Used Universal Pipe Bender for sale (6,378)

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit Bedpfx Aksy Nbvxs Eowl • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column Bwedpoy Nbvrjfx Ak Eol • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column Bwsdpfjy Nbu Iex Ak Eol - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer. Bjdsy I Tvnepfx Ak Eowl

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 19859, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 44 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 31i, total height: 3,200 mm, total length: 7,000 mm, total width: 6,000 mm, rotary table diameter: 500 mm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 62 A, Equipment: chip conveyor, documentation/manual, MATSUURA NX-520 Universal Machining Center Bwedpfey I Sq Rox Ak Ejl - Tool holder: SK 40 - A-axis travel: -125° to +10° - C-axis travel: 360° - 5-axis NC rotary table: 500 mm diameter - Includes the tool holders shown in the photos! - Includes coolant system, extraction unit, and chip conveyor Note: The machine vice visible on the rotary table is not included in the scope of delivery! Note: The machine can be transported on a truck up to 2500 mm wide! Note: The item must be collected between 24.08. and 27.08.2026 on a binding, prearranged date. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Bwjdsy I Sfhopfx Ak Esl Note: The machine can be transported on a truck with a width of up to 2,700 mm! Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 table surface area 2.200 x 750 mm Bwsdpfoy I Dg Rex Ak Ejl max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm Bwjdpfx Asy I Db Ijk Eol 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm Bjdpfx Aoy I Dbzjk Eowl 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm Bwedpfsy I Dbujx Ak Esl 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Bodeyvgp Tjpfx Ak Eewl Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Device in good technical condition Visible signs of use Machine is operational

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany Bedpfx Aoyt Ifgjk Eswl • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). Bwsdpfx Ajym Unzek Esl The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Bwedpfoudlymjx Ak Eel

Condition: excellent (used), Year of construction: 1976, x-travel 1100 mm y-travel 700 mm z-travel 500 mm Bwedpfx Akoy Ivdue Eel turning speeds 30 - 2066 U/min weight of the machine ca. 3,2 t dimensions of the machine ca. 2,3 x 2,0 x 1,8 m

Condition: excellent (used), X-axis (Longitudinal): 400 mm Y-axis (Transverse): approx. 175 mm Z-axis (Vertical): 450 mm Table: 250 x 800 mm Spindle taper: ISO 30 Bedsy Itr Nopfx Ak Eewl Quill Digital display: Heidenhain 3-axis VRZ Accessories: Various holders Speeds: 50 to 3400 rpm Weight: approx. 900 kg

Condition: used, Year of construction: 2005, gebraucht 2005 4541 prompt, Zwischenverkauf v China 5700 € 1 40 - 1.300 U/min ISO 30 465 x 230 x 380 mm 1000 x 280 mm 2.2 kW 1400 mm 1300 mm 2200 mm 1120 kg 90 ° 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Bwjdpfx Asyrhr Dsk Esl Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders Does not comply with the German UVV & Austrian AMVO

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Bwedpswwl Sasfx Ak Eel Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Bjdpfxslnfggs Ak Eewl Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: excellent (used), Year of construction: 2006, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt Bodsy Ig R Sopfx Ak Eowl Control ERCOLINA total power requirement 1.1 kW weight ca. 75.0 kg range L-W-H 410 x 1000 x 570 mm current new price incl. accessories ~ 10.000 euros conditions like new ! special price on request ERCOLINA MediBender "MB 42" - Capacity steel tube 42 x 3.0 mm - Capacity gas pipe 1"1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. Bending radius 10-260 mm - Minimum radius 2 x D - Hexagonal tool holder - Min. outside diameter 5 mm - 1/8" gas Equipment : - patented quick tool change system - one bending speed - free-moving foot switch * Bending tool included in the scope of delivery : - D 20 sliding shoe new bending segment R 67 mm - D 32 sliding shoe new bending segment R 82 mm - D 35 Sliding shoe new bending segment R 90 mm - D 42 Sliding shoe new bending segment R 130 mm - D 26 Sliding shoe without bending segment * the bending segments are on order * approx. delivery end of MAY 2026

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M Equipped with Heidenhain TNC 310 control Year of manufacture: 2001 Travel paths: X 500, Y 400, Z 400 mm Speed range: 20 – 4,500 rpm, infinitely variable Includes the following accessories: Manual swivel rotary table with digital display for C + B axes Clamping surface: 700 mm x 500 mm Bwedpfxey Id Sts Ak Eol Electronic handwheel for X, Y, Z axes Splash guard enclosure Machine lamp 4 adjustable-height machine feet Coolant system Operating manual

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors Bjdsy Idhhepfx Ak Eowl * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg Bsdpoy Idfmofx Ak Ejwl dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp Bodpfjy Iddpsx Ak Ejwl

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey Bwodpfjwv Tqbox Ak Ejl