Used Vem Kmerb80G6/288 for sale (592)

Condition: used, machine/vehicle number: 6780216, Year of construction: 2020, operating hours: 1,288 h, load capacity: 2,000 kg, lifting height: 1,500 mm, empty load weight: 850 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 300 Ah Measured battery voltage in idle state: 25 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 850 mm Own weight: 850 kg Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 Operating hours: 1,288 h EQUIPMENT Former Toyota full-service unit Folding platform Battery charger All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Bjdpfxsz Dfqqj Amrjdh Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. Bodpfx Asvpqp Aemrodh • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Condition: used, Year of construction: 2008, machine/vehicle number: Typ: BH-03-2000 / Nr.1331, Sleevemaschine Speed 10.000 bph magazin wiwth 2 rolls and non-stop roll changeover Bdjdpfx Ajz Ib T Nemreh

Condition: excellent (used), functionality: fully functional, Vemag 806 manual filling head Bdodpfx Asv S Iqiemreh Connection with VEMAG HPE and Robot500 series fillers Manual filling head for portioning and filling delicate and liquid products Precise and clean portioning, e.g. fruit fillings, puff pastry, all types of products, coconut macaroons, English muffins, almond cookies, creams, desserts and puddings.

Condition: good (used), functionality: fully functional, Offered is a Vemag twisting gearbox 859 Suitable for Vemag filling machines Further details on request Cash payment or prepayment. Bsdpew Tnh Uofx Amrsdh Sale only to businesses, no guarantee, no warranty.

Condition: excellent (used), functionality: fully functional, VEMAG HP30E | Vacuum filler with chopper and loading system Bodpfx Asziqr Tsmrsdh Manufacturer: VEMAG Maschinenbau GmbH Model / Type: HP30E Power supply: 400 V / 50-60 Hz / 3 phases Hopper capacity: 350 liters Filling capacity: Up to 8700 kg/h Portioning range: From 1 to 99,999 g Portioning speed: Over 600 portions/min The VEMAG HP30E is one of the most powerful and reliable vacuum fillers in the industrial class, designed for continuous, high-performance operation in large meat processing plants, slaughterhouses, delicatessen facilities, and large-scale catering operations. Thanks to the use of a unique dual auger technology (VEMAG Duo-Drive), the raw material is handled extremely gently, which eliminates stress on the meat structure and guarantees a perfect, clear cross-sectional appearance of the finished product. A key advantage of this unit is its integration with a filling chopper. This system allows for simultaneous final comminution of the product to the desired granulation and removal of hard particles (tendons, cartilage) just before the portioning process. The machine performs excellently not only in the production of raw, scalded, or baked sausages, but also in the precise dispensing of meat mixtures, pet food, and other thick food products directly into packaging lines or clipping machines.

Condition: ready for operation (used), Vemag vacuum filler, Model Robot 500 With portion control Twin stainless steel augers Will continuous straight fill Bdsdpfx Amjy N Skaersh With portion weights With PC 878 controls

Condition: like new (used), Year of construction: 2006, For sale: Huvema HU 360 x 1000 VAC conventional lathe, manufactured in 2006. This Huvema lathe is a robust and versatile machine for various metalworking operations. With a maximum turning diameter of approximately 360 mm and a turning length of 1000 mm, the machine is suitable for both general turning work and maintenance and repair tasks. The lathe is designed as a conventional machine, making it practical and easy to operate. The Huvema HU 360 x 1000 VAC is suitable for professional workshops, machine construction companies, maintenance companies, and metalworking businesses. Specifications Turning diameter over bed: 360 mm Turning length: 1,000 mm Turning diameter over cross slide: 220 mm Spindle bore: 38 mm Spindle speed: 30 – 2,200 rpm Motor power: 2.5 kW Voltage: 400 V Tailstock spindle: MK3 Tailstock diameter: 45 mm Tailstock travel: 110 mm Bdjdpfozwpfnex Amrjh Number of feeds: 40 Metric thread cutting: 0.4 – 7 mm Spindle nose: D1-4 / Camlock Dimensions Length: approx. 1,920 mm Width: approx. 920 mm Height: approx. 1,298 mm Weight: approx. 750 kg

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Bodpfx Aszwu Dismredh Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: excellent (used), strapping machine, strapping set, tensioning and sealing device, textile strapping set -Manufacturer: Vematec, textile strapping set 19 mm with tensioning device, unwinder, accessories -Steel reel: with 2x polyester tape width 19 x 1 mm -Staples/reel tensioners: see photos -Transport dimensions: 560/480/H480 mm Bedevrdzwspfx Amredh -Total weight: 32.4 kg

Condition: used, Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 32,880 mm Number of bays / row of shelves: 09 pcs. 2,880 mm each Number of levels plus floor level: 03 pcs. The scope of delivery includes 12x pallet rack uprights, used Material color: green Upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces and load distribution plate Total length: approx. 930 mm Internal width: approx. 102 mm The uprights are pre-assembled ( welded framework ) Bdodpfstr Unfsx Amrjh 3,650 mm high 870 mm deep 66x pallet rack cross beam, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm max. load per pair of beams 1,600 kg with evenly distributed load 132x locking pin, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out 48x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 24x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: approx. 05 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Year of construction: 1996, Woodworking machine, circular saw VEMA TKS LBM, year of manufacture 1996, with milling and drilling attachment. Data for milling and drilling attachment: Speed: 3,000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm. Data for saw: Speed 3000-6000 rpm, blade up to 450 mm, cutting height up to 155 mm, bevel cut 0°-45°, table dimensions 1260x1100mm, width can be extended with a fence, length 2200mm, extra table 750x950mm. Bsdpfx Amehvapherodh

Condition: refurbished (used), This versatile Rovema VPR 250 is the perfect solution for efficient and precise packaging. It is a ‘Second Life’ machine that has been fully refurbished to like-new condition. Suitable for both gusseted bags and pillow bags. Technical specifications: Brand/Model: Rovema VPR 250 Capacity: up to 120 packages per minute Size range (W×L): 70–250 mm × 80–350 mm Options: TTO printer, label dispenser, dosing unit, and more Warranty: 12 months Delivery time: On request Bdsdpeiwdhusfx Amroh Displayed at the Empack 2024 trade fair in Gorinchem

Year of construction: 1990, condition: used, Vema FBKSR 3200mm Year of manufacture: 1990 380 V, 13 Amps 45 degrees 3 speeds: 4000/5000/6500 RPM Maximum saw blade diameter: 400 mm Bdodpoin Hdcjfx Amroh Main motor: 5.5 kW

Condition: new, Year of construction: 2013, plate thickness 1,6 mm pressure 450 MPa 150 x 150 x 90° table surface area 650 x 500 mm 875 mm cutting angle - upper blade 4 ° weight of the machine ca. 0,075 t • manual notching machine with lower frame • sheet thickness: Bdsdpfx Aet Smgxjmroh - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration

Condition: like new (used), Vemag portioning,linking and separating line for sausages Portioning, linking and separating line for sausages type FSL210 (incl.CAN-BUS remote control) Only for CAN-BUS machines Flexible and accurate length portioning, linking and separating of sausages in natural and collagen casing Portion lengths: from 55 mm - no limit, single cut from 40 mm - no limit, for 2 or more sausages Calibre: 13 - 40+ Casing length: up to 430 mm (collagen casing) Bdodpfx Aeumlayemreh

Condition: excellent (used), Year of construction: 2017, 378 USED Vemag bread divider, model Robot 500 - Filler. TECHNICAL DATA: - Weight range: 5 g - 30 kg - Capacity: 2500-2800 pcs/h depending on the weight. Bedpfey Szavjx Amredh The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input current: 15 A, Excellent condition machine from 2012, 15a, 400v, 12Kw. Bdedszl Dx Eopfx Amrsh Includes a folding unit and a feeding arm for wrapping. We speak English, German, and languages of the former Yugoslavia. Contact is also possible via WhatsApp.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum Filler Vemag HP 20E Bdjdpfx Amowim Umsreh Vacuum Filler Brand Vemag Model HP20E Year of production 2011 Power 20kW Voltage 400-460V 37A 3~50/60Hz

Condition: good (used), 1 x Vemag Robot DP 10 vacuum filler with loader. Located in Melksham Wiltshire Bdjdjwb Hihjpfx Amrjh

Condition: ready for operation (used), functionality: fully functional, The Vemag HP10E piston filler meets the needs of processing facilities seeking a high-performance solution for dosing and portioning meat products. It ensures consistent and precise filling, maintaining constant product quality across production runs. As a result, weight deviations are minimized and overall process efficiency is improved. Additionally, the screw technology guarantees gentle handling of the product structure, preserving both appearance and texture. This filler can be easily integrated into an existing production line, as its architecture is compatible with various downstream equipment. The touchscreen interface simplifies adjustments and cycle control, enhancing operator responsiveness. Furthermore, the high throughput supports demanding production rates without sacrificing accuracy, directly contributing to optimization of factory performance. When Europ'Equipement offers a used Vemag HP10E filler, their team inspects all mechanical, electrical, and functional components, ensuring the machine is reliable and ready to operate. Refurbishment also helps control investment costs while maintaining performance levels that meet industrial standards, making this solution both sustainable and economically sound. The Vemag HP10E is suitable for applications involving further processed meats or products that require rapid and reproducible portioning. Its ergonomic design supports daily operation and minimizes operator strain. Overall, this filler represents a smart choice for processors aiming to secure their production process while increasing productivity. Bdsdpjyghrmofx Amreh Technical Specifications: Year of manufacture: 2016 Operating mode: vacuum Installed power: 11 kW SCCR: 5 kA rms Filling capacity: up to 5,700 kg/h Portioning throughput: up to 820 portions/min Technology: screw conveyors for precise dosing Interface: 12″ touchscreen Equipment: adjustable feet 83+PNQB9

Condition: refurbished (used), Year of construction: 2021, Project-related overhaul completed in 2020–2021. Originally built in 1991 and fully refurbished by DL Packaging in 2021. Now available again! Since the refurbishment, the machine has operated for only approx. 150 hours – available immediately. Included: FS 110 forming set for pillow bags, 110 mm width FS 180 forming set for pillow bags, 180 mm width Bdodpfxsx Dapwo Amrsh Markem X65 TTO printer The machine can produce both pillow bags and block-bottom bags. Includes SDX, printer, and forming sets. Capacity: 50–80 bags/min, depending on bag format, film thickness, filling product, dosing system, and synchronization. Delivery time: On request. If you are interested in this machine, it will be modernized by DL Packaging according to your product and specific requirements.

Condition: excellent (used), Inline checkweigher to work with Vemag machines like FM250, MMP220 etc. Excellent condition. Under 1,000 hours from new. Bdodpex Aln Ajfx Amreh

Condition: excellent (used), Year of construction: 2012, We offer the VEMAG Filler Robby 2 vacuum stuffer from 2012 – a high-performance machine for stuffing and portioning meat fillings in meat and food processing plants. The Robby 2 model is a proven solution for manufacturers of sausages, deli products, meat fillings, and convenience foods. VEMAG Robby 2 performs well in processes requiring precise product mass feeding and consistent product quality. This machine is designed for daily production work and is valued for its robust construction and practical application in modern food processing. Thanks to electrical specifications adapted for industrial use, the device can be successfully used as part of a production line or as a standalone stuffing station. Technical specifications: Manufacturer: VEMAG Model: Robby 2 Year: 2012 Power: 7.6 kW Filling capacity: up to 3,000 kg/h Bsdpfxsy N Sgbj Amrjdh Capacity: up to 650 portions per minute Hopper capacity: 230 liters Portioning range: 5 to 60,000 grams SCCR: 5 kA rms Voltage: 220–240 V / 400–460 V / 575 V Current: 11 A E-Diagram: 137 890 002e Weight: 740 kg Machine dimensions: L: 2000 mm, W: 1300 mm, H: 1820 mm Advantages of the VEMAG Robby 2 stuffer precise stuffing and portioning of filling, suitable for the production of sausages and meat products, stable operation in industrial conditions, trusted VEMAG brand, ideal for facilities looking for a used, reliable stuffer.

Condition: used, Industrial vacuum filler Vemag HP 15 E A reliable German powerhouse for medium-sized and large butcher shops. Ideal for the production of all types of sausages, frankfurters, pâtés, and processed meat products. Main advantages: Perfect product quality: The gentle conveying system protects the filling material, guarantees a clear cut, and prevents air inclusions. Highest weight accuracy: The precise servo drive portions to the gram, which minimizes raw material loss. Versatile: Seamless synchronization with all common clipping machines (Poly-Clip, Alpina), cutting and forming lines. High performance: Processes even very firm and cold masses effortlessly with a filling pressure of up to 45 bar. Technical data at a glance: Filling capacity: up to 14,000 kg/h Portioning speed: up to 700 portions/min. Portioning range: from 5 g to 100 kg Hopper capacity: 250 / 350 liters Bdsdpezcazfefx Amreh Control: Vemag PC control (graphic display, program memory)