Used Renojava Oil Spraying Automat for sale (27,401)

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Lasdpfx Afsznlbajtod - Delivery Section - High-pile automatic non-stop delivery with conveyor - Sheet deceleration device - Tab insertion device

Condition: not inspected (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 4619, Gubisch UFA reversing transfer unit with 4 shafts, 1st shaft: direct drive 2nd shaft: counter-rotating 3rd shaft: counter-rotating 4th shaft: counter-rotating Working height 115 mm, Spindle speed 6,000 rpm, Spindle diameter 1 x 30 mm and 3 x 40 mm, Maximum circle diameter D = 220 mm, Minimum circle diameter 100 mm, Total power consumption 19 kW, 380 V, 50 Hz, Weight approximately 1,850 kg, in "as is" condition, as inspected, available from the Seevetal warehouse, excluding transport, subject to prior sale. Delivery possible from approximately the end of August 2026. Lsdpoznkyuefx Aftead

Condition: like new (used), Year of construction: 2019, operating hours: 37 h, Manufacturer: K+G Wetter Model: AW U200 Year: 2019 Condition: Used Serial Number: 430/2009 Stock Number: 3399 Hole plate diameter: 200 mm Hopper: 360 litre Working hours: Only 37 hours! Power: 3 x 400V, 50Hz, 52.1kW Dimensions: 3550 x 1500 x 2200 mm Weight: 2400 kg Lodpfxozl D H Ne Aftsad With tensioning device for precutter, bayonet lock nut, sorting device and fill sensor on hopper. Including lifter for 200L tote bins and tool trolley. For fresh and pre-cut frozen product.

Condition: new, Year of construction: 2022, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Laedjznc R Sspfx Aftod The system was acquired in 2022 and has not yet been put into operation! The new price of the system was €672,000 plus VAT! The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm containers: 1,974 Storage locations for 170 mm containers: 276 Block on the back of the storage Rows: 46 Levels: 25 Storage locations for 120 mm containers: 2,020 Storage locations for 170 mm containers: 276 Rack and pinion stacking crane Type: AP 31 including double-deep loading table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Container delivery Pneumatic lowering device for containers: 1 unit Roller conveyor system: approx. 4.5 m Pneumatic stopper, side: 1 unit Drive: 1 unit Electric drive with inverter: 1 unit Pneumatic drive: 2 units Emergency stop button: 1 unit Container storage Pneumatic lowering device for containers: 1 unit Roller conveyor system: approx. 4.5 m RollerDrive element: 1 unit Pneumatic stopper, side: 1 unit Drive: 1 unit Control of the RollerDrive element: 1 unit Electric drive with inverter: 1 unit Pneumatic drive: 2 units Express retrieval Gravity roller conveyor: 1.3 m Subframe for storage reinforcement: 2 units Special delivery RollerDrive element: 1 unit Subframe for storage reinforcement: 2 units Control of the RollerDrive element: 1 unit Pick by Light workstation RollerDrive element: 1 unit Projector: 1 unit Superstructure for storage reinforcement: 1 unit Control of the RollerDrive element: 1 unit Projector control: 1 unit Further technical details can be found in the attached offer.

Condition: used, Year of construction: 2006, Year: 2006 Condition: good Configuration: Lajdpfx Afexfi Rastod - automatic setup – pockets - automatic setpup - rollers - pallet feeder - number of pockets: 6 - cross fold - knife / pocket / knife - touch screan - Delivery is NOT included Specification: - max. size - 780 x 1120 mm - production max. - 215 m/min

Condition: used, Year of construction: 2009, functionality: fully functional, turning diameter: 50 mm, MIYANO ABX-51TH2 CNC Lathe, CNC automatic lathe MIYANO ABX-51TH2 FANUC Series 16i-TB (2009) Turning diameter: 125 mm Bar diameter: 50 mm Chuck diameter: 150 mm X-1 axis travel: 190 mm Z-1 axis travel: 257 mm Y-1 axis travel: +/- 40 mm X-2 axis travel: 190 mm Z-2 axis travel: 500 mm X-3 axis travel: 190 mm Y-3 axis travel: +/- 40 mm Z-3 axis travel: 650 mm Spindle speed: 5000 rpm Bar pitch: 52 mm Main spindle motor: 15 kW Sub spindle motor: 11 kW Number of toolholder stations: 12+12 Automatic bar feeder LNS SPRINT 552-565 (2009) Currently still in use; selling only due to lack of space, as a larger machine will be arriving soon. Heinbuch heads (collets not included). Tooling shown in pictures not included. Lajdjxiv Eljpfx Afted

Condition: used, mileage: 80,000 km, power: 103 kW (140.04 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,098 mm, total height: 2,312 mm, loading space length: 3,550 mm, loading space width: 2,050 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 8318 ----Why autonext? Over 400 cars & commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----1st owner, German vehicle, Non-smoking vehicle Complete service history, exclusively at Volkswagen New brakes front and rear Like-new all-season tires rear Automatic transmission Body style: Box van Massage seat for driver ---- Special features: * Storage Package 2 * Storage compartments: 2 DIN slot in the front under the headliner * Interior lighting in the cab: Reading light in the front * Audio-navigation system Discover Media (touchscreen color display) * Voice control system * Mobile phone interface Bluetooth * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Glove compartment lockable * Equipment package Light + Sight * Driver assistance system: High beam assist (Light Assist) * Rain sensor * Automatic headlight activation * Light assistant (Coming Home, Leaving Home) * Driver assistance package 2 * Driver assistance system: Area monitoring system (Front Assist) with city emergency braking function * Driver assistance system: City emergency braking function * Driver assistance system: Automatic distance control with vehicle stop function (ACC incl. follow to stop) * Driver assistance system: Driver drowsiness detection * Multifunction steering wheel * Driver assistance system: Lane assist * Airbag driver/passenger side, passenger airbag switchable * Exterior mirrors electrically adjustable and heated * On-board tools and jack * Suspension: Dampers and stabilizers reinforced, front and rear * Heated windshield * Remote key (2) foldable * Floor mats cab: Rubber * Air conditioning Climatic (cab) * Position lights (roof) * Spare wheel in driving condition * Rear view camera preparation * Seats in the cab: Double passenger seat with storage compartment * Seats in the cab: Driver and passenger seat heated Laedpfx Aowc Hztjftjd * Seats in the cab: Suspension seat ErgoActive, driver's side (seat adjustment 20-way, massage function) * Underride protection rear * Preparation for 3rd brake light * Front axle reinforced * Warning system for seat belts (driver/passenger side) * Auxiliary heater (air) Standard equipment: Anti-lock Braking System (ABS), Drive type: Front-wheel drive, Exterior mirror convex, left, Exterior mirror convex, right, Turn signal lights LED integrated in exterior mirror, Floor covering in the cab: Rubber, Double headlights, Electronic Stability Program (ESP), Driver assistance system: Hill start assistant, Driver assistance system: Brake assistant (HBA), Power windows electric front, Transmission automatic - (8-speed), Grab handles A-pillars, Interior lighting in the cab: LED, Body/structure: Platform, Fuel tank: 75 l, Radiator grille with chrome strip on top, Steering column (steering wheel) adjustable, Headlight range control, Truck registration, Marker lights on the side, Engine 2.0 l - 103 kW TDI, Multi-function display Plus, Fog light rear, Wheelbase 3640 mm, Diesel particulate filter, Low emission according to exhaust standard Euro 6, SCR system (AdBlue technology), Power steering electro-mechanical, Seat cover / upholstery: Fabric, Start/stop system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Lajdpfx Ajzlqdzjftsd Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt

Condition: used, functionality: fully functional, AMBAS BANDSAW AUTOMATIC TYPE MODEL: SN/AU 250 2C USED MACHINE INTERNAL CODE: SVR 422 Lsdpfxezmxbqo Aftsad

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Lodpfx Afjph Uk Netead Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Ledpfjitylgox Aftjad Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: good (used), KAS Crease Matic Auto 50 Automatic Creaser Machine in very good condition, from a state-owned institution. Laedpfezlgcyjx Aftod Description: Working width up to 500 mm. Sheet length up to 999 mm. Programmer with the ability to store up to 28 creasing/perforation positions. Sheet feeding is automatic, and the machine has a built-in Becker compressor. Easy-to-use control panel with the ability to store up to 99 programs. Sturdy metal construction mounted on wheels for easy movement. A longitudinal perforation tool is included. Creasing of digital prints and laminated sheets is possible. Four creasing widths are included with the machine. Large work table. 230V power supply. Weight 190 kg.

Condition: good (used), Cyklos RPM 350 Plus Automatic Rotary Perforator Machine in very good condition, ready for production. Description: Automatic perforating device with a working width of 350 mm. Frictional sheet feed. Laodpfxjzlgcts Afted Capable of producing 1-5 perforation lines per sheet. Feeder and output tray adapted to A3 and smaller formats. Easy to use. Option to upgrade with a creasing disc. Sheet counter. Adjustable feed speed from 70-130 sheets per minute. 230V power supply. Weight 20 kg. Made in the Czech Republic.

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Lasdpfx Afozlgcmjtod Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: excellent (used), WEISS TECHNIK SC 1000 Salt Spray Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 1000 Machine Type: Salt Spray Test Chamber / Corrosion Test Chamber Test Chamber Volume: approx. 950 liters For sale is a used Weiss Technik SC 1000 salt spray test chamber. The system was developed for professional corrosion, salt spray, and condensation water testing and is ideal for testing laboratories, the automotive industry, research institutions, and industrial quality assurance. The system is equipped with a programmable color touch control panel, an Ethernet network interface, and a test chamber volume of approx. 950 liters. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of Manufacture: 2015 Test Chamber Volume: approx. 950 liters Power Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated Power: 2.6 kW Rated Current: 11.3 A Compressed Air Connection: 4–10 bar (max. 10 bar) Deionized Water: 3–5 bar Lajdpfezlgyrox Aftjd Control System: Programmable color touch control panel Ethernet network interface RS232 interface Dimensions: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test Chamber Dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test Chamber Volume: approx. 950 liters Equipment: 950-liter test chamber Programmable color touch control panel Ethernet network interface RS232 interface Salt spray testing Condensation water testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Transport Data: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Transport Weight: approx. 220 kg Condition: Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of Supply: Weiss Technik SC 1000 salt spray test chamber Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system Lodpexv Sr Iofx Aftsad In good condition, operated without loader, not under power

Condition: good (used), functionality: fully functional, used dough divider rounder Record Erika Automat Classic Q2 30 tlg, checked, with moulding plates, for 30 pieces, weight range from 25 to 120 g, machine no. A110311, 1.5 kW, 3,8 A, 380 V, 50 Hz Ljdpfx Afsy I A Rnotead

Condition: refurbished (used), functionality: fully functional, used dough divider rounder Fortuna Automat 3-30, overhauled, size 3, with square function, with 3 moulding plates, with new stainless steel cutter, for 30 pieces, machine no. A3-8989 E, weight per dough piece 32-70 g, total weight range from 960 to 2,100 g, 147 cm high, 69 cm wide, 80 cm deep, weight 540 kg, 6 A, 380 V, 50 Hz Ledpsx Tizqofx Aftjad

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Packaging Line for Pharmaceutical and Medical Device Products For sale is a high-quality, fully automatic packaging line from the German manufacturer PKM Packaging GmbH / KOCH Pac-Systeme GmbH, manufactured in 2012. The system was developed for demanding secondary packaging processes and is ideally suited for pharmaceutical products, medical devices, diagnostics, healthcare, cosmetics, and similar industries with high quality requirements. The line consists of two interconnected machine modules and handles the complete packaging process – from the automatic erection of folding cartons to product placement and grouping, as well as sealing, labeling, check weighing, and the rejection of defective packaging. The modular design allows for flexible adaptation to different product and packaging formats. The first machine module features an automatic carton erector with a carton magazine, servo-controlled carton feed, folding and erecting station, insertion and transport line, and integrated control stations. The second module includes the collation packer with product grouping, pre-folding station, lifting and transfer system, carton insertion, carton closer, as well as transport and conveyor systems to the discharge point. The high-quality equipment includes an integrated Mettler Toledo Garvens XS3 check weigher (weighing range 7–700 g, resolution 0.1 g), a BLUHM label printing and dispensing system, a Wolke m600 inkjet marking system, and several camera and inspection systems for controlling print quality, labels, and packaging quality. Defective products are automatically detected and rejected. Laodezmp Tqepfx Aftsd Operation is carried out via several modern industrial touch panels with graphical system visualization. The PLC control system features recipe management, user management, fault diagnosis, message storage, and modern servo drive technology with EtherCAT communication for precise and reliable production processes. The complete system is fully enclosed and equipped with interlocked safety doors, emergency stop devices, safety monitoring, and optical signal towers, meeting high requirements for operator and system safety. Technical data: Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 System configuration: 2 machine modules Operating voltage: 400 V AC Frequency: 50 Hz Connected load Module 1: 6 kW Connected load Module 2: 3 kW Compressed air: 6 bar Enclosure type, control cabinet: IP44 The scope of supply includes the complete packaging line with carton erector, insertion and packaging line, collation packer, carton closer, transport and conveyor systems, check weigher, labeling and marking systems, camera and inspection technology, control cabinets, and the existing technical documentation with electrical diagrams, pneumatic diagrams, drawings, and parts lists. The system is in very good condition and is currently located in a pharmaceutical plant. Inspections are possible by appointment. Functional videos, further technical documentation, and information on dismantling, packaging, and worldwide shipping are available upon request.

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Laodpfx Afjq Atyzoted Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available - Laodpfx Ajy A Tpqeftjd

Condition: new, Year of construction: 2026, Rehnen Spraying Table Lacky The advantages: Thanks to its arms, which can rotate 360°, it always provides the best support and a good surface for all workpieces. Ljdpslrrrmsfx Aftead Easily adjustable in height and rotatable by 360° for quick and efficient work. Thanks to its covers, even after intensive use, the arms can still be moved. Height in mm: 950-1250 Width in mm: 600-1120 Length in mm: 700-1260 Diagonal in mm: 900-1680 Load capacity in kg: 100 Location: in stock – available immediately.

Condition: new, Year of construction: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy to maintain, long filter life - Universally applicable, variable accessories - High flexibility - Mobile design - Extraction technology with front plate system Lajdpfx Afsbpg E Estsd Technical data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Airflow: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Condition: excellent (used), Year of construction: 2014, Binks Raptor Lite AirCombi Spray Unit The Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA4400M. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical fields of application: - Furniture and wood industry - Aerospace - Off-road - Metal processing - Truck trailer and semi-trailer manufacturing - And many more… Suitable for the following materials: - Wood stains, paints and glazes - Primers, sealants, and undercoats - Solvent-based and water-based paints - Polyurethane - And many others… 32:1 AirCombi Spray Package - Patented magnetic shift for rapid, pulsation-free stroke changeover - All wetted parts made from stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance effort and minimal downtime - Fixed, spring-preloaded packings - Large sight glass for separating agents Lasdpfx Afsy A Ni Tetod - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 – ratio 32:1 - Maximum material flow: 4 l/min - Maximum operating pressure: 256 bar Location: in stock, 54634 Bitburg - Available immediately -

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Lodpfx Afjxvivqetsad Technical data: see photos Location: ex-site Saarland