Used Reishauer Rz 301 S for sale (69,038)

Condition: used, mileage: 202,092 km, power: 290 kW (394.29 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, color: orange, emission class: euro6, total length: 7,700 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, soot filter, MB 2640 Multilift Roll-off Truck 6x4 Suspension: Leaf-air Wheelbase: 3.60 m Payload: 14,565 kg HIAB Hooklift Type: XR21S46 - W - IT2B- Year: 2016 4.80 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Step with handrail on the roof, Exhaust to the lower right, Brake connection standard and DuoMatic, Air horn, Suspension: Front springs 8.0 t, 3 leaves, Transmission: 12-speed - Type: G 230-12, Rear lights, construction site version, Info display 10.4 cm with additional display, Interior filter for construction vehicles, Fuel tank: 290 L steel, left, Air intake from the front, Parameterizable special module, Rotating beacon left/right, Reversing warning audible (warning signal outside), Rear cross member reinforced, Protective plate under main tank, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sunshade for side window, driver's door, Additional stabilizer, Rear axle / trailing axle, Storage flap outside left, 24V socket in the passenger footwell, additional, Stone chip protection grille Additional Equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Codpfxozf Sg Ds Albjhb Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Rear axle bevel gear 233, Interior filter: Pollen filter, Steering power pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Frame lowering without air spring residual pressure control, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger multi-adjustable seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler transmission We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to change and prior sale.

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Cjdpfjzupayox Albjhb Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment Cjdoztxdfopfx Albjhb - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Codpfexc Niksx Albshb

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Cjdpfx Aljwqqv Debjhb

Condition: new, SEW Eurodrive R17F DRS71M4 / TH gearbox motor, serial number: 01.1736146301.0006.11, unused, 100% functional, scope of delivery as shown in the photos. Cedoi D N Ruspfx Albshb

Condition: ready for operation (used), Siemens 1FT6084-1AF71-4AG1 synchronous servo motor SN:YFN515997301013, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Chjdpfsvl Uvxex Albsb

Condition: ready for operation (used), Siemens 1FK6101-8AF71-1EH0 synchronous servomotor, serial number: YFB528326301001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Cedpfx Alei D Rbaebehb

Condition: new, Siemens 1FK7063-2AF71-1TH0 synchronous motor, serial number: YFK0611100301001, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Csdpfxoi D Rl Ij Albjhb

Condition: ready for operation (used), Siemens 1FT6064-6AC71-4AK0 - Z synchronous servo motor SN:EJ392601301001, Z= see nameplate, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please ask for price separately! Csdpfx Aleriqgqsbjhb

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Chsdpjlatz Dsfx Albob - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, maximum load weight: 31,879 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2014, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, total length: 13,630 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2014, Equipment: ABS, * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * 4 rows of load securing * 25 pairs of lashing rings Chsdpfoq Hg S Uex Albob * Galvanized chassis * Lift axle * Disc brakes * Full air suspension * ABS * 385/65 R 22.5 tires * Rear portal doors

Condition: good (used), A-100730-Horizontaltank 16m3 Horizontal tanks 16.000 L, Stainless Steel AISI 316, Dimension: Ø 2530 mm X H 2900 m L 3800 mm Manhole at front Only 2 pieces identical to offer Cedpfeiiyufsx Albjhb

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW Chsdpfxjuz Hmxs Albob - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, rated capacity 265 kVA capacity in kVA 320 kVA Heating capacity / kW power fuel Diesel required space 3,25x1,14x1,7 m Diesel emergency generator generator 10 cylinders Codpfx Aeuddfhslbshb MAN D2530MT E Engine number: 43036630914101 Siemens engine Type: 1FC352 B5/B20 IP23

Condition: ready for operation (used), functionality: fully functional, power: 150 kW (203.94 HP), first registration: 12/2026, fuel: diesel, From our stock of used vehicles, we offer you: Fire engine HLF 10 on MB ATEGO 815 4x2 Chassis • Mercedes Benz MB 815D with manual transmission • 110 kW / 150 hp at 4249 cm³ • Power steering • Trailer coupling • First registration 12/2006 • Mileage approx. 28,750 km • Three-point seat belts for all 9 seats Superstructure • Manufacturer: Rosenbauer • 2 PA in the cab + 2 in the superstructure Chjdpfxjzi Ubfo Albeb • Design: HLF 10 • Pump capacity 10-1000 • Water tank 1,000 l • Stowage for standard equipment • FIAMM signaling system • 230 V charging system A complete inspection and maintenance will be carried out on the vehicle. This includes a thorough check of all technical components such as the engine, transmission, differential, and pumps, as well as the replacement of all filters and lubricants. The vehicles will receive a current TÜV (technical inspection) and SP (safety inspection) certificate. We will be happy to provide you with a specific offer and give you a detailed presentation of the vehicle. Note: All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. Images may show optional equipment. This does not constitute an offer, but rather information. Subject to prior sale!

Condition: like new (used), mileage: 800,000 km, fuel type: diesel, Year of construction: 2020, IVECO S-WAY 480, YEAR 2020, AUTOMATIC TRANSMISSION, RETARDER, HYDRAULIC SYSTEM, ADR 🧯, ALLOY WHEELS, DOUBLE FUEL TANKS, SPOILERS, SIDE SKIRTS, NAVIGATION SYSTEM, STATIONARY AIR CONDITIONING, 800,000 KM, FULL SERVICE HISTORY, NATIONAL VEHICLE, FINANCING OR LEASING AVAILABLE ON SITE. Chodjyy U Rqspfx Albeb

Condition: excellent (used), mileage: 303,932 km, power: 427 kW (580.56 HP), first registration: 06/2019, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: retarder, = Additional options and accessories = - Intarder - PTO - Tipping hydraulics = Remarks = WDB96402410366545 = More information = Number of cylinders: 6 Engine capacity: 15.569 cc Empty weight: 15.350 kg Carrying capacity: 10.650 kg GVW: 26.000 kg Crane: PALFINGER Z15, year of manufacture 2022, behind the cab Technical condition: very good Visual appearance: very good Registration number: 1WJE261 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Chedpfszvhbrex Albeb Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is dismantled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. Csdozv Hxpepfx Albehb See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, fork length: 2,300 mm, Fork positioner ISO class: ISO class 2 = 1,000 – 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2021, ISO 3A (51 cm), capacity 5,000 kg, sideshift, opening range 500-1,440 mm, width 1,350 mm, forks 2,300 mm, ID OS1603 Cedpfx Aow Egmuolbshb

Condition: used, Year of construction: 2000, operating hours: 7,479 h, load capacity: 2,900 kg, lifting height: 4,500 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, Front forklift with fork adjustment and side shifter Lighting Side shifter Fork adjustment Protective roof Driver's seat with hydraulic suspension for enhanced comfort Fork extension Cedpjzu Uxhjfx Albjhb Permissible total weight: 4,500 kg Forklift in good overall condition. No liability for typing and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers manufactured between 2000 and 2026. Nationwide delivery possible.

Condition: ready for operation (used), Alfa Laval M6-MFM plate heat exchanger 30103-32067 - 6 bar - with inspection report, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Cjdpoztmkaefx Albehb

Condition: used, first registration: 06/2016, empty load weight: 1 kg, maximum load weight: 17,999 kg, overall weight: 18,000 kg, tire size: 385/55 22,5, tire condition: 70 %, axle configuration: 2 axles, color: silver, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2016, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, Equipment: ABS, truck registration, Reference number for inquiries: 41707 Fliegl, ZWP * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Air connection, coupling head (red + yellow) * 15-pole connector plug * Lifting and lowering device * Galvanized * Suspension: Air * Total weight: 18,000 kg * Tare weight: 1 kg * Payload: 17,999 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60% -- 60%, tire size: 385/55 R22.5 * Tire condition, 2nd axle: 70% -- 70%, tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Trailer has been little used * Rotating beacon at the rear * Lifting range: 1080 mm to 1430 mm Disclaimer: Subject to change, prior sale, and errors excepted. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. Codpfx Aljzvlmfsbjhb * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG18000SE-3D, overall weight: 280 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 13 kW (17.68 HP), output current: 50 A, output voltage: 230 V, nominal power: 12 kW (16.32 HP), continuous power: 12 kW (16.32 HP), total length: 1,220 mm, total width: 750 mm, total height: 810 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG18000SE-3D generator offers a continuous output of 12 kW with its reliable 4-stroke engine. You can operate the DG18000SE-3D generator for up to 8–10 hours with its 30-liter tank. You can start the generator via electric start or recoil start. The starter battery is charged during operation, thus enabling easy starting the next time you use it. Technical data: Maximum power: 13 kW Rated power: 12 kW Frequency: 50 Hz Speed: 3000 rpm Rated voltage: 230 V / 400 V Power factor (cosφ): 1.0 Power: SINGLE-PHASE / THREE-PHASE Starting system: Electric start or recoil start Noise level (7m): 75–78 dB Tank capacity: 30 L Cedpfx Aezvm A Uolbehb Dimensions: 1220 × 750 × 810 mm Weight: 280 kg

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 3171, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, Bylaser 4400. CO2 laser. Sheet metal thickness: steel, 20 mm. The sheet metal laser is being sold due to the purchase of a new laser. Very few operating hours (see photo). Includes cooling unit. Complete documentation is available. Regular maintenance performed. Chjdozvnciepfx Albob Dust extraction system, manufacturer Donaldson DFPRE4L-R, can be purchased separately (see separate listing). Without vacuum suction unit. Can be inspected while powered on until September 14, 2026. No dismantling included. Dismantling must be organized independently. Dismantling must be completed between September 15 and 17, 2026.