Used Steering Wheel Testing Machine for sale (86,206)

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Gjdpfxsxrffaj Anksub Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Gujdpfofnm Dqjx Ankjb Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) Gedpsw S Hvzjfx Ankjub If you have any questions, we are happy to answer them by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Gusdpfx Aovx Su Senkob Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Gusdpfx Aor Ixq Renkeb Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Gujdpfx Answ Uifdjkeb Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Gedox A Aa Aepfx Anksub Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Gsdpfxex A Aaio Anksub Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Guedpfxsx Az Sko Anksb Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000# Gsdpfjrtrzdjx Ankjub

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Gujdehvikuspfx Ankjb

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Gedpfxjdtq Ano Ankjub Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Slingshot wheel type suspension line type 1.15 2T Use Dundy 1000mm Houldn 1500 load 500kg with 2 hours of sling wheels 7.5kW with filter system and suspended dust filter. Gjdpodrr U Ssfx Anksub For questions about technical specifications, etc., please contact us in writing or by phone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert-Georg Fischer-Schiffmann and Seidl-Oliver Fritz GmbH & Co. Kg with the long-time known contacts.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood Gedpfxjxmv H Rs Ankeub - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter Godpfx Ast Hw Aaenkoub

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm Gsdpfet Hw Ebsx Anksub max. module 5 min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 min. module 1,5 total power requirement 1 kW Gedet Hwptopfx Ankoub weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Guodpjt Hw N Hefx Anksb Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range: 25 – 85 mm Vertical stroke of master gear slide: 40 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Maximum distance between centers for clamping of measured part: 200 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Standard master gear arbor, diameter: 12,7 mm Gedswkgr Iopfx Anksub

Condition: excellent (used), Module range: 0,1 – 2 mm Gedewkhmtopfx Ankjub Centre distance range for basic slide: 16,5 – 90 mm Vertical stroke: 50 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Measuring accuracy: up to 1 μm Standard master gear arbor, diameter: 12,7 mm

Condition: used, used Michael Deckel S11 - fully functional Gjdpfx Asx Hyn Ienkoub

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Other information Fits to following machines: 28-45TON Delivery terms: FOB Gujdpfx Ansv Nhv Hskeb Transport dimensions (LxWxH): 250015001,2 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 50 h, tractive force with load: 25,000 N, Universal Testing Machine, Model H25KT For tensile, compression, flexural, shear testing, etc., in accordance with EN ISO 7500-1 and ASTM E4 standards. The H25kS is a universal testing machine developed according to the latest standards. The machine operates in compliance with EU radiation protection and safety regulations (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage inside the machine is 48 volts. Key Features • Large, easy-to-read liquid crystal display with backlighting • Graphical or numerical display mode • Alphanumeric file entry • Speed range from 0.001 to 1000 mm/min • High return speed 0.001 to 1000 mm/min • Precise crosshead positioning • Robust load frame • Result output protocol with mean and standard deviation via printer • Wide selection of Windows-based test software for various international standards • RS232 interface mode for PC connectivity • Force measurement accuracy 0.5% across the entire range • Position measurement accuracy 0.001 mm • Equipped with force and displacement alarm system • 32-bit motor controller • 20% digital weight compensation during load cell capacity verification • Automatic motor alarm for over/undervoltage and overheating Specifications: • Force measurement accuracy: ±0.5% of indicated load within 2% to 100% range • Positioning accuracy: ±0.01% or 0.001 mm • Speed accuracy: ±0.005% of selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical Data: • Dual-spindle bench-top model • Maximum load: 25 kN in tension and compression • Maximum travel: 1100 mm without grips • For further details, please refer to the brochure Dimensions: Height: 1600 mm Width: 650 mm Depth: 450 mm Weight: 120 kg Guodpew A Skasfx Ankeb Power Supply: Machine: 50-60 Hz, 2000 W Power supply: 220/240 VAC

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load Gjdpfxjmdn Tro Ankoub return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2003, condition: defective spare-parts repository (used), Test description Gujdpfshvaldsx Anksb