Used Stafsjo Dn50/2" for sale (78,881)

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D Blsdpfszv Tchsx Acnjl - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Rotary milling cutter with 3-roller feed mechanism. Location: Nattheim. Blodpfx Aszd Tgvjcnol

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control Bljdek Dpp Sepfx Acnsl - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) Blsdpfxsg N Db Hj Acnol 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Bljdpfecr S Ecex Acnol Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: used, Year of construction: 2020, mileage: 63,176 km, power: 62 kW (84.30 HP), first registration: 03/2020, overall weight: 3,500 kg, fuel type: diesel, color: yellow, next inspection (TÜV): 09/2028, gearing type: automatic, emission class: euro6, loading space volume: 2 m³, number of seats: 2, Equipment: air conditioning, Internal vehicle number: G266 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: - Chassis: Johnston Truck C 202 - Operating hours of engine: 6078 h - Mileage: 63,176 km - First registration: 03/04/2020 - Fuel: Diesel - Power: 62 kW - Displacement: 2,970 cc - Gross vehicle weight: 3,500 kg - Driver's side: right Johnston C202 The flagship among sweepers. The Bucher and former Johnston sweeper range offers both articulated sweepers and all-wheel drive sweepers. Thus, we can find the right sweeping technology for every application. Sweeping work in parking garages, on sidewalks, in narrow alleys, in industrial areas, and many more. Depending on the version, the machines have a payload of up to 0 kg, but are also available with a permissible total weight of 3.49 tons, making them suitable for use as sidewalk sweepers. The compact sweepers are characterized by high driving comfort and high suction power and are truly exceptional. Financing example: * Internal number: G266 * Purchase price: 32,900.00 EUR * Down payment: 10% * Term: 60 months Bjdpfx Aswibpfscnsll * Monthly rate: 544.93 EUR * Residual value: 4,980.00 EUR If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 15,730 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2021, next inspection (TÜV): 09/2028, Year of construction: 2021, Internal vehicle number: G300385 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,270 kg Loading area: 5,500 mm Bjdpfjxnuk Rjx Acnsll Drum brakes Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 580,505 km, power: 382 kW (519.37 HP), first registration: 09/2016, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/65/22.5, axle configuration: 4x2, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/65/22.5, rear tire size: 315/70/22.5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, parking heater, traction control, MAN TGX 18.520 XLX with retarder - Automatic transmission - Retarder - Differential lock - Leaf - air suspension - 2 x sleeping berth - Air conditioning - Parking heater - cool box - Adaptive cruise control - Lane assistant - Electric exterior mirrors + power windows - Fog lights - EURO 6 - 2 x aluminum tank - Tires: 385/65/22.5 80% 315/70/22.5 50% German vehicle. Very good condition! Export price! MAN TGX 18.520 XLX with retarder - automatic transmission - Retarder - Differential lock - Leaf - air suspension - 2 x sleeping berth - air conditioner - auxiliary heating - cool box - Distance cruise control - lane assistant - Electric door mirrors + power windows - fog lights - EURO 6 - 2 x alloy fuel tank - Tyres: 385/65/22.5 - 315/70/22.5 German vehicle. Very good condition! Export price! MAN TGX 18.520 XLX avec ralentisseur - Boîte de vitesses automatique - Ralentisseur - Blocage de différentiel - lame - suspension pneumatique - 2 x couchette - Climatization - Chauffage autonome - Glacière Bledpfx Acovihq Donsl - Régulateur de distance - Assistant de trajectoire - rétroviseurs extérieurs électriques + lève-vitres - Phares antibrouillard - EURO 6 - Spoiler intégral - Réservoir en aluminum - Tires :385/65/22,5 - 315/70/22,5 En très bon état ! Prix d'exportation ! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and is no substitute for detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Vertical drilling machine with 2 spindles, tested, working. Bedpfx Acezxg Aysnsll 2-pindle vertical drilling machine, tested, working.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2018, loading space length: 11,500 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2018, Equipment: ABS, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 2: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 9,060 kg Payload: 17,940 kg GVWR: 27,000 kg Functional Cooling engine: Diesel and electric (3192 operating hours diesel; 5885 electric) Condition Bledozxhbqjpfx Acnel Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar Blodpfozxhcnsx Acnol - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: used, mileage: 35,000 km, power: 140 kW (190.35 HP), first registration: 07/2022, fuel type: diesel, overall weight: 4,500 kg, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, Equipment: air conditioning, airbag, navigation system, trailer coupling, Sunroof, partition, green environmental badge (4), reversing camera, black, passenger airbag, electric windows, radio, outside temperature display, center armrest, diesel automatic, 3-seater, Euro 6, green environmental badge, multifunction steering wheel, tachograph, center armrest, electric windows, airbags, radio, black leather upholstery, outside temperature display, reversing camera, trailer coupling, navigation system, air conditioning, for 1-2 horses, side ramp, windows in the horse compartment, sunroof, surveillance camera in the horse compartment, stallion partition, separate door at the rear, storage space, saddle and bridle holder, permissible total weight 4,500 kg. FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller at the following number. //*EXCHANGE, TRADE-IN, OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING, ARE POSSIBLE! All information is subject to change without notice.* You can find more offers on our website: The description and stated data do not constitute a guarantee and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale excepted! Bodpfxozxhize Acnoll

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total length: 14,040 mm, total width: 2,600 mm, wheelbase: 8,770 mm, color: other, Year of construction: 2013, Krone, 2013, Thermoking SLX, 2 Evaporators, Saf assen, Pallet crate, Bledezxibfspfx Acnel Lift axle, Full chassis = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 9.731 kg Carrying capacity: 31.269 kg GVW: 41.000 kg APK (MOT): tested until 08/2027 Registration number: OL-65-XR = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, maximum load weight: 32,040 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2014, loading space length: 13,720 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 75 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2014, Equipment: ABS, * Orten SafeSerfer 2-in-1 * SafeSerfer sliding tarpaulin, left; curtainsider, right * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage transport certificate * Draught beer transport certificate * Chemical transport certificate (IBC) * Waste paper transport certificate * 1 row of cargo securing with 2 crossbars * 2,000 kg Bär load securing system * SAF axles * Lift axle * Edscha sliding roof * Rear view camera Bedpozxka Ajfx Acnjll * Tie-down points in the outer frame

Condition: used, maximum load weight: 32,040 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2014, loading space length: 13,720 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 75 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2014, Equipment: ABS, * Orten SafeSerfer 2-in-1 * SafeSerfer sliding tarpaulin, left; curtainsider, right * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage transport certificate * Draught beer transport certificate Bljdpfxjzxkbgo Acnol * Chemical transport certificate (IBC) * Waste paper transport certificate * 1 row of cargo securing with 2 crossbars * 2,000 kg Bär load securing system * SAF axles * Lift axle * Edscha sliding roof * Rear view camera * Tie-down points in the outer frame

Condition: used, mileage: 259,940 km, power: 360 kW (489.46 HP), first registration: 07/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Renault T480 High 4x2 Semi-Tractor | T-High | Retarder | Auxiliary Heater | Alcoa VIN: VF610A36XPD043797 CHASSIS / COMPONENTS * 4x2 * Leaf/air suspension * Wheelbase: 3,800 mm Bledpfx Aezxkcdecnjl * ABS * 2-line compressed air connection * ABS electrical connection * 15-pin electrical connection * Alcoa aluminum rims * 2 x aluminum diesel tanks * Tank 1: 650 liters * Tank 2: 405 liters * Total tank volume: 1,055 liters * Full spoiler * Camera system / side camera TIRES: * Axle 1: 315/70 R22.5, remaining tread approx. 50% * Axle 2: 315/70 R22.5, remaining tread approx. 70% ENGINE / TRANSMISSION * 360 kW / approx. 490 hp // 12,777 cm³ // Euro VI E * 12-speed AMT automatic transmission * Retarder * Differential lock CABIN / DRIVER'S CAB * T-High cab * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * 2 bunks * Refrigerator * Navigation system * Cruise control * Adaptive cruise control * Lane departure warning system * Hands-free system * AUX * USB * Bluetooth * Full spoiler WEIGHTS * Permissible total weight: 18,000 kg * Unladen weight: 8,423 kg * Payload: 9,577 kg OTHER * Color: Blue * Year of manufacture: 2023 * First registration: 07/03/2023 * Mileage: 259,940 km * MOT: 07/2027 * Inspection: 01/2027 * Tachograph test valid until: 06/28/2027 New MOT/inspection and weight adjustments (increase or decrease) are available upon request. We will not leave you alone even after the purchase: We will help you obtain export or temporary registration plates. We can also arrange for the delivery of your vehicle within Germany. Just contact us - we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and typing errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for various applications. With us, not only the vehicle counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our services for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in organizing special transport. Export and temporary registration plates We will help you obtain export or temporary registration plates. Customs formalities We will also support you in customs matters. Vehicle delivery Upon request, we will arrange for the delivery of your vehicle within Germany.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 06/2009, loading space length: 13,590 mm, loading space width: 2,480 mm, loading space height: 2,670 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, wheelbase: 9,040 mm, color: other, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = Bsdjzxcnrepfx Acnsll - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 6.963 kg Carrying capacity: 25.037 kg GVW: 32.000 kg Identification Registration number: OK-03-NV

Condition: used, axle configuration: 2 axles, first registration: 07/2009, loading space length: 12,570 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, total length: 12,950 mm, total width: 2,600 mm, suspension: air, tire size: 385/55 R22.5, wheelbase: 8,980 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - Tailgate = More information = Axle configuration Tyre size: 385/55 R22.5 Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 50% Weights Empty weight: 10.840 kg Carrying capacity: 19.160 kg GVW: 30.000 kg Functional Bodozxcp Nopfx Acnsll Tail lift: Dautel DL 2000S, 2000 kg Identification Registration number: OK-68-XV

Condition: good (used), Year of construction: 2002, - 2 chambers Bledpezwfyzofx Acnjl - Usable volume per chamber = 1100 liters - Internal dimensions per chamber = 1000 x 950 x 1000 mm (W x H x D) - incl. vacuum pump

Condition: used, maximum load weight: 14,010 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2019, next inspection (TÜV): 09/2028, Year of construction: 2019, Equipment: ABS, Internal vehicle number: VTC30016 Available immediately at our location in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions: 6900 x 2550 mm Hydraulic ramps Bsdpfx Aeyrzlkjcnell Axles: BPW Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1997, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location Blodpfx Acezf N Edsnjl - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, mileage: 160,870 km, power: 107 kW (145.48 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 3,040 kg, maximum load weight: 460 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, operating hours: 1,349 h, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), hydraulics, onboard computer, sliding door, soot filter, traction control, trailer coupling, Renault Master 145 dci E6 aerial work platform - Work platform type: KLUBB KL-32 - Hydraulic drive - Max. working height: 12.5m - Lateral outreach: 6.8m - Rotation: 315° - Max. basket load: 200 kg, 2 persons - Control from the basket or with the remote control - Various shelves for tools - ABS - Air conditioning - Driver airbag Bedpfxey S R Hxs Acnsll - Central locking with remote control - 6-speed gearbox - Electric windows and mirrors - CD radio - Tires: 225/65/16 Vehicle from first owner, in very good technical and optical condition. All CE certificates, COC documents, and UVV tests are available. Full TÜV inspection according to §21, UVV inspection for the work platform, and German registration are possible. Errors and prior sale excepted. All information without warranty.

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block Bsdsznuhpopfx Acnell -Prism block: for marking plate, clamping plate, straightening bench ... 2 pieces -Hole spacing: 220 x 90 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 280/275/H200 mm -Weight: 30.1 kg

Condition: used, machine/vehicle number: 008520, Lifting capacity: 180 Kg Blodpfszwdinsx Acnsl Number of controlled axes: 4 axes Arm extension: 3200 mm

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm Blodjzv Sdkepfx Acnsl If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.