Used Amada Tp-60 for sale (22,446)

Year of construction: 2025, condition: new, Transport trailer Payload: 6000 kg Length: 4000 mm Width: 1600 mm Height: 540 mm Turntable steering Fixed trailing axle Wooden floor: 27 mm Reinforced band tires 415 x 100 with steel rims Paint finish: RAL 2000 Drawbar with 40 mm eye and safety lock Todpfx Aehwna Ajmyea

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Tjdpfx Aewc Afhomysa Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, functionality: fully functional, Year of construction: 2010, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 4,000 mm, sheet thickness steel (max.): 8 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 11,530 kg, Opportunity to purchase a high-quality AMADA GX II 840 hydraulic guillotine shear in very good condition. Tsdpozh T E Hofx Amysa This machine is designed for accurate, reliable, and efficient cutting of sheet metal and offers excellent rigidity, high precision, and user-friendly operation. The GX II series from AMADA is known for its robust construction, high safety standards, and ease of operation, making this machine ideally suited for industrial production environments. The machine is available immediately and can be inspected and tested in working order by appointment.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,429 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 3,500 W, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, overall weight: 7,700 kg, total width: 5,745 mm, total height: 2,271 mm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details. • Control: AMNC 3i • Controlled axes: X, Y, Z (three axes controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with one reposition) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatable positioning accuracy: ±0.01 mm Todpfx Amozh Hydoysa • Maximum workpiece weight: 330 kg • Processing surface height: 820 mm • Work chute size: 550 × 1,750 mm • Laser resonator: AF3500i-C • Laser type: Fast axial flow, high-frequency discharge excitation CO₂ laser • Wavelength: 10.6 µm • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm Additional equipment • MP300 Automatic Sheet Loading System

Condition: good (used), mileage: 7,066 km, power: 85 kW (115.57 HP), first registration: 12/2024, fuel type: electric, tire size: 225/55R17, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, total length: 5,140 mm, total width: 1,930 mm, total height: 1,910 mm, loading space length: 2,470 mm, loading space width: 1,640 mm, loading space height: 1,350 mm, Year of construction: 2024, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = Tsdszh Ehaspfx Amyja - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Partition = Notes = Configuration: 4x2, Unladen weight: 2395 kg, Gross vehicle weight: 3200 kg, Cab type: Single cab, Air conditioning, Number of airbags: 2, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 85 kW (114 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Leather, Seat adjustment: Manual, L2 280KM WLTP 60kWh Camera CarPlay Automatic Rear doors 3-seater/Empty PDC Seat heating New!, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,395 kg Payload: 805 kg GVW: 3,200 kg Functional Loading area height: 57 cm Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 413 € per month (delivery van, 72 months); Please inquire for more information and conditions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 11,028 h, load capacity: 5,000 kg, lifting height: 6,300 mm, free lift: 1,800 mm, load center: 700 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 1,300 mm, fork length: 1,600 mm, fork width: 180 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 250-15, rear tire type: pneumatic tires (air-filled), rear tire size: 250-15, overall weight: 13,750 kg, empty load weight: 5,000 kg, total height: 2,600 mm, total length: 4,400 mm, total width: 2,400 mm, color: grey, Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, sideshift, SIDELOADER FORKLIFT – HUBTEX S50D – 2008 | 11,028 MTH | DIESEL | TRIPLEX 6300 mm | Platform 1600 mm 🚀 Ready to work from day one – no investment, no risk 🔍 Why this machine? Looking for equipment that won’t interrupt your workflow? This HUBTEX S50D is a proven solution after a full technical service—get in and start working. No hidden costs. ✔ Fully serviced (oil and filter change, complete inspection of all assemblies) ✔ Technical and visual condition: as new ✨ ✔ Only 11,028 operating hours – truly low mileage ✔ New tires – no further investment needed ⚙️ Key Specifications Capacity: 5,000 kg Drive: Diesel ⛽ Mast: Triplex – 6,300 mm lift Fork positioner: 1,300 mm Fork length: 1,600 mm Cabin: Full / heated 🔥 Platform: 1,600 mm 📊 Full technical specification General Data: - Year of manufacture: 2008 - Operating hours: 11,028 MTH - Load capacity: 5,000 kg - Load center: 700 mm - Machine weight: 8,750 kg Mast and Lifting: - Mast type: Triplex - Lift height: 6,300 mm Forks and Attachments: - Fork positioner: 1,300 mm - Forks: 1,600 mm Dimensions: - Height: 2,600 mm - Length: 4,400 mm - Width: 2,400 mm - Total height: 2,950 mm Running Gear: - Tires: pneumatic (100%) – new - Front: 250-15 - Rear: 250-15 🧰 Equipment ✔ Full heated cabin ✔ Fork positioner ✔ Adjustable right fork height ✔ Truck leveling system 🟢 Condition Technical: 5/5 – fully serviced Visual: refurbished, as new, corrosion-free 🏭 Ideal for: ✔ Narrow aisle storage ✔ Timber, steel, and pipe industries ✔ Handling of long loads ✔ Indoor and outdoor use 💼 What you get You are not buying a "used forklift." This is a fully inspected, work-ready machine: ✔ Each unit is thoroughly tested before sale ✔ Ready for immediate deployment ✔ Live video demo available 🎥 Tjdjzk Tumjpfx Amyja ✔ Delivery direct to your site 🚛 Delivery and Support ✔ Pan-European transport ✔ Complete logistics service ✔ Leasing/financing support ✔ After-sales support 🏆 Why FT LOGISTICS? We supply machines that work – not ones waiting for repair. ✔ 100+ machines in stock ✔ In-house service and preparation ✔ Pan-European experience ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality We Stand Behind. Service You Can Trust.

Condition: used, Amada Chip Conveyor Condition: Used, inspected, and ready for operation Technical Data Scraper Conveyor Infeed width: 720 mm Infeed length: 1,850 mm Infeed height: 390 mm Discharge height: 450 mm Tjdpfx Aezhuucomysa Dimensions: 3200 x 1000 x 1000 mm Weight: approx. 470 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,207 h, load capacity: 14,000 kg, lifting height: 3,600 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,000 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 400/60-15, rear tire type: superelastic tires (black), rear tire size: 465/55-20, overall weight: 30,000 kg, empty load weight: 16,000 kg, total height: 2,950 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are experts in the field! 🔧 We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! In this listing, we present: 🔥 COMBILIFT C14000 – DUPLEX 3600mm – Year: 2019 – 4207 HOURS – GAS – FREE LIFT – POSITIONER – 1500MM FORKS – Condition: 5/5 🔥 The forklift is in excellent technical condition, fully inspected and ready for immediate operation. 🛠️💨 🔍 Key Features and Technical Data: Model: COMBILIFT C14000 Year of Manufacture: 06/2019 Tedpozk E Avefx Amyea Load Capacity: 14,000 kg Operating Hours: 4207 h Mast Type: Duplex Lift Height: 3600 mm Drive Type: GAS Load Center: 600 mm Engine Manufacturer: G.M. Total Weight: 16,000 kg Tyres: Solid, superelastic, in very good condition Front Tyres: Superelastic – 400/60-15 – 100% TREAD Rear Tyre: Superelastic – 465/55-20 – 100% TREAD Overall Height (mast lowered): 3150 mm Fork Length: 1500 mm Free Lift Height: 1750 mm Overall Height (structure): 2950 mm Overall Length: 3000 mm Overall Width: 3300 mm Positioner Width: 2000 mm Technical Condition: Fault-free, after full service Visual Condition: Very good ✅ 📞 Contact us today and get a powerful machine that will work hard for your business!

Condition: used, Year of construction: 2009, operating hours: 51,040 h, functionality: fully functional, overall weight: 12,400 kg, total length: 2,650 mm, total height: 3,150 mm, total width: 4,550 mm, stroke length: 350 mm, type of input current: three-phase, pressing force: 170 t, input voltage: 400 V, We are offering this used Amada HFP NT 170-3L bending machine, manufactured in 2009. Maximum pressing force: 1700 kN Maximum stroke: 350 mm Weight: 12400 kg Sound pressure level: 75 dB(A) Voltage: 400/415 V Frequency: 50 Hz Number of phases: 3 Installed power: 16.5 kW Todpfx Ajzk Dinsmyoa Rated current: 28.6 A Date of manufacture: 03/2009 Serial number: HFP NT 170-3L B090020 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW Todpfsx D Hpqsx Amysa • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller -Saw band roll: made from metal saw Amada HA-400 W Tedpfx Ajgal Avemyea -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm Todpfogag Ahex Amyja -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Condition: good (used), functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,250 mm, Siemens Sinumerik 840D control system Tsdpfjzkt A Dox Amyja Distance between centers: 2000 mm Turning diameter above the bed: 1200 mm Bore diameter: 110 mm Chip conveyor Year of manufacture: 1998 Automatic tool changer with 4 positions 2 x fixed centers 1 x traveling center 3-jaw chuck, 500 mm Optional: can be discussed for a 4-jaw chuck, 1000 mm Various accessories Total power: 40 kW Dimensions (length x width x height): 5800 x 2450 x 2250 mm

Condition: used, Year of construction: 2010, 2 x Amada Astro HDS 1030/NTR press brakes, year of manufacture 2010, and Amada Astro III press brake, year of manufacture 2013. Tsdpfx Amsy Em Ulsyja

Condition: new, mileage: 1 km, power: 169 kW (229.78 HP), fuel type: diesel, tire size: 245/70R17,5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, permissible axle load (axle 1): 4,500 kg, permissible axle load (axle 2): 8,500 kg, loading space length: 7,580 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2026, Equipment: tail-lift, Technical Information Number of cylinders: 4 Engine displacement: 6,700 cc GVWR: 11,990 kg Transmission Transmission: ZF Powerline, 8 gears, automatic Axle Configuration Tire size: 245/70R17.5 Brakes: Disc brakes Front axle: Max. axle load: 4500 kg; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Parabolic spring suspension Todpoyhntasfx Amyea Rear axle: Max. axle load: 8500 kg; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Air suspension Functional Tail lift: DHollandia DH-LM 2.0, tailgate, 2000 kg Body manufacturer: Veekemans Plywood Condition Overall condition: very good Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: None

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW Tjdpjum R T Sofx Amyoa - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Tsdpfx Aozkldysmyea

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: N000615, functionality: fully functional, operating hours: 4,626 h, power: 14.8 kW (20.12 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 180 mm, table length: 3,220 mm, table height: 960 mm, throat depth: 420 mm, oil tank capacity: 295 l, total length: 4,360 mm, total width: 2,660 mm, total height: 3,050 mm, overall weight: 15,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, See above. Tedpfxozkhvls Amyea If you have any further questions or require additional details, please contact us directly.

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Todszkgf Eopfx Amyoa

Condition: refurbished (used), For Sale: EOS P760 – Guaranteed Working Condition This EOS P760 has been fully cleaned and revised by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Coherent C70 lasers like on the P770, this high-performance machine is designed for demanding SLS production environments. With this P760, you can expect print quality similar to that of the P770. The p770 prints faster however. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station Todpfx Amev Dxw Deyea • Transitube • IPCM P • Unpacking station • Build frames Materials! We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, helping you reduce production expenses without compromising on quality. Services Included: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables like our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for dependable machines, premium materials, and the expertise to maximize your SLS production. Contact us today for more information or specific inquiries!

Condition: repair required (used), functionality: limited functionality, Year of construction: 2007, operating hours: 31,489 h, control type: NC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 22,804 h, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, AMADA LC3015 X1 NT – Complete Automated Laser Cutting Cell -The AMADA LC3015 X1 NT is a fully automated CNC laser cutting cell designed for efficient, high-volume sheet metal production with minimal operator intervention. -The installation includes the AMADA LC3015 X1 NT laser machine, an AS LUL 300 X1 automated tower system, a 4 kW Mitsubishi ML40CFX CO₂ resonator, a Riedel industrial chiller, and a Donaldson Torit extraction and filtration system. -Manufactured in Japan in 2007, the machine offers a working area of 3,000 × 1,500 mm and delivers reliable, precision laser cutting performance. -The 4 kW laser is capable of cutting mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. -The automated tower system features eight storage cassettes with a load capacity of 3,000 kg each, enabling automatic material loading, unloading, and pallet exchange for continuous production. -A vacuum sheet handling system further improves productivity by reducing manual material handling. -The Riedel dual-circuit chiller provides efficient cooling for both the laser source and optical components, ensuring stable operation. -The Donaldson Torit filtration system effectively removes fumes and metal particles generated during the cutting process, maintaining a clean and safe working environment. -This complete AMADA/Mitsubishi solution combines automation, reliability, productivity, and integrated cooling and filtration systems, making it an excellent choice for demanding industrial manufacturing applications. Tedpezi Uc Nefx Amysa

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW Tsdpevxwytefx Amysa weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: ready for operation (used), Year of construction: 1998, controller manufacturer: FANUC, punching force: 31 t, sheet thickness (max.): 3 mm, overall weight: 16,000 kg, total width: 6,500 mm, total height: 3,050 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,270 mm, product length (max.): 8,300 mm, number of axes: 2, CNC punch press manufactured in 1998. This AMADA Vipros 358 King features a maximum workpiece length of 4,000 mm and a maximum workpiece width of 1,270 mm. It offers a punching force of 300 kN and a maximum stroke of 40 mm. If you are looking to get high-quality punching capabilities, consider the AMADA Vipros 358 King machine we have for sale. Contact us for further details. Tsdpfxozg D Ato Amyja - Max. Workpiece Length: 4,000 mm- Max. Workpiece Width: 1,270 mm- sheet thickness: 3.2 mm- Max. Punching Force: 300 kN- Max. Stroke: 40 mm- Max. Feed Rate: 80 m/min- Infinitely Variable Feed Rate: Yes- Control Unit: FANUC- Declaration of Conformity: Yes- Conformity Marking: CE Mark

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Tsdeziviwspfx Amyoa

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 210 mm * From above: - Pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * From below: - Adjustable rollers in the lower bed, 2 pcs Tedpfx Aey T Rfwomyea - Motor: 4.4 kW - 2 types of feed speeds - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - Made in Germany - Used thickness planer, very good condition Net price: 12,900 PLN Net price: 3,071 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (The price may change in the event of significant exchange rate fluctuations)