Used Tec-Point Gmbh Motor Koop 173 Tracked Dumper for sale (85,863)

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, manufactured in 2023, with an original price of €100,000.00. Its special feature is that it allows you to digitize components without having to attach targets to the component. This is possible because targets are already located on the housing of the laser scanner and are registered by the tracker unit. This measuring device is very suitable for the rapid digitization of large components of several meters in size, while maintaining a relatively good level of accuracy. The device was calibrated in an ISO 17025 accredited laboratory upon delivery. We recommend having the manufacturer perform a calibration upon taking possession of the device. The scan software is included in the offer. Optionally available is a touch probe for tactile point measurement on objects and a laptop. An excerpt of possible application areas: - Digitization of manufactured components for subsequent metrological evaluation, e.g. as part of initial sample tests Kodpfjw Id E Eex Abfjlu - Digitization of objects/spare parts for subsequent reverse engineering, e.g. for the production of a spare part or design changes - Digitization of larger machine systems and room areas for planning and simulation purposes - Digitization of vehicles in the tuning sector Technical specifications: 3 laser modes Scan rate: Up to 2,600,000 measurements/s Volume accuracy: at 10.4 cubic meters: up to 0.049 mm at 28.6 cubic meters: up to 0.067 mm at 49.0 cubic meters: up to 0.089 mm Recommended component size: 0.1m - 12m Weight, tracker case fully loaded: 37 kg Weight, scanner case fully loaded: 21 kg Weight, tracker unit: 6.8 kg Weight, scanner unit: 1.75 kg The device can be inspected while powered on.

Year of construction: 2018, operating hours: 100 h, condition: used, functionality: fully functional, Force Maincylinder: KN 1.000 Capacity: car/hour 30 Measurement: 2,2x8 mxm Machine weight 18 to Klsdpfslhqbrsx Abfeu Place: Austria Available immediately

Year of construction: 1991, condition: used, Storage tank, insulated, stainless steel, cooling jacket for glycol cooling. Additional title: double-walled tank (coolable) Capacity: 1300 l Width: 1300 mm Height: 2300 mm Formats: Flat conical Klodpfx Aboy N Edtsfju Operation / Control: Manual Material: stainless steel 1.4301 Position: vertical Base construction: on 4 feet Features: double-walled with full jacket cooling, with sampling tap, pipe connections; connections: Outlet DN50, cooling line DN20

Condition: used, Year of construction: 2003, Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Crushing capacity: 6000 b/h Current: 6,5 A Voltage: 380 V Kledpfx Abovcqhxjfou Frequency: 50 Hz Length: 15220 mm Width: 1300 mm Height: 22600 mm Weight: 700 kg Base construction: On dome feet Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

Year of construction: 2006, condition: used, The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry. Capacity: 600 crates/h 10 strokes/min. Power: 5,5 kW Current: 10 A Voltage: 400 V Frequency: 50 Hz Length: 3000 mm Kodpfevcqgnjx Abfolu Width: 1540 mm Height: 2600 mm Weight: 1100 kg Formats: 24 x 0,33 L Vichy Running direction: Right-left Operation / Control: Simatic S7-99 Base construction: Frame, height-adjustable Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet

Condition: used, Year of construction: 2003, Labelling machine Krones Prontomatic Type 12-6/6-4, year of manufacture 1994 - reconditioned. Capacity: 13500 bph Swing-top label Voltage: 400 V Frequency: 50 Hz Length: 2450 mm Width: 2000 mm Height: 2500 mm Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l Machine partitioning: 180mm Running direction: Right - left Kledpjxbpggsfx Abfeu Operation / Control: Simatic S7-300

Condition: used, Year of construction: 1991, Fermentation tank, insulated, stainless steel, cooling jacket for glykol cooling. Additional title: Insulated tank with cooling jacket Capacity: 16 hl Formats: Flat conical Operation / Control: Manual Material: stainless steel 1.4301 Position: vertical Kljdpow Tlhrsfx Abfou Base construction: on 4 feet Features: double-walled with full jacket cooling, with sampling tap, manhole, with matching piping and product pump

Condition: used, Year of construction: 1991, 2 vertical stainless steel pressure tanks from the company Chema Process Engineering GmbH Year of construction: 1991 Contents: 180 hl max. pressure: 4 bar Material: stainless steel with insulation and sheet metal cladding Additional title: 2 pc. Volume: 180 hl Allowed pressure: 4 bar Allowed temperature: 25 °C Test pressure: 4 bar Weight: 2220 kg Material: stainless steel Base construction: with vertical tank with dished bottoms and pipe feet, insulation and sheet metal cladding Klodpfx Abjw Uc Acjfou Features: shell-manhole, nozzle for sampling

Year of construction: 2007, condition: used, Additional title: Residual liquid, bottom, mouth, sidewall control Kodpfexbpg Hsx Abfelu Capacity: 32000 bottles/h Power: 3,6 kW Voltage: 400 V Frequency: 50/60 Hz Compressed air: min. 6 - max. 10 bar Length: 2,5 m Width: 1 m Height: 2,5 m Weight: 1700 kg Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Running direction: right-left Operation / Control: Heuft Features: residual liquid, bottom, body, mouth, side wall

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → Robust machine housing made of cast iron → Automatic application and release of the test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC/HB) → Simple operation Technical Data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Testing method according to Vickers → Cross table 110 x 110 mm / travel range 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness testing device → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONAL Kljdpec Ipckefx Abfsu → VMS3 software (Video Measuring System) → Digital built-in measuring screw (for transmitting the edge distance to the VMS software) → Module "automatic measurement" (only in conjunction with VMS3 software) → PC system / monitor

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm Kljdpfxsc Ipc Uj Abfsu → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil Ksdpfjpbbc Hex Abfjlu - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg Kodpou Smcbofx Abfelu - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement Klsdpfx Abey Sixtjfeu - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Klodpfxsy Sixmo Abfsu Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Ksdpfxjyx Hgbs Abfjlu Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Ksdpfx Asyxccrobfolu The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Klodpfx Abjxt Dk Rjfsu Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany Ksdpfxeyx Hrks Abfolu • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, weight of the machine ca. 110 kg Kledpfx Aewf Rg Sebfou dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Klsdpfx Asytr Swjbfju Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality Klsdpoy Rmwdjfx Abfeu CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device Kljdpfsg Ewwrjx Abfeu -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors to the Mahr multisensor coordinate measuring machines currently in use worldwide. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Maximum workpiece weight: approx. 40 kg on the glass plate Accuracy: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Increased accuracy available on request Traverse speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser - including high-precision USB camera with 2-stage zoom and telecentric beam path - including PTL01 TTL point laser, high-precision, telecentrically coupled - including Renishaw TP200 integrated tactile probe system, optionally expandable - including Quad-Light LED power ring light, programmable illumination - including LED power transmitted light - including Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount Technology - including calibration standard with factory calibration certificate, consisting of a glass plate "circle", calibration sphere and gauge ring Transfer Kjdpfx Asg Ewk Rebfslu - state-of-the-art PT200 CNC controller system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - pull-out controller rack 19" for optimal access in the event of service - modular controller concept open for later upgrades and retrofits - service-optimized controller design for quick access and service times - integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation preparation "on board" - active safety technology for drives, light management and sensors - online remote connection for remote maintenance and online system check - LS circuit breakers for quick fault finding in the event of service - firmware adaptation for volumetric 3D full error compensation Including the powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) can be booked as a special package!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Klodjng Exaspfx Abfou Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site