Used Reinecker Kopp Vsc 250 Ds for sale (12,260)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws Nledpfx Asv Uqwded Sec - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Nledpsyl U Tuofx Ad Soc Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. System components: SCARA robot Camera-based part detection (vision system) Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Typical applications: Automatic assembly Sorting and transferring of small parts Nljdow Rm Hwspfx Ad Sec Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR Nljdpoya Nf Ijfx Ad Sec 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: used, Year of construction: 1975, max. bore diameter to be ground 6 bis 100 mm Nlsdpoucgwkjfx Ad Ssc stroke - stepless adjustable 550 mm grinding depth ca. 250 mm workpiece weight 150 kg total power requirement 15 kW weight of the machine ca. 4.300 kg dimensions of the machine ca. 2,7 x2,4 x 2,2 m

Condition: used, System: Mobile dewatering system, decanter, and mobile centrifuge - used Application: Sludge dewatering Nlsdpfjwmwrqex Ad Ssc Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Operating hours: 29,200 Generator operating hours: 31,640 (see enclosed nameplate)

Condition: used, System: Decanter Nlodpfx Adovz Rwke Soc Type: Alfa Laval DSNX 4250 Year of manufacture: 1995 Speed: 2950 rpm Gearbox: 2.71 Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 8/77 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 44 -Brake: 220 V -Price: per piece -Number: 1x available -Dimensions: 590/200/H270 mm -Weight: 36 kg Nlsdpfxjct Er Ej Ad Ssc

Condition: used, Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit -Festo type: DSL-32-50-270-P-S2-CC-KF -Piston: Ø 32 mm -Stroke: 50 mm Njdpfed S Dahex Ad Sjlc -Swivel angle: 0 to 272° -Max. Pressure: 8 bar -Dimensions: 335/105/H105 mm -Weight: 3.7 kg

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Nodpfjw Uf Tkjx Ad Solc Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: good (used), Year of construction: 2018, Manufacturer: DS AUTOMOTION GmbH Machine type: Industrial truck Design: driverless transport vehicle (AGV) Year of construction: 2018 Operating hours: 504 hrs Mileage: 870 km Condition: good (expert opinion by Dekra) Speed v min.: 0.1 m/s Speed v max.: 1.2 m/s Transport load: 1,200 kg Drive type: Servo geared motor, brushless Drive power: 2x 1.09 kW Operating modes: Automatic (control station) or manual operation (wired remote control) Power supply: Lithium ion battery 24 VDC (25.2 VDC) Make: Triathlon Battery capacity: 100 Ah Battery weight: 50 kg Area of use: closed room, max. 80% humidity Length FTS: 1,650 mm Width FTS: 990 mm Njdpfx Ast Ebgtjd Selc Height FTS: 505 mm AGV ground clearance: 30 mm Max. length of transported goods: 2700 mm Max. width of transported goods: 1800 mm

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Njdpfxex N A Dwo Ad Sslc Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Vise Jaw width 200 mm Jaw height 80 mm Base plate: width at the bottom 250 mm Length at the bottom 500 mm Opening width 250 mm Nodpfsdd Tpiex Ad Solc Weight 72 kg

Condition: used, New: No Nsdpfx Adeur S E Hj Selc Part suitable for: trucks Damage: none VAT/differential taxation: VAT deductible

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Nlodpjx Apckefx Ad Ssc

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Nledpfx Adszdkhks Soc Chip conveyor Tool magazine (30 pieces)

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Nlodpfxov Dpy Ns Ad Soc Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: used, Year of construction: 1994, x-axis 7.300 mm y-axis 3.100 mm z-axis 1.500 mm control Heidenhain Nlsdpfx Aezhcined Ssc surface area B 2500 x L 7000 x H 750 mm no. of flutes 13 Stück flute distance 200 mm groove width 28H8 mm max. workpiece weight 4 t/m² drive capacity - main spindle 40 kW tool taper ISO 50 max. spindle tunring speed 4.000 U/min work spindle adjustment 3600 mm stroke senkrecht 1.250 mm spindle diameter 120 mm

Condition: used, Year of construction: 2005, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Siemens 840D Njdpfozhch Dox Ad Sjlc total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 530 mm, travel distance Z-axis: 750 mm, spindle motor power: 38,000 W, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis EMAG VTC 250 vertical turning machine was manufactured in 2009. It features a maximum workpiece diameter of 140 mm and a workpiece length of 630 mm. The machine is equipped with a chuck diameter of 250 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 250 machine we have for sale. Contact us for further details. - Workpiece Diameter Max: 140 mm- Workpiece Length Max: 630 mm- Chuck Diameter: 250 mm- Main Spindle Speed Max: 5,000 rpm- Main Spindle Power (40% ED): 38 kW- Main Spindle Torque (40% ED): 450 Nm- Rapid Traverse Rate X / Z: 30 / 40 m/min- Tool Taper: VDI 40- Number of Turrets: 2- Total Tool Stations: 2 x 11 (22 stations total, all live capable)- Integrated Automation: Self-loading pick-up spindle design with workpiece storage tracks- the technical specifications may vary slightly Nodpfozhblusx Ad Selc Technical Specification Driven Tools Yes

Condition: used, Year of construction: 2006, Nominal volume flow: 4400 m³/h. Suction nozzle: 250 mm. Motor power: 5.5 kW. Nominal speed: 2880 rpm. Equipped with a fire extinguishing system. Weight: 730 kg. Location: Nattheim. Nljdpsyw Tw Djfx Ad Sjc

Condition: new, NEW ! all stainless steel suitable for eurobins of 200L Nlsdpfxjzg U D Ue Ad Sec discharging height : ± 1.150 mm 0,37 kW can be operated from both sides mobile loading : max. 350 kg dimensions (l x w x h) : ± 1.020 x 1.250 x 1.150 mm

Condition: ready for operation (used), Year of construction: 2004, Centrifugal pump, pump, KSB Etanorm mx 125-250 NA, Used machine Nljdpsuhl R Hjfx Ad Sec Overall dimensions :1690 x 780 x 1000 mm Weight: 1000 kg Manufacturer:KSB Type:Etanorm mx 125-250 NA Year of manufacture: 2004 Electrical data: 400 V; 50 HZ; 2980 rpm; 110 kw; 190 A Lifting height: 75,5 m Pump capacity: 5920 L/min

Condition: used, Manufacturer: Mineralwerke Type: PZ 250 M4 Voltage: 380 V Output: 55 kW Njdjh D Hmvspfx Ad Solc Weight: 1950 kg

Condition: ready for operation (used), Emulsion Treatment System with Chip Conveyor,vacuum rotation filter KNOLL VRF 250, Used Machine Manufacturer: KNOLL Type: VRF 250 Overall dimensions: Width: 2300 mm Depth: 1860 mm Height: 2300 mm Weight: 1140 kg Year of manufacture: 2020 Electrical data: 400V; 14.64 kW Tank capacity: 1450 l Filter capacity: 250 l/min Njdpfx Asw T U Nrjd Sslc