Used Perkins Combined for sale (4,446)

Condition: used, Year of construction: 1988, Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Nwjdpfx Ajz Ek Tmef Sol Base construction: short supporting skirt Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: used, Combined disc + vertical belt sander Disc diameter: 600 mm Nwedpfx Aelagdwjf Sol Encumbrance: 110 x 80 cm, height 160

Condition: new, Year of construction: 2024, Combined Exposure Unit, Model 4, 120x145, 3.5kW Max. screen size: 120x145cm, floor space: approx. 250x 190cm, MH quick-start lamp: 3.5kW, connection: 400V/50cycles, CEE-plug, 32ampere. consisting of steel-tube support with storage board, with 4retractable drawers, with pull-out rails for various sizes of screens, vacuum copying frame with flexible rubber blanket on top, easier lifting of the glass upper frame by gas springs, height-adjustable cross-beam on top with hanging MH exposure lamp model AKTICOP S as well as UV-protection curtain, with light dosing device model AKTITRON S16E, 16programs, equipped with light sensor at the copying frame. Control board at the drying cabinet with vacuum gauge, vacuum reducing valve, operating and control elements. Nsdpfeh Tym Isx Af Sowl

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago Nedovcm Nfopfx Af Sewl - Additional oil cooler – 3 years old - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 - Complete engine overhaul in 2017 Offer is made without guarantee of availability.

Condition: used, Year of construction: 2022, front tire size: 800/65 R32, rear tire size: 540/65 R24,

Condition: new, Year of construction: 2025, Our C300 5-job combines feature a sturdy folded and electro-welded steel plate frame. Significantly thick cast iron platens are carefully ground and milled, and all material used is certified to ensure the highest quality. They mount three self-braking motors, each individually protected, with the ability to adjust power from 3 hp to 4 hp according to the required specifications. The carriage, made of milled and anodized aluminum with significant thickness, can vary in length depending on the model or specific requirements. It runs on steel balls on a track also made of steel and is adjustable for optimum smoothness. Standard equipment includes a 1600 mm carriage, while optional 2200 mm carriages are available. The C300 is an ideal choice for the hobbyist and is indispensable for the restorer. Built to above-average standards in its class, it maintains a price-performance ratio that makes it truly competitive in the marketplace. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Work surface mm 300×1500 Knife-holder shaft diameter mm 70 Shaft rotation speed g/m 5700 Number of knives no. 3 Knives dimensions mm 300x25x3 Max platen registration mm 4 THICKNESS PLANER Work surface mm 300×660 Max pass thickness mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Wood passage min mm 4 Shaft rotation rpm 5700 CIRCULAR SAW Worktable mm 220×1000 Rotational speed g/mm 4500 Blade Ǿ 250 Blade hole Ǿ 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0° 45° Max pass between blade and guide mm 560/700 Engraver Ǿ 90 Scoring hole Ǿ 22 Rotational speed rpm 7000 CAVING MACHINE Work table mm 500×250 Longitudinal stroke mm 205 Transverse stroke mm 95 Vertical stroke mm 90 Spindle Ǿ 16 Spindle rotation rpm 5700 VERTICAL MILLING MACHINE Worktable mm 220×1000 Rotation speed rpm 2000/3100/4400/ 7000 Standard spindle diameter mm 30/35/50 Shaft length mm 105 Vertical shaft stroke mm 115 Max tool diameter mm 160 Max tenon depth mm 55 STANDARD EQUIPMENT Counter frame, flag support mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 Nwedpfx Afouzxh Ij Ssl ACCESSORIES ON REQUEST Single-phase motor KW/HP 4.0/3.0 Sliding carriage mm 2200×315 LIST PRICE EXCLUDING VAT

Condition: new, Description: Planer Surface planer with TERSA quick-change planing knife system With TERSA cutterblock for changing planing knives in seconds TERSA planer blade system enables particularly quiet running Helically toothed steel infeed roller for constant and even wood infeed The particularly long, one-piece planer tables enable easy planing of the workpieces Large planing fence can remain in position when the planing tables are opened Dressing tables open to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Special equipment features Work tables are made of gray cast iron, annealed and stress-free, making them robust and permanently flat Table lips for quiet running Equipment details TERSA planer cutterblock No more adjusting and screwing Planer blade change in seconds Self-locking Particularly quiet Perfect planing result Suction hose connection The extraction nozzles of the jointer and thicknesser point in the same direction. The hose is connected from one side only. No hose is required to reach around the machine. Drive Sturdy chain drive Steel drive wheels Solid cast iron bearing block Planing unit Solid kickback guards prevent workpieces from kicking back 3-blade TERSA shaft ensures an optimum planing pattern The material infeed Helical-toothed steel feed rollers for constant and even material feed without marks Several teeth engage simultaneously for powerful feed Wear-free in contrast to rubber feed rollers Technical data Jointer total table length 1510 mm Jointer working width 300 mm Jointer chip removal max. 4 mm Thicknessing dimensions thicknessing table 565 x 300 mm Thick working height min. 3 mm Thick working height max. 230 mm Thicknessing feed speeds 7 m/min Planer shaft speed 5200 min-1 Planer shaft diameter 72 mm Number of planing knives 3 pcs. Electrical connection 400 V Motor power 4.0 kW Suction nozzle diameter 2 x 120 mm Weight 270 kg Optional slot drilling device Table size 470 x 220 mm Optional slotted hole drilling device transverse/longitudinal stroke 160 mm / 110 mm Optional slot drilling device vertical stroke 120 mm Scope of delivery & equipment Nwodpfx Afju Diwlo Sol TERSA planer cutterblock Anodized aluminium planing fence

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Nwsdpeytg Rbjfx Af Sol Availability: Immediately

Condition: good (used), Year of construction: 1998, operating hours: 7,998 h, load capacity: 3,200 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, Hyster H3.20XML Triplo 460 Freelift / Sideshift Perkins Diesel 1998 Video available via WhatsApp. Ongoing stock; see our website. Prices ex Nuland. Nsdpeynh Aujfx Af Sowl Van de Wert Trading B.V. maintains a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices, sold AS-IS with no warranties. (see our terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Circular saw unit Surface planer Thickness planer Milling unit Further technical data Nwsdoyyltispfx Af Ssl Maximum thickness planing height: 230 mm

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Nwedpfx Afjw Hckrs Sel Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Njdpfexhfc Rsx Af Sjwl Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Year of construction: 2024, condition: like new (used), PerkinElmer Chemagic 360-D Nucleic Acid Extraction System The PerkinElmer Chemagic 360-D is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers various rod heads (magnetic rod heads) for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 ml to 10 ml. 24-Rod Head: For sample volumes from 200 µl to 4 ml. 96-Rod Head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a wide range of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy protocol setup, process status tracking (runtime, remaining time), and the generation of LIMS-compatible protocol files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available for quick and accurate reagent pre-filling, thus reducing manual labor. Dimensions: The device measures 800 x 800 x 900 mm (L/W/H). Certification: The 360-D version is a CE-IVD registered and FDA-listed instrument intended for in vitro diagnostic use (in combination with the appropriate kits). ``` The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pretreatment of primary samples is required before extraction • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS Nedpfx Aoyk Upmjf Sowl • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact table design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with display attached and door open) Depth: 820 mm (1000 mm with door open) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360-D Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1997, condition: used, Twin-track saw/combination BASTON/VOBAU Year of manufacture 1997 Model GB 1070 A Nsdpfxsyl I Eko Af Sewl Tracks in very good condition Very robust trigger

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming knives. A good entry-level machine with extensive equipment. A video of the machine in operation can be sent upon request. Nodpfxezn Afpe Af Sewl Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100 mm, 4x80 mm, including the shown ducting to 200 mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feeding for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming knife R2, manually adjustable Glue joint trimming knife with large roller, pneumatically controlled Hood locking CE mark Operating manual as a folder All indexable inserts of the milling units and the trimming knives have been renewed or re-sharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping milling unit has not been renewed, but is still sharp. Original paint, only a few spots retouched. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight: approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring Nsdpfxoz Ay Rre Af Sewl ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision Nwjdpfoyrty Hsx Af Ssl threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port Nwodpfx Aey T R Tbjf Sjl 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phase motor - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: None - Horizontal p...

Condition: new, Number of sanding units 1 st. sanding width 150 mm Sanding height max. 150 mm Loewer edge finishing machine MiniSpin N ----- Machines for finishing and fine sanding of Nodpjxmk Ayjfx Af Sswl Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,000 h, clamping force: 2,100 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2009. This SUMITOMO SHI DEMAG Systec 210/580-1450 features a clamping force of 210 t and a screw diameter of 50 mm. It offers a maximum specific injection pressure of 2426 bar and a maximum swept volume of 530 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 210/580-1450 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2426 bar- Max. Swept Volume: 530 cm³- Mold Height (Min/Max): 340 mm / 790 mm- Tie-Bar Distance: 580 x 580 mm- Centering Ring Diameter (Ejector/Nozzle): 160 mm / 160 mm- Operating Hours: 13,000 hrs (Drives)- Core Pull: 1 circuit- Pump Drive Power: 30.0 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Feed Zone Cooling: Regulated temperature- Hydraulic Screw Drive: Motor I (high speed)- Nozzle Specifications: Open nozzle M24x1.5, Radius 38.0 mm, Bore 3.0 mm- Water Connection: 8-fold cooling water flow regulator with temperature display (max 10 l/min per circuit), separate connections for mold and machine cooling- Socket Combination: Integrated, 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A Nedjz Er Dtopfx Af Sewl

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Nwodozx Nybjpfx Af Sol Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: used, Year of construction: 2014, machine/vehicle number: LC675, Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling through the packaging process.Production Line Integration CapabilitiesThis complete canning line combines essential process stages for beer canning, from depalletizing empty cans through atmospheric filling, labeling and coding. It can be integrated with upstream beer-processing equipment and downstream secondary packaging machinery through suitable conveying and line-control arrangements.Machine typeManufacturer / modelYearDepalletizerCan depalletizer/elevatorFilling MonoblockCask Brewing Systems atmospheric filler2014Labeling MachineS2S Labelling Machines S2/ZPrinterLinx inkjet coderThe 0.33L can format makes this equipment suitable for producers requiring a compact beverage production solution for standard beer cans. The modular arrangement also supports practical connection to can conveyors, accumulation sections and downstream industrial packaging operations.Machine Condition & Maintenance HistoryThe line is used and fully reconditioned, providing a prepared second hand canning solution for operation. Its reconditioned condition is particularly relevant for buyers seeking established beverage production equipment with the core filling, labeling and coding functions supplied as one line.Operational Performance & VersatilityThe atmospheric filler is intended for beer in cans and is specifically identified as a non-counter-pressure filling system. The line incorporates an empty-can depalletizer/elevator, a Cask Brewing Systems filler, a Linx inkjet coder and an S2S Labelling... Nwsdpfxsz E Dhko Af Sjl

Condition: used, Year of construction: 2002, machine/vehicle number: M353, Used Linker 36-36-12 filling monoblockTechnical Specifications & Performance DataThe Linker 36-36-12 filling and capping monoblock is an industrial packaging machine designed for volumetric filling and plastic screw-cap application. Manufactured in 2002, this unit combines filling and capping functions in one compact bottling equipment platform for efficient beverage production and low-viscosity liquid handling.Production speed: 140 units/min based on 500 cc presentations (8.400 units/hour based on 500ml) Filling valves: 36Capping heads: 12Compatible formats: 0.25L to 1.0L, with format changeovers for additional presentationsContainer handling: PET, PP and HDPE containers with plastic capsDimensions: 6000 mm length, 6000 mm width and 3600 mm heightWeight: 3500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen-Bradley MicroLogix 1500 PLC and an Allen-Bradley PanelView Plus 600 HMI. Control panels, instrumentation and operator-interface components support coordinated operation of the filling and capping stations. Fixed filling nozzles and a volumetric precision filling system provide a consistent process arrangement for the configured product range.The electrical supply requirement is 460 V AC, 3-phase, at 60 Hz, with stated power consumption of 6.4 kVA.Production Line Integration CapabilitiesThis Filling and Capping Monoblock can operate as the core process machine within a used bottling line, positioned after container supply and rinsing operations and before downstream labeling, inspection and secondary packaging machinery. It includes a PACE 5286 bottle feeder/organizer to support orderly container infeed.Its format range and changeover capability make the machine suitable for production environments handling multiple 0.25L to 1.0L container presentations. Compatibility with CIP cleaning systems supports integration into industrial packaging installations where hygienic product-contact cleaning procedures are required.Machine Condition & Maintenance HistoryThe machine is in production. Manuals, maintenance documentation and P&ID documentation are available, supporting technical review, installation planning and ongoing maintenance activities. The machine is configured as a second hand filling monoblock with documented controls, instrumentation and operating equipment.Operational Performance & VersatilityThe Linker monoblock is configured for edible vegetable oil and is also compatible with water, juice, CSD, vinegar and other low-viscosity liquid products. Its 36-valve volumetric filler uses fixed nozzles, while the integrated 12-head capper applies 28 mm plastic screw caps.The machine has aseptic capability and is designed for PET, PP and HDPE container handling. This flexibility supports beverage production and food-liquid packaging applications requiring filling and closure operations in a single machine platform.Installation Requirements & Site PreparationInstallation planning should allow for the machine footprint of 6000 mm by 6000 mm and an overall height of 3600 mm, as well as access space for operat... Nwsdpfx Aoz E Dggof Sol

Condition: used, Year of construction: 2006, machine/vehicle number: LC672, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThe Vitone V5 is a used oil decanter system designed for separation duties within an olive oil processing operation. The system is configured around a decanter unit with a stated processing capacity of 50 q/h. It includes a 90 ql malaxer, an electrical control panel and an Alfa Laval separator, creating a coordinated processing package for oil production.Manufacturer: VitoneModel: V5Year: 2006Processing capacity: 50 q/hIncluded malaxer capacity: 90 qlIncluded equipment: electrical control panel, Alfa Laval separator and malaxerAdvanced Automation & Control SystemsAn electrical control panel is included with the decanter system to support operation and coordination of the processing equipment. The decanter assembly incorporates mechanically driven separation equipment, while the supplied control panel provides the basis for integrating the system into an oil extraction process. Control, motor and electrical specifications should be assessed during installation and recommissioning.Production Line Integration CapabilitiesThis oil-processing package is suited to the extraction and separation stages of an olive oil production plant. The malaxer prepares the olive paste before decanting, while the Alfa Laval separator supports downstream clarification and phase separation. The system does not handle containers or packaging formats directly; it is intended for process integration before bottling, labeling, capping and other industrial packaging operations.Machine typeManufacturer / modelYearMalaxerNot statedDecanterVitone V52006Centrifugal SeparatorAlfa LavalMachine Condition & Maintenance HistoryThis second hand oil decanter system is already dismantled and in storage. Its disassembled condition can simplify transport planning and allow the buyer to organize the layout of the malaxer, decanter, separator and electrical panel according to site requirements. Reassembly, mechanical inspection and functional commissioning are key stages before the equipment is returned to production.Operational Performance & VersatilityThe Vitone V5 decanter system is intended for oil processing applications, combining malaxing, decanting and separation functions. The 90 ql malaxer supports paste conditioning ahead of the decanter, while the included Alfa Laval separator is part of the final separation process. This configuration is relevant for processors seeking used bottling line ... Nodpfjz E Diuex Af Sowl

Condition: used, Year of construction: 2009, operating hours: 2,503 h, machine/vehicle number: LC679, Used Tetra Pak TBA19 125 slim 7500 PPH - Year 2009Technical Specifications & Performance DataTetra Pak TBA/19 TBA 12SS (RCI) filling machine configured for aseptic carton filling and integrated straw application. Built in 2009 and reconditioned in 2017, this equipment is designed for high-output industrial packaging operations where accurate filling and reliable downstream pack presentation are required.Manufacturer: Tetra PakModel: TBA/19 TBA 12SS (RCI) 030V Production speed: 7,500 packs/hFunctions: Filling and straw applicationManufacturing year: 2009Reconditioned: 2017Documentation: Manuals availableAdvanced Automation & Control SystemsThis filling and straw application machine is intended for automated carton packaging workflows. The integrated process combines carton filling with straw application, supporting continuous product handling and coordinated operation within an industrial packaging line. Operators should verify interface configuration, safety circuits, utilities and control integration during installation and commissioning.Production Line Integration CapabilitiesSuitable for use as the primary filling station in a Tetra Pak aseptic carton packaging line. It can be integrated with upstream product preparation and supply systems, as well as downstream conveyors, accumulation equipment, secondary packaging machinery, coding systems and pallet handling equipment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA/19 TBA 12SS (RCI)2009Various Equipment - Straw ApplicatorTetra Pak2009The machine supports streamlined handling of individual filled cartons and is suited to production environments requiring a compact filling and straw application process. Conveyor synchronization and downstream accumulation should be assessed according to the final packaging layout.Machine Condition & Maintenance HistoryThe machine was manufactured in 2009 and reconditioned in 2017. Manuals are available, supporting operation, maintenance planning and technical reference. The equipment is presented as ready for operation within a suitable prepared production environment.Operational Performance & VersatilityWith a stated capacity of 7,500 packs/h, this Tetra Pak machine is suited to beverage production and industrial packaging applications using carton packs. Filling and straw application are combined in the same equipment configuration, helping reduce handling steps between primary filling and consumer-ready pack preparation.As a second hand packaging solution, the machine can be considered for facilities seeking Tetra Pak c... Nsdpfx Afez E Df Nj Sowl