Used Viscom 3088 Iii for sale (767)

Condition: used, mileage: 29,554 km, power: 130 kW (176.75 HP), first registration: 08/2025, fuel type: diesel, color: grey, gearing type: mechanical, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * 5-year manufacturer's warranty for Germany, starting from the initial registration or up to 150,000 km * 6-seater double cab with partition * Registered as a 3.5t vehicle * Long wheelbase * Standard climate control zones * Electronic Stability Program (ESP) * Tow hitch included * One towing eye at the front * Disc brakes at the front * Front-wheel drive * Multifunction steering wheel * Partition with a fixed window * Three-point automatic seatbelts at the front with electric pretensioners * High roof, painted in vehicle color * Double bench seat in the cab on the right * Seat in the cab on the left * Windshield, heat-absorbing glass * Central locking "Keyless-Go" without safe lock * Dashboard with special fittings * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Emission control system, WLTP3 N1-III, N2//EU6EA * Rubber floor covering in the cab * Wood floor in the cargo area * Registered as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors, left and right, convex and wide-angle * Hinges for rear doors with increased opening angle * Tie-down points for securing cargo * Lane keeping assist * Radiator protection grille * C-rails, side and partition * Interior grab handle (entry at the partition) * Exterior mirrors, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on the rear pillar, left and right * Tire pressure monitoring, 433 MHz high frequency * Start/stop system with recuperation * Park steering assistant * Side marker lights * Halogen twin headlights * Front Assist with warning and braking for vehicles, pedestrians and cyclists * Windshield wiper intermittent control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Daytime running light control with assistant driving light * LED interior lighting concept in the passenger/cargo compartment * Preparation for Smart TCO * Seatbelt monitoring, E-contact in the seatbelt buckle * Wired & Wireless App-Connect * Operating voltage 12 V * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine 2.0 L/130 kW (4V) TDI * Online service, with OCU, without head unit coding, without WFS connection * Driver alertness system * With socket at the front * 6-speed manual transmission Lasdpfx Alj Aauvzoboh * Preparation for alcohol interlock * Entry infotainment radio GP (UNECE) * Preparation for interface for external use, with electrical terminal block * Battery 520A (92Ah) * With rear view camera system (version 2) * Air conditioning with electronic control * With side wind assist * Seat covers in fabric * With UNECE CS&SU * Pan-European eCall * Professional assistance package incl. park steering assistant & * Parking assistance in the front and rear area incl. side protection * With multifunction camera * Heat-absorbing glass * With traffic sign recognition * Digital radio reception * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L Agg. 03N.G * External, USB Type-C data and charging ports with increased charging power * Hill start assist * Parking brake * Front axle "Standard" * Radio Composition with 26 cm (10.4") touch color display with 4 speakers * Vehicle with high-quality double cab conversion as a partition/seat combination (not a cheap bench seat without a partition) Conversion service for panel van commercial vehicles possible: e.g., retrofitting tow hitch 990.00 EUR, increased to

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WDB9560331V245142, mileage: 180,844 km, first registration: 11/2016, fuel type: diesel, empty load weight: 15,156 kg, tire size: 315/70, axle configuration: 6x2, wheelbase: 3,900 mm, axle spacing: 1,350 mm, fuel: diesel, color: red, gearing type: automatic, suspension: air, number of seats: 3, total length: 9,900 mm, total width: 2,500 mm, total height: 3,400 mm, loading space volume: 22 m³, Year of construction: 2016, operating hours: 11,048 h, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, power assisted steering, retarder, tachograph, The subject of this advertisement is a Mercedes Benz Econic truck with a single-compartment JOAB Anaconda HD garbage compactor body. First registration: 02.11.2016 EURO 6 VIN: WDB9560331V245142 Mileage: 180,844 km Engine hours: 11,048 Power: 260 kW Engine capacity: 7698 cm³ Fuel: diesel Number of axles: 3 Drive: 6x2 Number of seats: 3 Suspension: air suspension Transmission: Allison automatic GVW (Gross Vehicle Weight) - 27,000 kg Curb weight - 15,156 kg Payload - 11,844 kg Tire size I, II, III: 315/70 R22.5 Wheelbase: 3900 mm and 1350 mm Body: JOAB Anaconda HD Year: 2016 Capacity: 22.2 m³ Equipment: ABS Differential lock Central locking Electric windows, mirrors Hydraulic power steering Engine brake Hydraulics Immobilizer Intarder retarder On-board computer Manual air conditioning Reversing camera Roof hatch Sun visor Speed limiter Factory radio Adjustable suspension Toolbox Reversing alarm LED lights Strobe lights Tachograph Cruise control Multifunctional steering wheel Twin rear wheels OUR SERVICES Laodpfxjz Slvfj Alboh We provide: Preparation of documentation for registration and customs clearance (including EUR.1 and T1) Transportation of the vehicle to any location worldwide Vehicle service after purchase Repairs and maintenance of the equipment purchased from us Upon customer request: Oil and filter changes in the vehicle and the body. *Comprehensive service and support at every stage of the process. *Possibility of leasing older vehicles, even those up to 18 years old. *If you would like to know the details, please contact us.

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III Laodpfxezzki Ne Alboh - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, Year of construction: 2021, load capacity: 5,000 kg, lifting height: 3,330 mm, total length: 4,400 mm, · Geschwindigkeit mit/ohne Last 24 km/h · Kabinendach aus Kunststoff, Heizung · Achslast beladen kg 10780/1360 · Achslast unbeladen kg 3300/4060 · Neigung Mast/Gabelträger α/β 6/12 ° · Masthöhe ausgefahren mm 4275 · Höhe über Schutzdach (Kabine) mm 2260 · Sitzhöhe bezogen auf SIP/Ständerhöhe mm 1315 · Kupplungshöhe mm 380 · Gabelabmessungen ISO 2331 mm 55/150/1070 · Gabelträger ISO 2328, Klasse/Typ A, B IIIA · Gabelträgerbreite mm 1380 · Bodenfreiheit, beladen, unter Mast mm 145 · Bodenfreiheit Mitte Radstand mm 180 · Gangbreite für Paletten 1000 x 1200 quer mm 4597 · Gangbreite für Paletten 800 x 1200 längs mm 4797 · Wenderadius mm 2830 · Kleinster Drehpunktabstand mm 900 · Fahrgeschwindigkeit beladen/unbeladen Km/h 22/24 · Hubgeschwindigkeit beladen/unbeladen m/s 0.45/0.49 · Senkgeschwindigkeit beladen/unbeladen m/s 0.38/0.26 · Zugkraft beladen/unbeladen kN 28/21 · Steigfähigkeit beladen/unbeladen % 20/20 · Betriebsbremse Mechanisch/Hydraulisch · Beschleunigungszeit Kohler KDL2504 · Motorleistung nach ISO 1585 kW 55.4 · Nenndrehzahl l/min 2200 · Zylinderzahl 4 · Kapazität cm3 2482 · Emissionsgrad gem. gemäß EU-Verordnung 2016/1628 Stage III a · Bordnetzspannung V 12 · Art der Antriebseinheit Drehmomentwandler Lasdpfx Aexl Hn Nolboh · Betriebsdruck für Anbaugeräte bar 200 · Ölmenge für Anbaugeräte L/min 101 · Kraftstofftank, Inhalt 90 l · Anhängekupplung Typ DIN 15170 Bolzen

Condition: excellent (used), operating hours: 5,326 h, lifting height: 3,600 mm, fuel type: diesel, mast type: duplex, power: 63 kW (85.66 HP), motor manufacturer: Perkins, fork length: 1,800 mm, total height: 3,130 mm, total length: 4,200 mm, total width: 2,150 mm, color: other, Year of construction: 2008 Empty weight: 9.700 kg Engine type: Perkins 1104C-44 Lifting capacity: 7.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Lasdpfxjzzcz De Alboh = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Blower - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIA / Tier III General Country of production: Frankrijk Fork adjustment and side shift, Enclosed cab, Forks 1800 mm

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Laodpfexqgxrjx Albjh

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,060 mm, Equipment: ABS, = Additional Options and Accessories = - ADR - BPW axles - EBS - Air suspension - Drum brakes = Notes = Beautiful 2015 VAN HOOL 20FT + 30FT galvanized ADR chassis with ABS/EBS, BPW axles with drum brakes, ADR approval (EX/II, EX/III, FL, AT), for 1x 20FT or 1x 20FT SWAP container, or 1x 30FT tank container, unladen weight: 3,760 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 7/14/11 mm; tread depth right: 8/12/9 mm), Dutch registration. = Further Information = General Information Year of construction: 2015 Registration number: ON-82-VS Axle Configuration Tire size: 385/65-R22.5 Axle brand: BPW Drum Lodpfs Abambjx Alboah Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 45%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 75% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 55% Weights Unladen weight: 3,760 kg Payload: 35,240 kg GVW: 39,000 kg Functional Body brand: Van Hool A3C002 Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 21,000 h, clamping force: 1,270 kN, total width: 1,500 mm, total height: 1,700 mm, overall weight: 5,300 kg, product length (max.): 5,100 mm, This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 510 x 460 mm • Platen dimensions (H x V): 720 x 670 mm • Mold opening stroke: 400 mm • Max. distance between platens: 950 mm • Mold height (min–max): 180–550 mm • Ejection force: 30 kN (3.0 tf) • Ejection stroke: 90 mm • Injection unit code: 14 • Nozzle touch force: 17.7 kN (1.8 tf) Lsdpfx Aloy Iffnobeah • Injection speed (standard): 300 mm/s • Injection speed (high torque): 200 mm/s • Injection speed (high speed): 400 mm/s • Main breaker capacity (standard/high torque): 100 A • Main breaker capacity (high speed): 125 A • Transformer (standard): 75 kVA

Condition: used, Year of construction: 2016, empty load weight: 2,170 kg, Weight: 2170 kg Lodpfxsy T I R De Albjah Lifting capacity: 454 kg Dimensions: 2.30 x 1.20 meters Platform is 90 cm extenable Electric Price each: € 4,750 ex VAT

Condition: used, mileage: 689,000 km, power: 338 kW (459.55 HP), first registration: 08/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FM450 4x2 semi-trailer tractor, ADR EXII/EXIII, Euro 6C, I-Shift transmission, ACC adaptive cruise control, Lane Guard, collision warning system, Globetrotter cab with 2 sleeping berths, auxiliary drive, PTO, leaf spring/air suspension, Alcoa aluminum rims, air conditioning, auxiliary heater, auxiliary air conditioning, heated seats, radio/AUX, CB radio, ECE approval ADR FL/AT/EXII/EXIII Ljdpfozh T I Ujx Albsah Unladen weight 7081 kg Salzhausen

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Every inquiry or offer is tailored to the customer and their requirements. Lajdpfx Aszazirolbeh

Condition: used, This listing is for an MLW LD597 tabletop viscometer. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF095 Lajdpfexzib Rjx Albeh Listing name: MLW LD597 Viscometer

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 Laodpfjylhwgjx Alboh -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. Lajdpfxjv T Un De Albsh The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: new, Rexroth HLC01.1D-05M0-A-007-NNNN, part number: R911308869, serial number: HLC011-01271, unused, 100% functional, scope of delivery as shown in the photos. Laedeldltgopfx Albeh

Condition: new, Heidenhain TTR ECA 4402, 254.93, 180.00, 19998, indexing drum. 1042970-04, serial number: 63088190A, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Lsdpfxei Eazio Albjah

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Lodpfx Alorfwyroboah

Condition: good (used), Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling Lsdpecghg Ujfx Alboah -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

Condition: used, mileage: 636,000 km, power: 331 kW (450.03 HP), first registration: 01/2020, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania R450 4x2 semi-trailer tractor for hazardous goods transport * Euro 6d * OptiCruise transmission * Retarder * Power take-off (PTO) * Leaf spring suspension with air suspension * Long-haul cab with 2 sleeping berths * ACC adaptive cruise control * Lane keeping assist * Emergency braking assist * Differential lock * Alcoa aluminum wheels Ljdpfxozyd Txs Albsah * 2 tanks, 1000 liters (500/500) * Auxiliary air conditioning * Automatic climate control * Auxiliary heater * Heated seats * Refrigerator compartment * Xenon headlights * Multimedia infotainment navigation system * EFH (Extended Factory Hours) * 1st owner * ADR EXII EXIII FL AT MOT valid until 02/27 - Inspection valid until 08/27 ADR valid until 02/27

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,298 mm, turning diameter: 275 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 15 W, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, spindle nose: JIS A2-8, Equipment: documentation/manual, We are offering this well-maintained CNC lathe, complete with powered tool, sub-spindle and Y-axis. It is a 2008 Mori Seiki NL 2500SY/1250 fitted with the MSX-850-III (Mitsubishi) control system. Technical specifications: Turning diameter: 275 / 366 mm Spindle bore diameter: 80 mm Spindle speed main spindle: 4000 1/min Spindle motor main spindle: 18.5/15 Kw Spindle speed second spindle: 6000 1/min Spindle motor second spindle: 11/7,5 Kw Movement X-axis: 260 mm Movement Y-axis: +50 / -50 mm Movement Z-axis: 1345 mm Movement W-axis (subspindle to mainspindle): 1275 mm Min. indexing C-axis: main spindle 0,001 ° Min. indexing C-axis: second spindle 0,001 ° Lajdpfx Alez Nd Dhjbeh Number of tools on turret: 12x Number of driven tools: 12 x Spindle motor driven tools: 6000 1/min Tool Taper: BMT Bar feeder LNS Quick Load Servo lll We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm faceplate 1250 mm workpiece weight 45 t control Siemens Lajdpfx Aey D A D Tjlbeh type System 8 T mm turning speeds 1,1-300 U/min total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 150,023 km, power: 105 kW (142.76 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, total length: 6,961 mm, total width: 1,993 mm, total height: 2,612 mm, loading space length: 4,330 mm, loading space width: 1,780 mm, loading space height: 1,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes-Benz Sprinter II Box Van 314 CDI 4x2 !!! 6 identical Sprinters in stock !!! Wheelbase: 4325 mm Payload: 1144 kg Color: Silver Cargo area: Length: 4.33 m Width: 1.78 m Height: 1.93 m Special equipment: Audio system Audio 15 (radio with color display), Outside temperature display, Roof control unit with reading light (driver/passenger side), Rear door (opening angle 270 degrees), Wooden floor in the cargo area, Metallic paint, Navigation system Becker MAP Pilot, Parktronic system (PTS), Rear stabilizer, Reinforced front stabilizer, Rear door step, Interior paneling in the cargo/passenger compartment: plastic, Auxiliary heater (air) electric, Generator 250 A Additional equipment: 3rd brake light, Lodpfjzr Stdox Albeah Adaptive brake light, Airbag (driver side), Washer fluid level indicator, Exterior mirrors, electrically adjustable and heated, both sides, Exterior mirrors with integrated turn signal, Battery 74 Ah, Braking system with ABS+ASR, Roof lining in the cab, Lockable glove compartment, Body/superstructure: box van with high roof, Child safety lock, Fuel tank: main tank 75 liters, Full-height cargo area partition, Load securing/tie-down points, Headlight range adjustment, Model update, Engine 2.1 L - 105 kW CDI CAT, Wheelbase 4325 mm, Tire repair kit with compressor, Low emissions according to Euro 6 emission standard, Sliding door, cargo/passenger compartment, right side, Safety belt system with warning system (driver side), Seat cover/upholstery: fabric Lima, Seats in the cab: adjustable passenger seat, Service interval display Assyst, Heat-absorbing glass, Permissible total weight 3.50 t Cargo area with shelving system We would also be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, Year of construction: 2016, operating hours: 219 h, load capacity: 454 kg, empty load weight: 2,132 kg, fuel type: electric, Skyjack SJIII-4626 – electric scissor lift Year of manufacture 2016, 219 operating hours. Working height 9.75 m, load capacity 454 kg, weight 2132 kg. Lasdpsz H At Iefx Albeh Dimensions L x W x H: 2.31 x 1.17 x 2.15 m. Electric drive with 24 V battery, hydraulic rear-wheel drive (2WD). Batteries, service, and SUVA inspection valid until September 2026, as stated in the offer. Please confirm the inspection date, scope of inspection, and agreed services for the specific machine. Purchase price EUR 9200 net, plus applicable VAT. Transport costs are quoted separately. Availability and condition will be confirmed personally. Inspection and collection in Ringgenberg by appointment.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Ledez R Aa Repfx Albeah - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 250 h, load capacity: 227 kg, mast type: other, lifting height: 5,800 mm, overall weight: 1,312 kg, next inspection (TÜV): 06/2027, fuel type: electric, We are offering this used Skyjack SJIII-3219 scissor lift, manufactured in 2011. Model number: SJIII-3219 Serial number: 22023360 Year of manufacture: 2011 Voltage: 24 V Machine weight: 1312 kg Platform height: 5.8 m Driving height: 5.8 m Load capacity (in calm wind): 227 kg Max. number of people inside: 2 people Load capacity (outside): 227 kg Max. number of people outside: 1 person System pressure: 207 bar Lifting pressure: 165 bar Wheel load: 570 kg Maximum wind speed: 9.4 m/s Maximum wind speed in calm conditions: 0 m/s Max. manual force (lifting): 400 N Max. manual force (lowering): 200 N Max. drivable slope (inside): 3.5 ° Max. drivable slope (outside): 1.5 ° If you have any questions or require further information, please feel free to send us a message or call us. Laedozhtzbjpfx Albjh