Used Rehnen Machinenbau Plate Swivel Fix for sale (19,477)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) Fgsdpozv Eglofx Albjg NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Fedpfsr Ig H Tex Albegg Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2645 /4434, Technical specifications: 1 Schmalz column-mounted swing jib crane, model NL 50KG, year of manufacture 2018 Crane is available in quantities of 2!!! Load capacity at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for additional workshop tools) Overall height: approx. 2.52 m, outreach: approx. 1.8 + 1.25 m, lower boom: approx. 2.35 / 2.5 m Base plate: 30 x 30 cm Total weight approx. 300 kg including vacuum unit Connection to 400V 16A, swivel range 270 + 90° Crane is disassembled and packed on a pallet Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new. See pictures Fgjdpozvrn Ajfx Albog Shipping via freight forwarder or collection by appointment.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Fedpjzung Esfx Albjgg Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Fgjdozv E Dwspfx Albjg Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Shipping by freight forwarder or collection only after prior arrangement.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Mould carrier for polyurethane processing, swivelling universal mould carrier, condition good to very good, including control system and hydraulic unit, clamping area approx. 1250 x 1400 mm, parallel stroke 200 mm, with additional intermediate plate, not part of the offer, opening width 897 mm, swivel angle 40°, dimensions (H x W x D) 2410 x 1863 x 3310 mm, safeguarded by light barriers, inspection possible by appointment, drawings and further technical data available on request. Fgodpfexqmnaex Albeg

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Fsdpfx Aleykl Iasbogg Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 Fjdpezu Ryhefx Albogg - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: good (used), Year of construction: 1984, Grinding wheelhead: - motor power : 2,2 kW - spindle speeds : 1 000 - 8 000 rpm - spindle inclination (A-axis): -10° up to +27° - setting accuracy 1 min - height adjustment (Y axis) : 130 mm - stroke range (X axis) : 220 mm - oscillation stroke, steplessly adjustable during oscillation : 0-30 mm - oscillation frequency : 30/60 1/min Workhead: - radius setting (Z axis) : 0.01-50 mm - setting accuracy: 0,01 mm - retraction of slide from the grinding to the measuring position : max. 49 mm - cross table, clamping surface : 155 x 205 mm - travel X - Y : each 60 mm - maximum swivelling angle (B axis): 260° - supply voltage : 380 V - weight : 1200 kg Accessories/options: - grinding pressure variable - projector fixed in measuring position - 1 cabinet with accessories - different grinding wheels, flanges - coolant tank Fjdpfevmpabjx Albsgg - documentation Under power in our warehouse.

Condition: used, Year of construction: 1987, Second-hand machine Year of manufacture: 1987 Condition: fully overhauled Features and technical specifications: - Table dimensions 1100 x 760 mm - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height and swivel adjustment via handwheel - Speed settings: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle – 5 to +45° - Milling stop with metal jaws - mounted on a round insert plate and therefore rotatable through 360° Fgsdpfszk Nzijx Albjg - with table extension on both sides, featuring extendable frame supports - with 4-roller feed mechanism Weight approx. 900 kg The images show the machine in its pre-refurbishment condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: good (used), Year of construction: 2019, functionality: fully functional, Design: Tabletop machine - Manual operation via 2-hand start - Ergonomic working with comfortable mushroom-shaped push buttons - Innovative emergency stop on the machine table - Emergency stop lighting visualizes machine status - Machine table 300 x 300 mm - Overhang (to the center of the sonotrode) 197 mm Model: FUSION CONSOLE P 1 Deflection-free machine stand - Patented brackets for maximum parallelism between the sonotrode and the workpiece - Ensures drive tracking for a stable process SERVO DRIVE 1 Fully electric servo drive - Height adjustment completely electric - Freely selectable start position for the shortest cycle time - High speed up to 240 mm/s - Stroke 300 mm with absolute position measurement POWER PACK P 1 High-precision force measurement with force sensor - Force 5 – 1000 N - Fast force control over the entire force range PROCESS MONITORING 1 Welding process control model FUSION - Industrial PC with 17.3" color touchscreen - Welding types: distance relative, distance absolute, energy, time, power - Amplitude, force, or speed profiling with up to 5 steps - Comprehensive quality control with graphical display - Reliable monitoring of welding and process parameters - Easy setting of tolerance limits with setup assistant - Sequence setup for clear configuration of additional functions - 25 user levels with password protection - Productivity overview with piece and shift counters - Recipe management for up to 300 welding parts 1 UPS – uninterruptible power supply - Secure process documentation even in the event of a power outage 1 Standard control cabinet with electrical components and main switch - Dimensions approx. 450 x 600 x 300 mm Fodpozil I Aefx Albogg PRODUCTIVITY 1 Vibrating tool holder, screwed - With indexing of the sonotrode alignment - Ergonomic holder made of aluminum - Easy replacement of the entire vibrating tool 1 Adjustment plate - Size 280 x 280 mm - Easy planar-parallel alignment of the workpiece to the sonotrode - Universal hole pattern for easy fixing of the fixture CONNECTIVITY 4.0 Comprehensive connection options and machine interfaces - Variable interfaces for up to 4 peripherals - USB & LAN connection for easy process data processing - Troubleshooting and assistance via remote service from MS Service Ultrasonic: 20 kHz with 1000 W 1 Digital ultrasonic generator soniGEN 20 /1000 - Frequency 20 kHz - Power 1000 W - Amplitude stabilization - Automatic sonotrode scan - Load compensation 1 Piezoelectric ultrasonic converter soniCON 20 kHz - Protection class IP54 - High-quality HF connector 1 Amplitude transformation piece soniAMP 20 kHz - Ratio 1:1 - Material: Titanium Please refer to the data sheet for technical specifications.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Fixed/Live Center Design MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Grinding wheel guard fully open when door is open Miscellaneous Fgodpfozn U S Iox Albog Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: used, Year of construction: 2008, turning diameter over bed 320 mm turning diameter over slide rest 190 mm turning length 920 mm center height over bed 160 mm turning diameter in the gap 430 mm centre distance 920 mm bed width 181 mm digital readout DPA 2000 3 Achsen Fgodpozzrdbsfx Albeg spindle bore Ø 38 mm turning speed range 10 - 2.500 U/min power requirement 1,5 kW 3-jaw-chuck diameter 160 mm taper in tailstock-quill MK 3 dia. of quill 32 mm quill stroke 100 mm voltage 400 V weight of the machine ca. 410 kg dimensions of the machine ca. 1,60 x 0,70 x 1,55 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 832432 - 3-axis digital display DPA 2000 - Constant cutting speed - Stepless speed control - Digital speed display - RÖHM 3-jaw flat spiral chuck - Face plate Ø 255 mm - Fixed steady rest - Rotating steady rest - Machine light - Rotating center point

Condition: good (used), Year of construction: 2022, functionality: fully functional, 3D Scanner Solutionix D500 Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measuring range: Up to approx. 120 mm Fodpoxvyiuofx Albsgg Volume capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High resolution, no additional color cameras required Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision mechanics, reverse engineering, cultural assets, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: Up to 400 kg Max. table size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: Via vertical clamp or quick-release clamp Mobility: 4 swivel castors with total lock Installation aid: Roller strip for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Fjdsxrk Itjpfx Albjgg Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge.

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Fedpfezz Ru Ejx Albegg Capacity 1100 x 4 mm

Condition: ready for operation (used), DECKEL FP 1 / 3 - Axis Active Digital TNC 113 -CE marking -Travel ranges X / Y / Z: 300x160x340mm -Heidenhain TNC 113 / Linear control -Spindle speed range: 40 - 2000 RPM -Feed rates continuously adjustable in all three axes -Rapid traverse in all three axes -Swiveling vertical head & drilling quill -Vertical & horizontal milling capability -Tool holder: ISO 40 -Drive power: 1.5 / 1.9 KW -Fixed angular table -Chip tray -Coolant system -Work light Fgjdezvcbgspfx Albsg -Documentation Dimensions: L x W x H: 1.3 x 1.2 x 1.8 meters / Weight: 950 kg Errors and omissions excepted.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: CR2313, 1 HOVA SSK Column Swivel Crane NL 120 KG Load capacity at full extension: 120 KG / 0.12 tons Height: approx. 5.15m, upper arm length: approx. 4.45m Reach: approx. 6m, hook height: approx. 4.1m Base plate: 75x75cm Total weight: approx. 400 Kg With 500Kg Hadef chain hoist (2 lifting speeds) Connection: 400V 16A, swivel range: 270° The crane is disassembled and available immediately Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new, see pictures Fsdpfxszgbf Se Albjgg Shipping via freight forwarder or collection by arrangement

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Fedpfxeuddpge Albsgg Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x Fgodpfxovi Enaj Albog with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled Fedpfx Aljuhantobegg - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: good (used), total length: 1,600 mm, total width: 1,200 mm, plate height: 50 mm, Paletti Aluminum Clamping Plate - Dimension 1600 x 1200 x 50mm - Fixing Holes Grid 100x100mm (15x10 Holes) - Steel Insert Ø20mm x M12 fixing thread - 4x transportthreads M16 (for eye bolts) - one damage on one edge and slight cuts on the surface - On demand alumium frame (1000x1000mm) for € 500,-- Fgsdpoynwr Eofx Albog

Condition: used, Year of construction: 2011, color: yellow, loading space volume: 47 m³, loading space width: 2,470 mm, loading space length: 7,410 mm, loading space height: 2,600 mm, first registration: 06/2011, total length: 7,410 mm, driver cabin: day cab, emission class: none, Equipment: cooling unit, truck registration, Vehicle number for inquiries: 41172 Krone, WB 7.45 * Year of manufacture: 2011 * 7.45 * Fixed roof * Portal door * Insulated box body * Reefer body * Complete double deck, incl. supporting beams * Deep-freeze unit * Aluminum floor * Evaporator * Refrigeration unit Thermoking * Diesel + electric * Other * Internal dimensions: L=7410 mm, W=2470 mm, H=2600 mm * Internal volume*: 48 m² * Dimensions of corner fittings E=5853 mm * Dimensions of overhang 799 mm Fgjdpfxozv Dp So Albsg * Pallet spaces: 18 * Refrigeration unit: Thermo King MD 300 * Diesel operating hours: 16007 hours * Electric operating hours: 4378 hours Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Year of construction: 2024, operating hours: 10 h, condition: excellent (used), functionality: fully functional, load capacity: 3,000 kg, machine/vehicle number: 0000, Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum has a load capacity of 3,000 [kg]. Type ATV-Q-3-3x3, brand Tiger Hebezeuge. The crossbeam has been used only a few times and a maximum of 500 kg has been lifted with it. It shows only minimal signs of wear. See photos. Fgjdpfx Alozn Rausbeg Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and shipping costs (approx. €380). Selling because it is no longer needed. Please contact me if you have any questions. Description according to the manufacturer: Aluminum crossbeam with 4 swivel lifting hooks - H-shaped crossbeams made of aluminum. Product features: Type: ATV-Q-3-3x3 Load capacity: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing, cross profile: 400-3,000 [mm] Aluminum load beam for crane operation Lightweight crane crossbeam in H-shape made of aluminum Suspension for single hooks, DIN 15401 With four adjustable safety lifting hooks (rotatable by 360° under load) With a quick-release system to quickly adjust the lifting hooks a) on the main profile in a grid of 50 mm b) on the cross profile in a grid of 50 mm All parts are made of either aluminum or polyamide (with the exception of the bolts and suspension hooks) The two cross profiles can be removed from the main profile Surface: plain Product description: Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum. This aluminum crossbeam in H-shape consists of a main beam and 2 cross beams. The crane crossbeam can not only be adjusted in many ways but also easily disassembled. This simplifies transport and saves space if the crossbeam is not needed. The load-bearing devices have a type plate with manufacturer, load capacity, weight and type number, as well as a QR code with access to the EC declaration of conformity. Safety note: Note on the safe storage of crossbeams According to DGUV rule 109-017, chapter 7.5, load-bearing devices must be placed or laid down in such a way that they cannot tip over, fall or slide off.

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop Fedpfx Aox E Tmbslbjgg • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa