Used 3-Roll Round Bending Machine for sale (105,024)

Condition: new, sheet width 1070 mm plate thickness 9.0 / 10,0 mm distance between columns 1070 mm diameter of upper rolls 190 mm pre-bending capacity 9,0 mm connected load 5,3 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) Isdpew In A Ijfx Anzoig - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty. Iisdpfjyzc Iaex Anzog

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Isdozbcwmjpfx Anzsig Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm voltage 400 V total power requirement 150 HP Iijdpfx Ansyuql Sozjg weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm Iisdpfxezwuu Us Anzsg ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request Iiodpexuf Slsfx Anzog - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Iodpfxsxghngo Anzeig Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller Iedpfxevx Uvxj Anzeig stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: new, sheet width 1070 mm plate thickness 3,0 mm Iisdshfhzvopfx Anzsg distance between columns 1100 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 420 Kg dimensions of the machine ca. 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V

Condition: new, Special offer price for in-stock items. Only while supplies last. Price ex works, plus VAT. Round bending machine HRM 610, Bernardo Roller length: 610 mm Max. sheet metal thickness (400 N/mm2): 2.0 mm Roller diameter: 60 mm Length: 1200 mm Depth: 550 mm Height: 1030 mm Weight approx.: 166 kg Features: - Top roller with horizontal insertion groove for producing tight radii - Convenient pre-bending thanks to asymmetrical roller arrangement - Easy removal of the finished workpiece by pivoting the top roller - Lower and rear rollers equipped with wire insertion grooves as standard - Optimal price-performance ratio, supplied with a base frame as standard - Roller drive via a robust gear system - Adjustable rear roller for conical rounding Iijdpfshmbpqox Anzjg - Bending rollers made of high-quality steel - For producing cones, tubes, cylinders, etc. Scope of delivery: - Conical bending attachment - Lower and rear rollers with wire insertion grooves - Base frame

Condition: good (used), Year of construction: 1981, Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection -Max. working width: 2500 mm Isdpfxoz Ay Ikj Anzeig -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical rolling option - Pivoting top roller - Brake motor - Foot pedal control - Emergency stop - Documentation Ijdjwfn E Ejpfx Anzjig - 400V

Condition: new, sheet width 700 mm plate thickness 4,0 mm distance between columns 720 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t Iiedpfx Answfyqyezog dimensions of the machine ca. 0,95 x 0,76 x 1,25 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Iisdpfxezx Rz Ho Anzog Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: Iiodpfx Ansyvvrhszsg - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop Ijdjy Aubujpfx Anzeig

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Iisdpfxjza D U Dj Anzeg Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 Iiedoztxn Repfx Anzsg - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, sheet width 2000 mm Ijdpjfv H A Refx Anzoig plate thickness 8 mm pre-bending total power requirement 7,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3600x1250x1350 m

Condition: new, sheet width 1070 mm plate thickness 3,0 mm distance between columns 1100 mm diameter of upper rolls 95 mm tube diameter 140 mm Iodpfjfv A Ewjx Anzoig total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,35 x 0,76 x 1,25 mm

Condition: new, sheet width 1270 mm plate thickness 3,0 mm distance between columns 1300 mm diameter of upper rolls 95 mm Iedofv A Ezopfx Anzeig total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,35 x 0,76 x 1,25 mm

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. You will receive an invoice with VAT shown separately. Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item number: Folding machine KSV / Guillotine shear MT Iisdpjy Rtb Ajfx Anzeg

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement Handbetrieben weight of the machine ca. 0,22 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm Iijdpfsfv A Epox Anzog - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Iodpfxozf Hkdj Anzsig Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: excellent (used), Year of construction: 1994, Technical Data: Iisdpfeyurwvjx Anzjg - 2 hydraulically adjustable rolls - 3 driven rolls - Main motor power: 5.5 kW - Machine can operate horizontally or vertically - Drive shaft diameter: 105 mm - Standard attachment roll diameter: 275 mm - Working speed: 0 – 7 m/min - Digital display Bending Capacities: - Flat steel: 100 x 25 mm - Angle steel: min. 100 x 100 x 12 mm - T-profile: min. 120 x 120 x 13 mm - Round steel: 70 mm - Round pipes: 100 mm - Square tubes: 90 x 90 x 5 mm - CE marking - Dimensions (L x W x H): approx. 1600 x 1500 x 1500 mm - Weight: approx. 3 t Condition: Very good condition Accessories: Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.