saw carriage speed 130 m/min • ECO Plus technology allowing up to 20% energy saving MACHINE OPERATION: • Operating panel • CADMATIC 5 ADDITIONAL INFORMATION: • Data transfer via WLAN + USB • Label printer • Power Concept DOCUMENTATION: • Available languages: German, English • Format: Data carrier + paper documentation GENERAL INFORMATION: • POWERCONTROL control with POWERTOUCH system • CE marking: YES • Operating condition: undergoing overhaul, ready for demonstration: September 2026 ----- HPP 300/43/43 panel saw Tsdpfey A Rgaox Amyea Machine operation: * Saw blade overhang 80 mm * Cutting length 4,300 mm * Right-hand design * Machine table in the cutting line with air cushion table * 4 tables * Stepless clamping beam control * 7 clamps * Main saw motor power: 11 kW * Scoring saw motor power: 1.5 kW * Labeling software * Speed of the saw carriage: 130 m/min * ECO-Plus technology for saving up to 20% energy consumption Machine operation: * Control panel * CADMATIC 5 Additional information: * Data transfer via WLAN + USB * Label printer * Power Concept Documentation: * Available languages: German, English * Format: Data carrier + paper documentation General information: * POWERCONTROL control with POWERTOUCH system * CE marking: Yes * Operating condition: General overhaul in progress, ready for demonstration from September 2026 Transport, assembly and training by the seller.

Condition: good (used), mileage: 42,019 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,200 mm, first registration: 04/2024, loading space length: 480 mm, loading space width: 1,420 mm, loading space height: 1,280 mm, color: blue, driver cabin: day cab, tire size: 245/50R18, number of seats: 7, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, parking heater, seat heater, traction control, = Additional Options and Accessories = - Bluetooth - Electric windows - Electric mirrors - Tinted windows - LED lamp - Alloy wheels - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Standard - Blind spot sensor = Notes = Todpfxjzpd Rpe Amyoa Configuration: 4x2, Unladen weight: 2892 kg, Gross vehicle weight: 3500 kg, Alloy wheels, Cruise control, Air conditioning, Number of airbags: 6, Auxiliary heating, Rear window wiper, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Blue, Metallic, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 150 kW (201 Hp), Fuel: electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Side paneling, Roof rack: Standard, Side doors: 2, Side windows: 4, Rear closure: Tail lift, Central locking, Seats: 7, Seat arrangement: 2+2+3, Seat covering: Leather, Seat adjustment: Manual, WLTP 365 km, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 2 License plate: KLEYN1 Axle configuration Tire size: 245/50R18 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 6 mm Dimensions Dimensions (L x W x H): 514 x 193 x 197 cm Weights Unladen weight: 2,892 kg Payload: 608 kg GVW: 3,500 kg Functional Loading area height: 50 cm Interior Upholstery: Leather Maintenance APK (Periodic Vehicle Inspection): valid until 04/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 754 € per month (delivery van, 72 months); Please inquire for further information and conditions.