Used Skf Bearings for sale (3,003)

Condition: used, Year of construction: 2020, operating hours: 583 h, functionality: fully functional, working width: 650 mm, area performance: 3,900 m²/h, overall weight: 292 kg, tank capacity: 60 l, water tank capacity: 60 l, The Kärcher B60 BP Dose W R65 is a 2020 model and has 583 operating hours. Fsdpfxsz Nfwis Akyepn It has been completely disassembled by us, and each component has been checked for functionality and cleaned. The roller brush deck has been fitted with new bearings and new brushes. The suction foot is equipped with new, oil-resistant rubber lips. Four new, maintenance-free batteries are included in the scope of delivery. These can be conveniently charged using the integrated charger. The roller brush deck is ideal for applications where coarse dirt particles (such as wood splinters) are present. The roller brushes "sweep" the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents any particles from adhering to the suction foot, which could impair the suction performance. For efficient use of cleaning agents, the Kärcher B60 BP Dose has a chemical dosing system. Technical data: Working width: 650 mm Tank volume fresh/dirty water: 60 liters Theoretical area performance: 3900 m²/h Operating weight: 292 kg

Condition: good (used), total height: 900 mm, I am selling a Finnish Aqua Clean spray washing system. It is made of stainless steel and additionally insulated. The washing area has a diameter of 150 cm, and the height is 90 cm. The operating time and temperature can be set up to 90 °C. The spray function operates with a pressure of 4 bar from below, from the sides, and from above. The pump seals have been replaced with chemical-resistant Viton seals. A fan and a fume extraction system are also included. The load-bearing capacity is 800 kg. Shipping to all EU countries is possible. Fedpfx Aksz Nmn Aeyspn

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) Fpjdjz Ipl Hjpfx Akyjn • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Length 3,000 mm Width 1,050 mm Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Fpjdpoz H Na Isfx Akyon Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW Fpodpfx Aksy H N H Hoyjn connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Fedjz Hxhhepfx Akyepn Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1049 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 N steel + with plasma nitriding - Material thickness: approx. 24.5 - 27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Side panel holes in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust, scratches, and welding spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / dimensions 2400 x 1200 x 200 mm - plasma-nitrided version - includes 4x base feet (basic configuration) - Includes accessory set (see Figure 3): * 8x 280626.N Fedpfx Aksz Hz Ikjyepn * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N * 4x 280110.N * 2x 280152.N * 1x 283999

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Fsdpfx Akjfbl Epjyjpn Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: new, Year of construction: 2013, shaft A2 changeable with CALZONI MR 1800 / N5 inclusive flange FL 4 D75 ( connection tubes) ( 2 pieces available) REPARATION SET FOR RADIAL PISTON MOTOR IAM1800 / C model 2013 - new consisting of: 1 x rotary distributor 1 x distributor plate 1 x bearing wave 1 1 x bearing wave 2 1 x seal kit (2 pieces available) jöma price: € 700,- / 1 set Fjdpshpihzjfx Akyspn

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable Fpodpfxjzb Evlj Akyon • User and maintenance manual and CE declaration of conformity

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Fodpsy Smi Ajfx Akyepn Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional Fodpfx Aezcymhekyepn 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP Fjdpfx Akoz N Syqeyopn SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING RIGHT (11 KW) - LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM Fsdpez N Sy Defx Akyepn TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: reconditioned (used), functionality: fully functional, Herminghausen SR2 High-precision and conventional centerless cylindrical grinding machine. The machine is suitable for grinding workpieces up to 40 mm in diameter. High machine and grinding stability due to a robust cast iron bed and hydrodynamic segmental chuck bearing. Its low height provides excellent access to all important functions. Quick and easy changeover for different workpieces and materials. Overhauled: July 2026 Workpiece diameter: 0.5 - 40 mm Fpsdozpf H Sepfx Akyon Grinding wheel dimensions (D x W x H): 290 x 100 x 150 mm Regulating wheel dimensions (D x W x H): 200 x 100 x 120 mm Total weight: 1,200 kg Total power: 5.5 kW / 400 V / 50 Hz

Condition: like new (used), Year of construction: 2009, ABB AMA 500L6A BAFH – 2025 kW (2.025 MW) electric motor – UNUSED For sale is a powerful industrial electric motor, the ABB AMA 500L6A BAFH, with a power rating of 2025 kW (2.025 MW). It was manufactured in Finland in 2009. The motor is unused and is in very good visual condition. The unit comes from the renowned manufacturer ABB, a global leader in electric drives and industrial automation. The motor is designed for demanding industrial applications where high power, reliability, and continuous operation are essential. Technical data: * Manufacturer: ABB Oy, Finland * Model: AMA 500L6A BAFH * Year of manufacture: 2009 Fpodpsz N Tcysfx Akyon * Condition: unused * Maximum power according to nameplate: 2025 kW / 2.025 MW * Voltage: up to 690 V * Current: up to 1997 A * Rotational speed: up to 987.2 rpm * Frequency: up to 49.8 Hz * Power factor: 0.88 * Number of phases: 3 * Winding connection: delta (D) * Degree of protection: IP55 * Insulation class: F * Operating mode: S1 – continuous operation * Cooling: IC611 * Mounting method: IM1001 * Weight: 6670 kg * Serial number: 4598461 * Identification number: 532FN560M01 * Standard: IEC 60034-1 * Power supply: via a frequency converter Application: The motor can be used in large industrial installations, such as: * High-performance industrial pumps * Compressors * Industrial fans * Power generation plants * Metallurgical industry * Chemical and petrochemical plants * Heavy machinery drives * Mining and extraction installations Condition and equipment: The motor is unused and has been stored outside of a production facility. Visually, the unit is in very good condition, with the original ABB paint coating intact. The manufacturer's technical documentation, including electrical diagrams, is included. Due to the long storage period, a standard technical inspection is recommended before commissioning, particularly of the bearings, lubrication, and winding insulation. Additional photos, technical documentation, and transportation can be arranged. Please contact us for detailed information and to receive a commercial offer.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Radial arm saw graule ZS 170N For cutting ALU,PVC and wood Fjdpfx Ajz Nk Elekyopn -cross-cut and mitre circular saws for straight cross-cuts and mitre cuts left and right -stable grey cast iron construction -precise ball bearing guide of the tool slide on hardened and ground steel shafts -manual saw feed fast mitre adjustment up to 25° -readjustable fixed stops at 90° and 45° -lower saw blade protection can be connected to extraction system Motor : 400 V / 3.0 kW Lenght of cut: 410 mm Depth of cut : 170 mm Sawblade diameter : 420 mm The saw is equiped with pneumatical clamping, lubricating unit adn hydraulic saw feed brake. Machine is ready for operation saw blade sharpened. We can ship the machine to your address via shipping company DSV ( On demand)

Condition: excellent (used), Year of construction: 2021, Semi-Automatic and Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operation: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production Speed: Up to 35 loads per hour. Load Capacity: Maximum dynamic load weight: 4,500 lbs – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Fodpfx Ajwb A N Rjkyepn Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck for turntable protection, 3-sided loading, and pit mounting. Forklift openings at the front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation Features: Fully electric – no pneumatics required. Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It provides significant productivity increases and safety benefits. This technology is only available on Cousins machines. This unique method of attaching and cutting the stretch film offers the following advantages: • Selectable top wrap function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are required to power the turntable, reducing maintenance. • Load placement on the turntable is not critical. • No air connections or noisy compressors • New automatic safety feature for load detection during the first revolution detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions. • A-arm fall protection Control Functions: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the center of the wrap Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or shiny loads Separate control for 1 to 12 revolutions of the upper and lower wrap Selectable parameters for reduced film tension for overwrap.

Condition: like new (used), Year of construction: 2019, Air-operated double-acting high-pressure pump The Resato P200-100-2 is an air-operated, double-acting high-pressure pump used to generate pressure for liquids in various industrial applications, such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into a high-pressure liquid flow. Fodpfxjyk Uc Ho Akyepn Manufacturer: Resato Type: P200-100-2/U/V Type: Air-operated, double-acting high-pressure pump Air piston diameter: 200 mm Ratio: 100 Flow rate: 6.6 l/min Weight: 21 kg Year of manufacture: 2019 Max. outlet pressure Regulated by the air supply pressure; with 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type table for P200-100-1/P200-100-2). Compatible media Suitable for water, oil, or an emulsion of both. Can also be used for a wide range of chemical liquids. Materials (media-contacting) All media-contacting parts are made of specially selected stainless steel. Operating medium (drive) Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi). Features Reduced noise level, minimized downtime due to easy maintenance of seals and check valves, prevents the pump from freezing. Applications The P series, to which the P200-100-2 belongs, is used in various industries, including the oil and gas industry, the automotive industry, and research. Typical application areas are: Hydrostatic testing of hoses, valves, pipelines, and pressure vessels. Pressurizing hydraulic components. (Chemical) injection. Disassembly of bearings and bolt tensioning. Research and development. More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, Maximum chipping diameter 100 mm Drive system PTO shaft with shear bolt protection Power range 20 – 50 HP Number of blades 4 + 1 (counter-blade) Blade dimensions 210 x 60 x 9 mm Counter-blade dimensions 197 x 70 x 9 mm Flywheel weight 55 kg Feeding system Hydraulic Hopper dimensions 510 x 510 mm Discharge chute rotation range 360° Fjdpoz I Srvjfx Akyopn Rotational speed 540 – 1000 rpm Weight 315 kg Shipping dimensions (L x W x H) 1140 x 920 x 1920 mm Reinforced construction – a stable, massive 610 mm diameter, 18 mm thick disc ensures high inertia and smooth operation without overloading the tractor engine. 4 cutting blades + 1 counter-blade – made of hardened tool steel and double-edged, ensuring long service life and precise cutting. Hydraulic feeding system – two hydraulically driven toothed rollers and 10-level feed speed adjustment allow the work pace to be adapted to the wood type; a reverse function facilitates material retraction. Independent hydraulic system – built-in hydraulic pump and oil tank; no need to connect to the tractor's hydraulics. Ejection paddle and breaker system – provides additional wood chip fragmentation and effective material discharge via a 360° rotating chute. Drive protection – a PTO shaft with a shear pin protects the system against overload. Bearings with grease nipples – resistant to dust and chips, and easy to service.

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Fpsdpoiu U Txefx Akysn Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: good (used), KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Fpedsd Sqkzjpfx Akyen Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q 17.50 m3/h H 5.8 m Please refer to the data sheet for further information on this pump. 1) The sum of the inlet pressure and the delivery head at zero flow rate must not exceed the specified value. Design Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/pressure nozzle: 160 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Condition: new, NEW Heidenhain incremental rotary encoder ROD 800. 298 466 06 Fpodpfegix Akjx Akysn Incremental rotary encoders with self-bearing Model series: ROD 800 System accuracy ± 1” Mechanically permissible speed: 1000 min–1 Interface: 1 VSS Scope of delivery: 1 piece Item condition: NEW You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), power: 353 kW (479.95 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x6, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, loading space length: 5,500 mm, loading space width: 2,500 mm, Year of construction: 2007, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, power assisted steering, power mirror, trailer coupling, - 4th valve - 4x4 - 5th valve - Aluminum fuel tank - Rear work light - Front work light - Brake booster - Differential lock - Low noise - Enclosed cab - Speed limiter - Cab - Leather interior - Leather upholstery - Air suspension - Air-suspended seats - Air horn - Beacon - Rearview camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Fifth wheel coupling Axle configuration Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 23,375 kg Payload: 13,625 kg GVW: 37,000 kg Functional Mast: Telescopic (13 sections) Lifting capacity: 18,200 kg Number of valves: 4 Crane manufacturer: PALFINGER PK 60002 F +PJ 125 E CE marking: Yes Interior Upholstery: Leather Fpjdpfoz Ngtfjx Akyon Condition Technical condition: Good Optical condition: Good MAN TGA 35.480 8X6 H BL – PALFINGER PK 60002 F + PJ 125 E JIB HEAVY-DUTY CRANE TRUCK / SEMI-TRACTOR TRUCK / FLATBED TRUCK – 35 METER WORKING HEIGHT – MAX. 18,200 KG LIFTING CAPACITY Very well-maintained, extremely versatile, and comprehensively equipped MAN TGA 35.480 8x6 H BL in a heavy-duty configuration as a semi-tractor truck and flatbed truck, equipped with a powerful Palfinger PK 60002 F crane in combination with a Palfinger PJ 125 E fly jib. The crane reaches a maximum working height of approximately 35 meters and has a specified maximum lifting capacity of 18,200 kg. Thanks to the extensive hydraulic 6-point outrigger system, including additional front outriggers, crane operations in front of the cab are also possible within the permissible load-bearing ranges. The vehicle also features a removable and extendable flatbed with aluminum side walls, an adjustable fifth wheel coupling, and a trailer coupling. A particularly versatile heavy-duty crane truck for construction companies, crane service providers, machine installation, steel construction, industrial plants, heavy transport, and demanding lifting operations. VEHICLE DATA - Manufacturer: MAN - Type: TGA 35.480 8x6 H BL - Configuration: Semi-tractor truck / Flatbed truck / Crane truck - Engine power: 480 hp - Drive formula: 8x6 H - Technical weight variant: 37,000 kg - Wheelbase: 4,800 mm - Mileage: 402,568 km - Transmission: Manual transmission - Cab: Sleeper cab - Interior: Leather interior - Rear axles: Air-suspended - Differential locks: Available - Fifth wheel coupling: Adjustable - Trailer coupling: Pintle hitch PALFINGER PK 60002 F + PJ 125 E FLY-JIB Powerful hydraulic crane with an additional fly jib for large reach and demanding lifting operations. Technical crane data: - Crane manufacturer: Palfinger - Main crane: PK 60002 F - Fly jib: Palfinger PJ 125 E - Maximum lifting capacity: 18,200 kg - Maximum working height: Approx. 35 meters - Control: Remote control - Lubrication: Central lubrication system - Winch: Complete with all accessories - Additional hydraulic functions: Up to the tip of the fly jib - Outriggers: 6-point hydraulic outriggers - Front outrigger: Additional supports for crane operations in front of the cab EXTENSIVE CRANE EQUIPMENT The Palfinger PK 60002 F is...

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. Fpsdoz I Tzxepfx Akyjn The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.