Used Shot Blasting Room for sale (1,930)

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Iisdpszd Twbefx Apcjg Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Iodpfxew Nbyce Apcsig Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Year of construction: 2012, condition: ready for operation (used), A repair-required OTI shot blasting machine is offered. 1) OTI GG A2-2500 blasting system, working length: 6000mm. 2) OTI blasting cabinet, cabinet dimensions X/Y/Z: 1650mm/13500mm/3800mm, internally illuminated, with automatically guided blast nozzles and rubber curtains for cabinet protection. 3) Chain conveyor unit, continuously variable motor-driven, with chain guide, roller conveyor, tension frame bearing and chain tensioner. 4) Oscillation, continuously variable motor-driven. 5) Blast media filling station, pneumatically operated, filling hopper: approx. 150kg, with level probe and shut-off slide, max. filling weight: approx. 200kg. 6) Cyclone separator/pre-separator system for separating reusable and spent blast media, with blast media recirculation into the blasting process and Big-Bag collection. 7) Filter system with radial fans, 2x 8 filter cartridges, cartridge dimensions X/Y: 330mm/1000mm, filter area: 14m²/cartridge, extraction capacity: 10000m³/h, with compressed air cleaning. 8) Final filter with pleated filter elements, 2x 2 filter elements, filter element dimensions X/Y: 915mm/915mm, separation efficiency: 99.9%. 9) Control cabinet with controller: Moeller Easy 820/618. 10) Operator panel with beacon/signal light, display, start pushbutton, key switch, emergency stop pushbutton and pressure gauges for operating pressure and inlet pressure. 11) Pressure vessel Maschinen- und Behälterbau GmbH, type MB 030603-1.1000, year of manufacture: 2012, volume: 1000l, permissible pressure: 11bar, min./max. permissible temperature: -10°C/50°C. Documentation available. An on-site inspection is possible. Iodpfxszp Rg Re Apceig

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Iiedpfszdqtmex Apcsg Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. Iiodpfx Ajxr Awaepcjg 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Iiodpfx Apszil Ivecog Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter Iijdjv Idf Iopfx Apcjg With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: excellent (used), Year of construction: 2015, - Continuous flow, suspended part shot blasting system, specifically designed for automatic, continuous surface treatment of suspended workpieces. - Suitable for applications such as derusting, descaling, deburring, fine finishing, final shot blasting, or roughening. - Flexible workpiece suspension. - Efficient blasting technology through high-performance turbines. - Automatic continuous operation. - System dimensions: 12.75 x 6.6 x 10.42 m (W x H x L). - Door opening dimensions: 2.0 x 2.0 m (W x H). Iodpfx Apjzvnnlecjig - Workpiece dimensions: max. diameter 2,100 mm, max. height 2,100 mm, max. hook load 2,000 kg, max. part temperature 80 °C. - Abrasive: round F16-20. - High-performance turbines, type 3.6, quantity 06. - Impeller diameter 380 mm. - Blade width 55 mm. - Number of blades per turbine: 6. - Drive power per turbine: max. 11 kW.

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated Iiodpfx Aowdgi Hspcsg as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Possible to come and see in testing. Iijdpfxsygnm Dj Apcsg

Condition: used, Year of construction: 2006, suction capacity: 10,300 m³/h, negative pressure: 4,400 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is installed on the clean air side, minimizing the risk of explosion. Specifications: Max. airflow: 10,300 m³/h Max. negative pressure: 4,400 Pa Filtration surface area: 126 m² Cartridge filter elements: 6 pcs Motor power: 7.5 kW Inlet diameter: 315 mm Isdpsx Hxycjfx Apceig Unit dimensions: Height: 3.70 m Width: 2.00 m x 1.35 m Base: 1.45 m x 1.02 m Stock number: 1095

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Operating hours: 19,888 h Iiodpfx Apjzxcl Recjg

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. Iiedjzlzv Ijpfx Apcog The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Iiodpfjyvrvpex Apceg Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Iisdoy N Tbmjpfx Apcog Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side-Mounted Arburg Multilift H Robot Injection Unit: Screw Diameter: 55 mm Shot Weight: 434 g Injection Pressure: 1,650 bar Dosage Volume: 474 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA touchscreen Additional Equipment: - Hybrid machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Control with air valve - 1x hydraulic core pull - 12x hot runner control circuits - Injection unit: hardened – bimetallic - Main motor: servomotor driven by frequency inverter – energy saving - Injection unit powered by servomotor controlled by inverter - Machine equipped with nitrogen accumulator/cylinder for rapid operation (additional charge) - Central lubrication - Automatic mold height adjustment - Kistler sensor for mold pressure control - The injection molding machine was operated in a so-called "cleaning room" and includes additional protective measures against contamination and two vapor absorbers - Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Robot and conveyor belt available at additional cost Dimensions: Iedpfx Ajzy I Nqepcoig Weight: 6,680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2003, condition: used, Various shot blasting machines are for sale! Iodpfx Aps Hq S Docjig Roller conveyor shot blasting machine Apron conveyor shot blasting machine Hanger conveyor shot blasting machine Rotary table shot blasting machine Shot blasting booth Pressure blasting pot

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Ijdpfx Aswiuaqepceig Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. Iijdpfsuwlzyox Apcog No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: new, Year of construction: 2025, Shot blasting booth DSK 20.10.09 with trolley and rotary table. Width: 2050mm, Depth: 935mm, Height: 955mm Lift-up door with pneumatic system, offering the advantage that the blasting media falls into the booth when the door is opened, rather than onto the floor. If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Iedpjfnh Rvsfx Apcoig

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 09.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy saving, and very quiet Control with air valve Core pull control 12-fold hot runner control Injection unit hardened - bimetallic Main drive motor - servo motor with inverter for energy saving The injection unit is powered by a servo motor, controlled by inverter Machine with cylinder / compressed nitrogen accumulator (additional charge for fast cycling) Central lubrication Automatic mold height adjustment Kistler sensor – mold pressure regulation The injection molding machine was operated in a so-called 'cleaning room', equipped with extra protective devices against contamination as well as two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2012 Iodpfx Apszy I I Tsceig 5-axis robot: Z-axis driven by servo motor (electric); X-, Y-, and B-axis (rotation) pneumatic Safety package for robot Robot with adapter, conveyor belt with electric height adjustment, protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are test run by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 1996, condition: used, Dust extraction system, fume extraction system, self-cleaning filter, cartridge filter for plasma cutting, laser cutting, sandblasting, and shot blasting. The filter is cleaned pneumatically with pulses of compressed air during operation, which ensures high efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: STURM Model: 3-7x20/140 DLR P Year of manufacture: 1996 Engine power: 7.5 kW Iijdpfx Asif Rluopceg Capacity: 4200 m3/h Inlet diameter: 200 mm Cartridge filter elements: 7 pcs. Filtration area: 140 m2 Includes electrical diagram and partial ductwork.

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Iijdpjwcfvpsfx Apcjg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Free Shipping: 10-day delivery ✈️ ✅✅✅ Energy Efficiency Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ Iijdpfxefvqixo Apcsg ✨Sandblasting Set with Tank✨ ⭕ Sandblasting outdoors, sandblasting indoors, used in mobile sandblasting machines with compressed air. ⭕ Pressure Sandblasting Tank Pressure Sandblasting Tank - Technical Data ✔ Working pressure: 7 bar ✔ Abrasive type: Steel grit, steel shot, garnet, glass beads (glass sand), etc. ✔ Air consumption: L/min, see table below. ❓What is a Pressure Sandblasting Tank❓ ✨ A pressure sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit wherever it is used outdoors to sandblast surfaces that cannot be transported (buildings, large steel structures, etc.). In addition, sandblasting booths can be used to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ As Proton, we have standard sandblasting tanks with 50 l, 100 l, and 200 l. In addition, we can supply various sizes of blasting tanks depending on the need. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblasting worker is not affected by the environment. ⚡️Areas of Application for the Sandblasting Tank⚡️ To achieve the required surface roughness before painting and coating, this system is used in areas where cleaning and decorative finishing are desired. The main applications are in the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard Blasting Tank Sets come with the following equipment.✳️ SANDBLASTING TANK 200 L ►1 pc. Sandblasting control valve ►1 pc. Remote control valve ►1 pc. Quick silencer ►1 pc. Water separator regulator ►1 pc. Remote control handle ►1 pc. Sandblasting flow diverter "Y" connector ►1 set of quick coupling ►20 meters of sandblasting hose ►40 meters of pneumatic double hose ►1 pc. 8 mm Venturi nozzle ►1 pc. 39 mm nozzle holder (MHE-1) ►1 pc. Sandblasting mask ►1 Overall ►1 Pair of gloves ►1 pc. Sandblasting bag ►1 pc. Air stand with 2 outlets ►20 m breathing air hose and connectors ❗❗❗ Compressor requirements for sandblasting tanks Engine power: 37 kW - 50 hp, Air flow: 6.25 m3/min, 7-8 bar pressure, a compressor with the required characteristics is required. It is recommended that the compressor be a screw compressor. ❗❗❗

Condition: new, Year of construction: 2026, Shot blasting booth components: flat conveyor bed, transverse screw conveyor, bucket elevator, dust extraction system, screen, shot media hopper, shot blasting machine, filter system, fan, air ducts, lamella extraction hood, inlet box, electrical control system as a kit without assembly. Alternatively, the system components can also be assembled by our specialized technicians in your premises. Iedpfx Aehc T Nljpcoig