Used Pistol Screwdriver for sale (189)

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Ppedoym Ih Uepfx Aaheu

Condition: used, mileage: 40,280 km, power: 220 kW (299.12 HP), first registration: 12/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2025, color: silver, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 39 m³, loading space length: 6,440 mm, loading space width: 2,441 mm, loading space height: 2,500 mm, Equipment: air conditioning, navigation system, 1. Cab & Interior * ClassicSpace cab, 2.30 m wide, 320 mm engine tunnel * Comfort cab suspension, steel-sprung * Comfort air-suspended driver's seat * Functional passenger seat * Velour seat covers (driver + passenger + center seat) * Side sun blind (driver's side) * Rubber floor mats for driver/passenger * Storage compartment lids, driver/passenger side * Low storage tray on engine tunnel * Roof hatch / ventilation flap * Interior color: Greige/Anthracite * Cab rear wall without window * External storage hatch left * A-pillar trim * Central locking with comfort closing system ----2. Engine & Drive * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Euro VI, Step E * High Performance Engine Brake * Front air intake * Two-stage, consumption-optimized air compressor * Transmission G211-12 PowerShift 3 / PowerShift Advanced * Single-disc clutch * Axle ratio i = 3.077 ----3. Chassis & Axles * Front axle 8.0 t, air-suspended * Rear axle 13.0 t, hypoid crown wheel 440 * Steering system, single circuit, direct * Non-regulated power steering pump * Power steering oil cooling ----4. Brakes & Safety * Disc brakes FA + RA * Electronic Braking System (EBS) with ABS & ASR * Electronic parking brake * Electronic Stability Program (ESP) * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Speed limiter 90 km/h * Cruise control ----5. Electrical & Electronics * Batteries 2× 12V / 220Ah * Hella battery sensor * Alternator 28V / 100A * Circuit breakers * 12V & 24V sockets in passenger footwell * Additional functions for bodywork * Switches for external body electrics (No. 1 & No. 2) * Remote cable control for air suspension * Navigation system * Interactive multimedia cockpit * 2-way speaker system * Truck Data Center 7 * FleetBoard, Truck App Portal, toll recording * Axle load measurement system * Remote Online ----6. Lighting & Visibility * LED daytime running lights * Automatic main/dipped beam and cornering light * Halogen fog lamps * LED indicators in light signature * Flashing side marker lights * 2 LED work lights at bottom (right/left) * Tinted windscreen * Main mirror with maneuvering position (passenger side) * Heated front mirror * External transparent sun visor * Air horn ----7. Tanks & Exhaust System * Main tank 290 l aluminum, left Ppsdpfx Aoyl Hatjahou * AdBlue tank 60 l, left * Exhaust system right, tailpipe facing inside ----8. Frame & Body * High-strength frame, U-profile, perforated grid 50×50 mm * Frame overhang 2100 mm * Mounting parts for flatbed * Bolted frame * Rear underride guard (ECE) * Front underride guard (ECE), aluminum * Rear axle mudguard 2500 mm * 3-piece mudguard with EC spray protection * Front spray protection * Compressed air pistol with hose * Wheel chock + holder ----9. Trailer & Coupling * 2-line trailer brake * Rockinger D40 trailer coupling * Upper hand lever for coupling * 24V, 15-pin trailer socket ----10. Other Features & Codes * Predictive Powertrain Control * Economy/Power driving modes ----11. 1st Floor Finkl Livestock Body * Fan * Ventilation flaps * Feed flap * 1 large livestock partition * Storage boxes * Dimensions inside (LxWxH): 6440 x 2441 x 2500 mm * Loading volume: 39 m³ ----- * Tyre size FA: 315/70R22.5 * Tyre size RA: 315/70R22.5 * Fuel tank: 290 ltr. * AdBlue tank: 60 ltr. * Technical gross weight: 20500 kg * Unladen weight: 8836 kg * Permissible trailer load: 16600 kg * Total length: 8700 mm * Wheelbase: 4900 mm * SP due: expired ----Vehicle number: 8359---- Errors and prior sa

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Pjdpotuzqpjfx Aahopu Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Fifth wheel height: 1,150 mm. Hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male screw pressure line, 1'' female screw return line. BPW On Road Eco Air axles, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, fully enclosed side underrun protection painted RAL 9005 black. Two LED work lights behind the third axle and in front of the support legs, one LED work light inside. Steel wheels with black wheel hubs, 6 kg fire extinguisher, 3-metre ladder, radio remote control for floor functions, bracket for shovel and broom, two toolboxes mounted on the overhang, 15-metre air hose with hydraulic reel and pistol, self-supporting chassis 4,400 mm, aluminium body 3/2 mm. Catwalk at front wall with two ladders, door in front wall left with ladder, 10 mm floor type, aluminium movable side wall with tarpaulin (3,800 g) and rail sweeper, rear doors each with two integrated 18 mm locking rods, reinforced door sealing, rear upper cross member unlockable on right side by pin, pneumatic door unlocking, roof roll tarpaulin, black (650 g), with side reinforcement (200 g over 600 mm), twelve pairs of lashing rings, wear plates on rear side walls (3 x 1.5 m), black integrated lashing straps in side wall with stainless steel ratchets, left side protection tarpaulin RAL7038. Ppedpfx Aajyw Dxxjhju

Condition: used, mileage: 94,000 km, power: 375 kW (509.86 HP), first registration: 10/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, wheelbase: 4,600 mm, color: orange, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, compressor, differential lock, electronic stability program (ESP), fog lights, navigation system, parking heater, soot filter, traction control, Double cab, central lubrication system, EBS, single owner, green emissions badge (category 4), reversing camera, electric windows, radio/CD, electrically adjustable exterior mirrors, speed limiter, adaptive cruise control, new general inspection / emissions test, diesel automatic, climate control, Euro 6, L package, green emissions badge 4, axles: 4, wheelbase: 460 cm, drivetrain configuration: 8x4 Tridem, last axle liftable and steerable, long-distance driver’s cab, large FMX cab with air conditioning, camera, differential lock, hydraulic system, tipper hydraulics, ABS, adaptive cruise control, EBS, ESP, compressor, navigation system, 2 remote controls, retarder/interder, auxiliary heating, aluminium fuel tank, brake booster, double fuel tank, electric windows, electrically adjustable exterior mirrors, speed limiter, fridge, air suspension, air horn, fog lights, particulate filter, radio/CD, rear view camera, sun visor, spoiler, toolbox, PTO (power take-off), centralized lubrication, central locking. Ppedpsvic A Ujfx Aahju MTS Dino 5 suction excavator Type 4A14 T 36,000 V, dual turbine Powerboom with rotary head, central lubrication, extra high-pressure pump unit with hoses and pistol, extra air valves at the rear of the truck for operating pneumatic tools such as a hammer, compressor hours: 3,790, fan hours: 3,512, MTS serviced, Volvo service book, garage vehicle, single owner, major overhaul for €31,000. Permissible gross weight: 32,000 kg. FOR US, CONDITION AND OUR GUT FEELING ARE DECISIVE – PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the following number. *TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE!* All information provided without guarantee. More offers can be found on our homepage. The description and stated data do not constitute a guarantee and are not binding. The binding agreement is the purchase contract concluded at the dealership when purchasing the vehicle. Subject to errors and prior sale.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. Psdpfxszb Rbts Aahopu - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive Podpexwva Eefx Aahspu An inspection can be arranged at any time by appointment.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Additional options & accessories: - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Weight & dimensions: Podpfey E N Dcjx Aahopu 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH)

Condition: new, Year of construction: 2026, We always have a large selection of tipper trailers! For the construction industry, gardening and landscaping, agriculture, trades, and private customers. Three-way tippers and rear-tipping trailers in various sizes and weight classes. * Single-axle or tandem-axle (2 axles) * Permissible total weight from 1500 kg to 3,500 kg * Many vehicles available immediately * Customized designs and special orders according to customer requirements * Financing available upon request If desired, we can build your trailer with customized features: * Manual hydraulic system * Electric hydraulic system * Battery-powered screwdriver hydraulic system * Side panel extensions * Various side panel designs * Leaf grate attachments or sheet metal attachments * Ramps, supports, and other accessories as desired Competent advice, fair prices, and fast availability. Many models are available immediately from stock – other versions can be delivered in the short term. Ppsdpozbwzmjfx Aahsu Call us or stop by! Together, we will find the right tipper for your needs. Inspection and consultation are also possible on Saturdays. Please call us in advance so that we can schedule enough time for you.

Condition: excellent (used), ///// PRICE LISTED FOR 1 UNIT ///// For sale: Professional Bosch Rexroth industrial screwdrivers designed for use in production lines and assembly workstations. The devices are characterized by high precision, durability, and the ability for continuous operation in industrial environments (automotive, series production). The items are used. They show normal signs of use but are in good technical condition. ⚙️ Available models (choose one) Pjdpfsyzkhuox Aahspu 🔹 Rexroth ESA075G-G (0 608 841 230) Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G (0 608 841 247) Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G (0 608 841 212) Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G (0 608 841 225) Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common specifications Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Scope of supply ✔️ 1x screwdriver (selected model) ✔️ Head (as per photo – straight or angled) 📊 Condition Used – normal signs of wear. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry series production precision tightening

Condition: new, empty load weight: 475 kg, maximum load weight: 1,025 kg, overall weight: 1,500 kg, axle configuration: 1 axle, total length: 4,130 mm, total width: 1,640 mm, total height: 980 mm, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 300 mm, Year of construction: 2026, Humbaur rear-tipping trailer HUK 152715 with Flex-E pump, which enables easier tipping using a cordless screwdriver. Our price: €3,950 including delivery, 19% VAT, 6.4% transfer fee, and vehicle documents! Description: Compact dimensions, high-quality materials – the HUK always makes a good impression in everyday use. Its special quality feature: the trailer has a robust outer frame and an internally mounted platform sheet. Where else can you find that in this class? Technical data: Trailer type: single-axle Construction type: aluminum Rear-tipping trailer 45° Weight: 475 kg Gross vehicle weight: 1500 kg Payload: 1025 kg Internal length: 2,680 mm Overall length: 4,130 mm Internal width: 1,500 mm Overall width: 1,640 mm Internal height: 300 mm Overall height: 980 mm Loading height: 670 mm Tire size: 13 inches Equipment: Chassis and tipping platform welded and hot-dip galvanized V-groove outer frame with recessed lashing eyes, tensile force 400 kg per tie-down ring Galvanized platform floor (3 mm) Side panels 300 mm, foldable all around Tow bar locks Tapered corner posts Ppodpfx Aaszbkx Sjhsu Automatic jockey wheel Lighting protected in the under-ride guard 3-stage telescopic cylinder Double-acting hand pump 13-pin plug

Condition: new, empty load weight: 556 kg, maximum load weight: 2,160 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 900 mm, total length: 4,160 mm, total width: 1,640 mm, total height: 1,560 mm, Year of construction: 2026, Humbaur rear tipper HUK 272715 with 60 cm mesh extension and Flex-E pump, which simplifies tilting with a cordless screwdriver. Our price: €5,650 incl. 19% VAT, 6.4% delivery surcharge, and vehicle documents! Description: The HUK rear tippers are available as single-axle or tandem-axle models. These trailers are particularly distinguished by the galvanized deck with V-groove outer frame and recessed lashing eyes. The tilting angle is 45 degrees. All models can be equipped with an electric pump and a mesh extension or aluminum side walls. Technical data: Ppodszbkhtepfx Aaheu Trailer type: Twin-axle Construction type: Aluminum Rear tipper 45° Weight: 556 kg Total weight: 2,700 kg Payload: 2,160 kg Internal length: 2,680 mm Overall length: 4,160 mm Internal width: 1,500 mm Overall width: 1,640 mm Internal height: 300 mm (with mesh extension: 900 mm) Overall height: 950 mm (with mesh extension: 1,560 mm) Loading height: 670 mm Tires: 13 inches Equipment: Chassis and tipping platform welded and hot-dip galvanized Galvanized deck with V-groove outer frame and recessed lashing eyes, tensile force 400 kg per lashing ring Galvanized deck floor (3 mm) Folding side panels 300 mm all around Tow bar locks Conical corner posts Automatic support wheel Lights protected in underrun protection 3-stage telescopic cylinder Double-acting hand pump

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Ppodpoy S Dwwofx Aahou Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Ppedjuzn Nnopfx Aaheu Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 2020, 2 units available! Rear-mounted shelving system with 4 shelves, 650x300 mm, and 4 support arms for long parts. Perforated back panel. Workplace lighting. Height adjustment system via handwheel (fine adjustment in 5 mm increments per revolution). Pneumatic clamping device for clamping individual profiles for hardware assembly, 180° swiveling, with locking in 30° increments, locking pneumatically actuated. Clamping position adjustable in the longitudinal direction of the profile. Ppjdpfozab Smsx Aaheu Clamping range for profiles with a construction depth of 45-120 mm and a working width of 50-150 mm, each adjustable in 7 mm increments. 4 pneumatic connections, 5 electrical connections, 2 holders for hand drills or screwdrivers, etc., mounted on a sliding tool drawer. Drawer extends across half the table width on the right.

Condition: new, Year of construction: 2024, functionality: fully functional, niverzálny pneumatický stôl PT-2800 sa vyznačuje nastaviteľnou pracovnou doskou, pneumatickým upínaním podporných prvkov (bloky alebo nosníky) a pneumatickým zdvihom palety smerom k operátorovi. Je nastaviteľný, poloautomatický stôl na pribíjanie paliet pre palety rôznych veľkostí. Jeho ergonomická konštrukcia umožňuje rýchle a jednoduché nastavenie veľkosti šablóny palety. Dĺžky sa môžu líšiť 900 – 2800 mm a stôl podporuje šírky maximálne do 1500 mm. Len jeden operátor je potrebný na výrobu 180 – 210 paliet počas jednej 8-hodinovej pracovnej zmeny. Operátor používa viacero nastreľovacích pištolí pre rôzne veľkosti klincov. Každá z nastreľovacích pištolí je pre pohodlie operátora zavesená na hornej valčekovej dráhe. Valčeková dráha umožňuje voľný pohyb nastreľovacích pištolí pozdĺž montážneho systému koľajníc nad hlavou. Konštrukcia stola zaručuje efektivitu výroby ako aj komfort obsluhy. Technické špecifikácie: Hmotnosť: 530 kg Prevádzkový tlak: do 8 bar Materiál: konštrukčná oceľ Rozmery paliet: Dĺžka: 900 – 2800 mm Šírka: 1500 mm Vonkajšie rozmery: Šírka pracovnej dosky: 3210 mm Šírka stola vrátane koľajnicového montážneho systému pre balancery: 4082 mm Výška pracovnej dosky: 1829 mm Výška stola vrátane koľajnicového montážneho systému pre balancery: 2697 mm Výhody: Jednoduché použitie – Jeden operátor dokáže postaviť 180 – 210 paliet za 8 hodín Kompaktný dizajn – Celková plocha 4,94 m² Univerzálna nastaviteľná pracovná doska umožňuje výrobu: Blokové palety (vrátane EUR paliet) do 15 blokov Palety na 2, 3, 4 alebo 5 koľajniciach Efektivita – Rýchlo prepnite na paletu akejkoľvek veľkosti Ppsdpfoqwnv Nex Aahju Pneumatická svorka – Ľahko vycentruje bloky Pneumatický zdvih – Zdvíha paletu, aby sa minimalizovalo zdvíhanie operátora Horná valčeková dráha – Nastreľovacie pištole sa môžu počas práce voľne pohybovať Spodná šablóna – Šablóna na zostavenie nožičiek palety Nastaviteľné oceľové klinčovacie platne – Pozinkované a kalené oceľové platne na klincovacie klince Jedinečnosť: Nastavenie diagonálneho stola znižuje prácu o 50 % Možnosť zostavenia paliet CP1, CP2, CP3, CP4, CP5 Na nastavenie stola sú potrebné iba 2 imbusové kľúče

Condition: new, Year of construction: 2024, total width: 13,910 mm, total height: 25,810 mm, total length: 31,220 mm, compressed air connection: 8 bar, warranty duration: 1 months, overall weight: 440 kg, working width: 1,900 mm, working height: 1,300 mm, Univerzálny pneumatický stôl PT-1900 sa vyznačuje nastaviteľnou pracovnou doskou, pneumatickým upínaním podporných prvkov (bloky alebo nosníky) a pneumatickým zdvihom palety smerom k operátorovi. Je nastaviteľný, poloautomatický stôl na pribíjanie paliet pre palety rôznych veľkostí. Jeho ergonomická konštrukcia umožňuje rýchle a jednoduché nastavenie veľkosti šablóny palety. Dĺžky sa môžu líšiť 800 – 1900 mm a stôl podporuje šírky maximálne do 1300 mm. Len jeden operátor je potrebný na výrobu 210 – 230 paliet počas jednej 8-hodinovej pracovnej zmeny. Operátor používa viacero nastreľovacích pištolí pre rôzne veľkosti klincov. Každá z nastreľovacích pištolí je pre pohodlie operátora zavesená na hornej valčekovej dráhe. Valčeková dráha umožňuje voľný pohyb nastreľovacích pištolí pozdĺž montážneho systému koľajníc nad hlavou. Konštrukcia stola zaručuje efektivitu výroby ako aj komfort obsluhy. Technické špecifikácie: Hmotnosť: 440 kg Prevádzkový tlak: do 8 bar Materiál: konštrukčná oceľ Rozmery paliet: Dĺžka: 800 – 1900 mm Šírka: 1300 mm Vonkajšie rozmery: Šírka pracovnej dosky: 2250 mm Šírka stola vrátane koľajnicového montážneho systému pre balancery: 3122 mm Výška pracovnej dosky: 1627 mm Výška stola vrátane koľajnicového montážneho systému pre balancery: 2581 mm Výhody: Jednoduché použitie – Jeden operátor dokáže postaviť 210 – 230 paliet za 8 hodín Kompaktný dizajn – Celková plocha 3,3 m² Univerzálna nastaviteľná pracovná doska umožňuje výrobu: Ppjdpfx Ajqcvvgjaheu Blokové palety (vrátane EUR paliet) do 9 blokov Palety na 2, 3, 4 alebo 5 koľajniciach Efektivita – Rýchlo prepnite na paletu akejkoľvek veľkosti Pneumatická svorka – Ľahko vycentruje bloky Pneumatický zdvih – Zdvíha paletu, aby sa minimalizovalo zdvíhanie operátora Horná valčeková dráha – Nastreľovacie pištole sa môžu počas práce voľne pohybovať Spodná šablóna – Šablóna na zostavenie nožičiek palety Nastaviteľné oceľové klinčovacie platne – Pozinkované a kalené oceľové platne na klincovacie klince Jedinečnosť: Nastavenie diagonálneho stola znižuje prácu o 50 % Možnosť zostavenia paliet CP1, CP2, CP3, CP4, CP5 Na nastavenie stola sú potrebné iba 2 imbusové kľúče

Condition: new, Year of construction: 2023, Popis Univerzálny pneumatický stôl PT-3300 sa vyznačuje nastaviteľnou pracovnou doskou, pneumatickým upínaním podporných prvkov (bloky alebo nosníky) a pneumatickým zdvihom palety smerom k operátorovi. Je nastaviteľný, poloautomatický stôl na pribíjanie paliet pre palety rôznych veľkostí. Jeho ergonomická konštrukcia umožňuje rýchle a jednoduché nastavenie veľkosti šablóny palety. Dĺžky sa môžu líšiť 900 – 3300 mm a stôl podporuje šírky maximálne do 1500 mm. Len jeden operátor je potrebný na výrobu 170 – 200 paliet počas jednej 8-hodinovej pracovnej zmeny. Operátor používa viacero nastreľovacích pištolí pre rôzne veľkosti klincov. Každá z nastreľovacích pištolí je pre pohodlie operátora zavesená na hornej valčekovej dráhe. Valčeková dráha umožňuje voľný pohyb nastreľovacích pištolí pozdĺž montážneho systému koľajníc nad hlavou. Konštrukcia stola zaručuje efektivitu výroby ako aj komfort obsluhy. Technické špecifikácie: Ppedpfx Aeqwnxgsahju Hmotnosť: 620 kg Prevádzkový tlak: do 8 bar Materiál: konštrukčná oceľ Rozmery paliet: Dĺžka: 900 – 3300 mm Šírka: 1500 mm Vonkajšie rozmery: Šírka pracovnej dosky: 3710 mm Šírka stola vrátane koľajnicového montážneho systému pre balancery: 4582 mm Výška pracovnej dosky: 1829 mm Výška stola vrátane koľajnicového montážneho systému pre balancery: 2697 mm Výhody: Jednoduché použitie – Jeden operátor dokáže postaviť 170 – 200 paliet za 8 hodín Kompaktný dizajn – Celková plocha 5,37 m² Univerzálna nastaviteľná pracovná doska umožňuje výrobu: Blokové palety (vrátane EUR paliet) do 15 blokov Palety na 2, 3, 4 alebo 5 koľajniciach Efektivita – Rýchlo prepnite na paletu akejkoľvek veľkosti Pneumatická svorka – Ľahko vycentruje bloky Pneumatický zdvih – Zdvíha paletu, aby sa minimalizovalo zdvíhanie operátora Horná valčeková dráha – Nastreľovacie pištole sa môžu počas práce voľne pohybovať Spodná šablóna – Šablóna na zostavenie nožičiek palety Nastaviteľné oceľové klinčovacie platne – Pozinkované a kalené oceľové platne na klincovacie klince Jedinečnosť: Nastavenie diagonálneho stola znižuje prácu o 50 % Možnosť zostavenia paliet CP1, CP2, CP3, CP4, CP5 Na nastavenie stola sú potrebné iba 2 imbusové kľúče

Condition: excellent (used), Slate shears TS NS1 in case - Attachments for cordless screwdriver - As new Ppjdpfxoy Sayzs Aahju

Condition: excellent (used), GSR 6-45 TE drywall screwdriver - with MA 5 magazine attachment - year of manufacture 2015 - used Ppodey Sah Eopfx Aahou

Condition: good (used), Year of construction: 2022, machine/vehicle number: 25666, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Pedpfx Aasy Tybzehspu Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg Pjdpfx Aoy Tybnjahspu

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate Psdpfx Aoflq Spsahopu The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, The new price of the machine was €950,000! TECHNICAL DETAILS Milling heads / Motor output Speed: 2,800 rpm Motor output, small milling head: 0.27 kW Frequency, small milling head: 300 Hz Speed, small milling head: 18,000 rpm Motor output, large milling head: 1.1 kW Frequency, large milling head: 200 Hz Speed, large milling head: 12,000 rpm Tool data / Milling head data Collet diameter, small milling head: max. 8 mm Milling head diameter, small milling head: max. 8 mm Collet diameter, large milling head: max. 10 mm Milling head diameter, large milling head: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Pedpfx Aajy Syuxehopu Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile guides Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Ppsdpfx Aaoy H Rfqshou Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition