Used Seitenmulcher Leicht Mbl 200Lw for sale (354)

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN Nedpfsy Spl Hex Ahkewk YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: good (used), Year of construction: 2020, 2 units available! Rear-mounted shelving system with 4 shelves, 650x300 mm, and 4 support arms for long parts. Perforated back panel. Workplace lighting. Nodpozab Smofx Ahkswk Height adjustment system via handwheel (fine adjustment in 5 mm increments per revolution). Pneumatic clamping device for clamping individual profiles for hardware assembly, 180° swiveling, with locking in 30° increments, locking pneumatically actuated. Clamping position adjustable in the longitudinal direction of the profile. Clamping range for profiles with a construction depth of 45-120 mm and a working width of 50-150 mm, each adjustable in 7 mm increments. 4 pneumatic connections, 5 electrical connections, 2 holders for hand drills or screwdrivers, etc., mounted on a sliding tool drawer. Drawer extends across half the table width on the right.

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Nwedpfx Ajzcqxnohkjk Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Year of construction: 2007, condition: ready for operation (used), A Rösler circular vibratory finishing machine is available. Working bowl volume: 620l, bowl outside diameter: 1650mm, working channel width: 430mm, speed: 1485rpm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Nwsdszlt Nyepfx Ahkek

Condition: used, 🧰 Product Features • Manufacturer: Blume • Condition: used, see photos • Color: galvanized • Length: extendable up to 6.2 m • Width: 75 cm • Height: adjustable from 73 – 113 cm Nwjdpfx Aheyxnmieksk • Roller diameter: 5 cm • Total roller width: 60.5 cm • Load capacity between 2 supports: 120 kg • Conveying weight: max. 35 kg • Swivel casters: 8 pieces with brake • Special features: height adjustable, extendable, movable 💰 Price €1590,- net excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock (Changes and errors in technical data, specifications and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking to buy high-quality warehouse shelving? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete, all-round package: 1. Fixed-price purchase: purchase of merchandise, equipment & entire inventory, including complete clearing. 2. Commission auction: carrying out auctions on behalf of others. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2023, Side mulcher hydr. side shift PTO Walterscheid without clutch / Njdot Hd T Ejpfx Ahkewk

Condition: ready for operation (used), Year of construction: 2022, An assembly line (workpiece carrier assembly system) item Bayern GmbH for loading, assembly, and (return) transport of workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-driven material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions X/Y/Z: approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg, lift system dimensions X/Y/Z: approx. 9700mm/3350mm/1600mm, weight: approx. 400kg, control: item C3-05. The system is modularly adjustable at any time and complies with standardized industrial standards. Documentation available. An on-site inspection is possible. The system is dismantled. Nwsdpfxjw Dfhns Ahksk

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, Vitronics Soltec mySelective 6746 Specifications The Vitronics Soltec mySelective 6746 is an inline selective soldering system designed for PCB through-hole soldering applications. Core Specifications | Specification | Details | |-----|----- | | Machine type | Inline selective wave soldering system | | Soldering method | SelectWave single-point selective soldering | | Fluxing system | X-Y MultiFluxer / drop-jet fluxing | | Preheating | Inline preheater | | Conveyor interface | SMEMA compatible | | Programming | Recipe-driven, barcode-capable | | Teaching system | Integrated teach camera | | Power | 3×400/415V, 50/60 Hz | | Electrical load | Max. approx. 29 kVA | | PCB handling | Inline conveyor with gripper transport | | Process capability | Single-point precision soldering | | Optional offline software| Easy Teach 2 with DXF import | | Networking | Traceability / network capable | | Typical industries | Automotive, aerospace, medical, military | Standard Features Njdpfxey Stx Ro Ahkewk - SelectWave solder pot - Pressurized flux supply - X-Y fluxer - Inline preheater - Teach camera - SMEMA interface - Barcode verification support - Recipe storage and automatic process selection Optional Features - Dual nozzle SelectWave - Closed-loop preheat control - PCB warpage compensation - Advanced solder drainage conditioner (SDC) - Advanced process viewing camera - Easy Teach 2 offline programming Mechanical / Process Notes The system is optimized for: - High-mix, low-to-medium volume production - Compact footprint for efficient use of floor space - Automated traceability - High-reliability soldering applications The conveyor/gripper system allows for process flexibility, including tilted handling (up to 10° as specified in brochures) for complex solder joints. Typical Standard Configuration (for used-market systems) Many installed systems feature: - 410 × 410 mm inline preheater - 130 µm drop-jet nozzle - Infeed/outfeed conveyors - UPS preparation - CE compliant safety features - Transformer packages (208↔400V)

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Nwedpfx Aozgr I Rehkjk Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Nwjdpew D Ev Ejfx Ahkjk Ready to ship worldwide More pictures and videos available upon request

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 747895.1, overall weight: 174 kg, For robot use. Pressing force: 55 kN Total stroke: 98 mm Nodpfx Ajvb Icdohkewk Power stroke: 7 mm The Tox Pressotechnik TZ 05.747895 is a hydropneumatic clinching pliers developed for precise and reliable joints in sheet metal processing. With its innovative technology, it enables the efficient joining of metal parts without additional materials such as welding rod or adhesives. The pliers offer high force transmission and ensure consistent results, even with complex geometries. Thanks to its ergonomic design and user-friendly handling, it is ideal for use in series production as well as in single-part production. The robust design ensures durability and ease of maintenance, while the compact size allows flexible integration into existing production lines.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. Nwodpfszhnafox Ahkek - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: good (used), Year of construction: 2015, Number of suction cups: 4 Maximum load capacity: 1500 kg Nodsy I Rwiepfx Ahkswk Positive tilt angle: 8 Negative tilt angle: 8 Max. glass size: 3.21 m / Min. glass size: 2.20 m Max. glass width: 6.00 m / Min. glass width: 1.90 m Machine for installation Width: 2520 mm Height: 2400 mm Depth: 440 mm Weight: 472 kg Condition: good, second-hand

Condition: used, maximum load weight: 27,650 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 03/2026, loading space volume: 32 m³, Year of construction: 2021, Equipment: ABS, Stock no. 4912 Insulation slightly damaged, tank in good condition! 32,000 Liter Kässbohrer V2A Bitumen Tank Semi-Trailer / Insulated / Accident Damage / Single Owner - Manufacturer: Kässbohrer - Model: STS 32/1 - 10/24 - First registration: 04/2021 - Capacity: 32,000 liters in 1 compartment - Gross weight: 34,000 kg - Unladen weight (per registration papers): 6,350 kg - Payload: 27,650 kg - Axles: 3 x BPW with 1st axle liftable / disc brakes - Suspension: Air suspension with raise and lower function - Tyres: 385/65 R 22.5 approx. 50% on aluminium rims - Colour: Chassis carmine red, tank body white aluminium - EBS Wabco - Roadworthiness certificate (TÜV): valid until 03/2026 - Tank inspection: valid until 04/2027 - Leak test: valid until 04/2030 - ADR certificate valid until 01/04/2026 - Tank code: L4BH - ADR code: FL / AT - Pressure vessel 2 bar - Operating temperature: up to +250°C - 1 dome cover at the front - Access ladder front right with walkway left and right - 4 baffle walls - 1 x thermometer rear right - DN 100 bottom valve at rear, manual operation right side - DN 100 shut-off valve rear right, with handwheel - 3-inch discharge line at rear - 1/2 inch sampling tap at rear - Fire extinguisher box rear right and left (without extinguishers) - Grounding - Open hose tray on right side - LED reversing lights - LED work lamps - Toolbox rear left - Full load support legs - Individual mudguards - Wabco AirSuspension control box - Single owner German trailer!! German documents!! 1st owner!! Insulation slightly damaged, tank in good condition! Disclaimer regarding potential listing errors: Despite careful creation of the listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to verify details or clarify any questions. Nedpfx Ajyawklohkjwk

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Nsdpfx Ahjihiiijkswk Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: used, Year of construction: 2019, Manufacturer : CMA Model : Robotainer (RBT) Year : 2019 Type: Rotary powder mixer / Rotary container mixer Container types: 1,500 and 1,900 litres Number of containers: 4 units Rotation speed: 5 to 11 rpm Nwodpfxjyv R Dre Ahkek Control panel and PLC Safety light curtain Video available in running condition Complete technical file

Condition: used, Year of construction: 2006, Operational condition. Lightning Head Left-to-Right PCB Transfer Direction 3mm (0.117") Edge Clearance HSC Nozzle Changer Kit Nwsdpoxva Dlefx Ahkjk Fixed 36 Slot Feeder Bank 4" Outbound Rear Single Lane Brd Support 30-SPINDLE HEAD PERFORMANCE KIT UPGRADE KIT, ACCURACY ENHANCED SPINDLE Second Rear Interface

Condition: good (used), Year of construction: 2020, PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available Nwedpfx Ahoxxvblskjk -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.

Condition: used, Tumbler Gunther -Type: GPA 200K -Power: 2 kW -With cooling -Capacity: 200 L -Touch control panel (100 program settings) -Rotation direction selectable / asymmetric compartments -Operation period with rotation times and pauses Nwodpfx Ahezldi Rjkjk -Stepless drum speed adjustment -Freely selectable tilt angle -Made of stainless steel -External dimensions: 2160 x 1730 x 2300 mm -Condition: Used

Condition: used, functionality: fully functional, total length: 1,200 mm, total width: 1,050 mm, total height: 1,350 mm, For sale: Inject Star mixing drums. Nedpszguf Ejfx Ahkswk We have 19 drums available, including 15 with lids. Net price per drum: 500 EUR. Price negotiable for larger quantities. Dimensions: Depth 120 cm, Width 105 cm, Height 135 cm with wheels, Height with wheels and lid 156 cm; approximately 900 liters. Weight of the drum without lid: 162 kg.

Condition: ready for operation (used), Production line for cell stacks for 48 V hybrid vehicle batteries Aumann production line for cell stacks for 48 V batteries of the 2nd generation – manufactured in 2023, little used. Assembly – testing – installation of cell stacks into housings for hybrid vehicles. Manufactured in 2023 and little used. Some units are assembled, others are in their original delivery condition. Maximum Battery Size Size: 363 × 175 × 140 mm Maximum Capacity Standard/Performance – 8 Ah / 17.5 Ah The system consists of 7 units that are linked together. 2 images are provided for each system/unit – a separate handout is available for each. Please provide us with your offer price! Technical data can be found in the handout. Any warranty claims are excluded. Nwjdezavwdopfx Ahkjk We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Nwsdpfx Aew Nylkjhksk Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, The ST-1400 universal manual pallet dismantling table is the simplest and most affordable version of a pallet dismantling station, designed for start-up companies or small manufacturers who do not yet require automation. It is a fully manual workbench with manually extendable "combs" for supporting and positioning the horizontal boards. It allows working with pallets with a maximum length of 1400 mm and a working height of up to 1200 mm. Unlike more advanced systems, the Pneumatico ST-1400 does not have pneumatics or automatic clamping devices – all operations are performed manually, which significantly reduces the purchase and maintenance costs, but at the same time means a basic level of equipment, simpler than semi-automatic industrial tables. This solution is particularly well-suited for the production of disposable pallets and for less demanding customers, where low production costs and fast, uncomplicated production are key. Nwedpszgc R Aofx Ahkok It is an ideal choice for small workshops and small-batch production, where simplicity, flexibility, and low initial investment are important.

Condition: used, Year of construction: 2024, PTO shaft Walterscheid W2480- / Njdpfx Aoud H Hhshkowk

Year of construction: 2016, condition: used, Number of machnines 10 0 Cycle time . /min production capacity . Control . Everything must go due to business closure: High-quality machining centers (Deckel Maho, DMG, Mazak, Spinner) & accessories, cabinets, vices, material, grinding machines, EDM machine, measuring machine, on July 16, 2026 Dear Sir or Madam, dear business partners and interested parties, Due to the complete liquidation of the mechanical engineering company Schröter Maschinenbau GmbH, we are organizing an exclusive, one-day sale for the entire company, machine, and workshop equipment. Take this opportunity to acquire professional production facilities and extensive accessories directly from the location. Prospectus & Sale Overview: • Date: Thursday, July 16, 2026 • Time: 9:00 AM to 2:00 PM • Address: Lenneperstr. 188, 42855 Remscheid • Type of Sale: Direct sale against cash payment / or upon pickup and loading. You will receive an invoice. Ex location. Excerpt from the Sales Portfolio: • Multiple CNC Machining Centers: High-precision milling and drilling centers in ready-to-use condition. • Extensive Accessories: Tool holders, clamping devices, vices, measuring technology, and precision tools. • Workshop Equipment: Heavy-duty shelving, workbenches, workshop trolleys, as well as various hand and power tools. Get an Impression: To give you a precise picture of the machines, their condition, and the available accessories in advance, we have compiled a digital overview with photos and technical details for you. Simply click on the following link: ?usp=drive_link Important Notes: The sale is strictly on an "as is, where is" basis and excludes any warranty. The buyer is solely responsible for the dismantling, disassembly, and transport of the purchased items. Nodpfx Aezk Rc Ijhkowk Please plan your visit well in advance! We will close the gates at 2:00 PM. Should it run a bit later, please feel free to contact us by phone! We look forward to your attendance.