Used Wika Manometer for sale (202)

Condition: like new (used), Year of construction: 2016, operating hours: 4 h, machine/vehicle number: 84149090, Complete container station with screw compressor, ready for operation in industrial conditions, equipped with a full air treatment system. Ready for immediate start-up. Only 4 hours of test operation. CONTAINER 10" Specifications: Compressor: Ervor Rafale 50 SP (2016) – screw type, oil-lubricated, fixed-speed Motor power: 37 kW (50 HP) Capacity (FAD): ~260 Nm³/h at 7–9 bar Drive: Belt drive with automatic tensioner Power supply: 400 V / 3 phase / 50 Hz Dryer: Adsorption (2-column, regenerated, timer or DP-controlled) Aftercooler: Air-cooled compressed air aftercooler with ventilation Filtration: Pre-filter, fine filter, and final filter class 1 μm / 0.01 μm Container: 10 or 20-foot, steel, ventilated, insulated, with service doors Control: Control panel + pressure switch, hour meter, phase protection Technical condition: Very good Cold-regenerated dryer Adsorption dryer ERVOR – 2-column air drying system Integrated in the container station. Suitable for continuous operation, with automatic bed regeneration. Pjdpjw D Ut Hefx Ad Sogn The set also includes an aftercooler and a complete set of filters (pre-filter, fine filter, final filter). System ready for industrial or military operation. Final humidity: ≤ -40°C PDP (pressure dew point) Air treatment and cooling system The station is equipped with a multi-stage compressed air treatment system, including: - 3-stage filtration (solid particles, oil, moisture), - Aftercooler with fan, - Insulated and serviceable pipelines, - Control manometers, ball valves, service bypasses, - System designed for heavy-duty use – industrial and mobile applications. Additional photos or video available upon request. We invite you to purchase.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Pjdpfx Adsy Ii Dzo Segn Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, Year of construction: 2026, pressing force: 400 t, DURENDUS 400 T Workshop Press – Single-Column Press – 1,600 mm Clearance Width, 550 mm Stroke The machine shown here has already been built and delivered as a custom order. We can manufacture this machine for you at short notice – also tailored to individual options as required. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €35,950 net Options (on request): The listed options are based on realised customer projects and allow precise adaptation of the machine to your specific application. The basic machine represents a functional standard configuration – in practice, it is usually expanded with additional equipment and configured on a project-specific basis. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral movement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening fixture in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Pressing force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clearance width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm Pgjdpfx Adoy H Dn Eo Ssn * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Precise manual adjustment via control lever * Connection: 400 V / 50 Hz * Total connected power: approx. 23 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Manometer for pressure indication * Emergency stop switch * CE certification * Two-coat paint finish according to RAL ===== Pressing, extraction, assembly work, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customised quote. Our hydraulic presses are manufactured according to German machinery guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they also fully comply with the Brazilian NR 12 national safety standard, which builds on these. Our great strength is in custom machine construction and press automation. We offer made-to-order hydraulic presses at surprisingly attractive prices. For the press hydraulics, we mainly use components from leading European manufacturers.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 2 x 2000L Galvanised Compressed Air Vessels Including certificates Each vessel features: Design: vertical Compressed air vessel volume: 2,000 l Max. overpressure: 11 bar Diameter: Psdpfx Aoy Hx A Rjd Segn 1,150 mm Vessel height: 2,375 mm Weight: 471 kg Compressed air inlet connection: 2x G 2½ Compressed air outlet connection: 2x G 2½ Safety valve connection: G 1 Manometer set connection: G ½ Condensate drain connection: G 2½ Vessel inspection: RL 2014/68/EU Service openings according to AD2000: 2x handhole Min. operating temperature: -10 °C Max. operating temperature: +50 °C Surface coating: galvanised

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – C-Frame Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a specific customer order. We can supply this machine from stock or manufacture a new one for you – gladly taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in the workshop and industrial sector. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to the respective application. The base version represents the basic functional model – in practice, it is most often expanded with additional equipment and configured to suit specific projects. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure control - Sideways movement of the ram (900 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 150 t (adjustable option) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Daylight: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Approach speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Dual-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening, workshop applications, maintenance Pgsdpfjy Hrkuex Ad Son Workshop press, hydraulic press, C-frame press, mounting press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for our hydraulic systems.

Condition: new, Year of construction: 2026, pressing force: 100 t, DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer as a custom order. We can supply you with this machine from stock or manufacture it new – with pleasure, also taking into account specific individual options. This is a hydraulic workshop press suitable for pressing, straightening, and assembly operations in workshop and industrial settings. Base price: €5,990 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine for each specific application. The base machine is a functional standard version – in practice, it is often equipped with additional features and configured project-specific. - Table plate with X-shaped T-slot 650 × 900 × 90 mm - Pressure adjustment - Lateral displacement of the press ram (700 mm) - Bending tool Pjdjy Hqqaspfx Ad Segn - Anti-rotation cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling ===== Technical Data + Information: ==== General Information Design: Workshop press Press force: 100 t (optionally adjustable) Total weight: approx. 900 kg Dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Working Area Clear width: 1,000 mm Open depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø 190 mm Piston rod: Ø 115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer coating according to RAL ===== Pressing, pressing-out, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed the Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety standard NR 12, which is based on these. Our core strength is custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems mainly use components from leading European manufacturers.

Year of construction: 2024, condition: new, Work area 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight, negatively pressurized chamber in a robust steel sheet construction Pedpfx Ajh Hxubjd Ssgn Work gloves Special rubber, abrasion-resistant, cotton lining, firmly connected to the chamber to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight sealing, double-walled, sound-absorbing foam filling, lockable, with electrical shut-off protection Abrasive recovery Via a coordinated MHG recovery system Operation ON/OFF switch for extraction and lighting, pressure regulator, pressure gauge, and foot switch Viewing windows

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Workshop Press – C-Frame Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered as a customer-specific order. We can supply you with this model from stock or manufacture it anew – with consideration for customized options if required. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base price: €3,550 net Options (available on request): The listed options are derived from completed customer projects and enable precise adaptation of the machine to the specific application. The basic model provides a fully functional standard specification; in practice, it is most often enhanced through additional equipment and configured according to project requirements. Cross-grooved T-slot table (from 60 t) Pressure adjustment Lateral movement of the ram (from 60 t) Bending tool (from 60 t) Anti-rotation cylinder with manual travel adjustment V-profile straightening block in combination with table plate LED lighting Foot switch Cooling system ===== Technical Specifications + Information: ==== General Data Design: Workshop press Pressing force: 30 t (optionally adjustable) Total weight: approx. 500 kg Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm Pjdpfx Aey Hixcjd Segn ==== Working Area Clear width: 700 mm Clear throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump capacity: 6.5 l/min Motor power: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer (pressure gauge) Emergency stop switch CE certification Dual-layer coating to RAL standard ===== Pressing, ejection, assembly, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives and European Machinery Directive 2006/42/EC, as well as all EC norms and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core strength is custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are equipped primarily with components from leading European manufacturers.

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec Pgsdpfx Adeyv Nm Sj Son total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position Psdpfx Adsxabcws Sjgn - Hydraulic tank mounted on the side - Operation manual

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: VBM, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20 M 20x1.5 260 Ø -Item No.: 13301-B44-01 -Number: 9x pressure gauges available Podpfxoyfmr Aj Ad Sjgn -Price: per piece -Cardboard dimensions: 310/310/H70 mm -Weight: 4.6 kg/piece

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) Pgsdpsghbkyjfx Ad Sjn - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, Year of construction: 2026, neu 2026 Psdpswirt Iofx Ad Sjgn 070168 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 150 to horizontal verschiebbar 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2480 mm 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 5500 € 106.15 € 30 to fix 775 mm 5 mm/s 10 mm/s 1500 mm 700 mm 2015 mm 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment Pgedpfx Aoypbxfjd Sjn control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8900 € 171.77 € 100 to fix 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s 2500 mm 1000 mm 2200 mm 1600 kg steel welded frame Pgodjypbw Ujpfx Ad Sjn stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 6500 € 125.45 € 70 to fix 900 mm 900 mm Pgodpfxsypbwzj Ad Sjn 1700 mm 700 mm 2100 (PSS: 2300) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 8600 € 165.98 € 100 to horizontal verschiebbar 900 mm 1050 mm 1900 mm 1000 mm 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 Pgodoypbwuopfx Ad Son PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00

Condition: new, Year of construction: 2023, neu 2023 Podpfeypbwnex Ad Sjgn 7295 ca. 12 Wochen ab Auftrags Türkei 22750 € 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm 100 mm 190 mm 2630 mm 1000 mm 2450 mm 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € 125.45 € 60 to fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever Pgsdpfx Adoypbwhj Son according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7300 € 140.89 € 60 to horizontal verschiebbar 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg Pjdpfx Adsypbwbs Ssgn horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6200 € 119.66 € 30 to horizontal verschiebbar 200 mm 775 mm 125x80 mm 5 mm/s 10 mm/s 1500 mm 700 mm 1800 mm 400 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position Pgjdpfx Adeypbv Rs Son pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11500 € 220.8 € 150 to fix 300 mm 1570 mm 280x200 mm 5 mm/s Pgjdpfx Asypbv Dod Ssn 10 mm/s 2500 mm 1000 mm 2270 mm 2100 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10200 € 195.84 € 150 to fix 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2050 mm 1000 mm 2270 mm 1870 kg steel welded frame Pgjdpoypbvwjfx Ad Son stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 5000 € 117.73 € 40 to fix 900 mm 900 mm 1600 mm 700 mm 2050 (PSS: 2250) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: Pgjdpfxjypbvqj Ad Ssn 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 30900 € 590.19 € 200 to horizontal verschiebbar Psdpoypbvksfx Ad Sogn 300 mm 1900 mm 320x210 mm 5 mm/s 20 mm/s 2460 mm 1600 mm 2700 mm 4800 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH (sample photo shows mod. HDK 1570/150)