Used Omn Rv500 for sale (87)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Gedpfxsyq Avhe Af Sjiw Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20 40 27.07 / 207 - 090, type of input current: three-phase, Plasma cutting machine OMNICUT 4000 Control unit MS 100 Air extraction system Specifications: Rail length: 15 m Table length: 12.5 m Rail span: 4 m Table width: 2.6 m Giedpeyr Iguofx Af Sjw Plasma cutting unit HPR 130 Cutting thicknesses: Steel: 0.5 mm – 25 mm Stainless steel: 1 mm – 20 mm Aluminium: 1 mm – 20 mm Oxy-fuel cutting unit MSX 750, PCS 2100 Steel: 3 mm – 300 mm The machine has seen little use and is offered in full working condition, ready for operation.

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Godpfx Aorl U S Ejf Sjiw Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 Gijdpfxoxr Am Uo Af Sew KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Gedpfjw E Rfbox Af Soiw Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 360-6988C, total length: 5,800 mm, total width: 1,140 mm, total height: 1,270 mm, input voltage: 380 V, type of input current: three-phase, infeed width: 890 mm, product height (max.): 830 mm, input frequency: 50 Hz, We are offering this used HIX dryer CUSTOM NP-3619 CE exposure unit, year of manufacture 2006. Power: 27.2 kW Current at 415 V: 40 A Current at 380 V: 37 A Voltage range: 380–415 V Frequency: 50/60 Hz Number of conductors: 5 Gijdpfox Upvwox Af Sew Phase/neutral voltage: 220–240 V Serial number: 360-6988C If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1997, machine/vehicle number: 972842, SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - Mobile pressure system - Right/left feeding Godowr T Rmjpfx Af Sjiw - Conveyor belt TSLR 6000X400 - N. 3 unloading tables mm. 1000x1200 - Waste belt conveyor TSS 45° mm. 2500 - Strapping machine SIVARON SS-80 - Year 1997

Condition: excellent (used), Year of construction: 2002, Moba 330 Plateau Loader - Year 2000 Professional Moba 330 plateau loader, suitable for connection to both left and right configurations. The machine is inline deployable and can be converted to offline version by Bos Technical Support BV. The Loader is now in storage with us and available for immediate delivery. Description of the machine The Moba 330 plateau loader is designed for reliable and controlled Infeed of eggs to the grader. Thanks to its flexible configuration options, this plateau loader can be widely used within existing Moba lines. The machine has always been serviced by a dealer and is in good but used condition. Due to its relatively low load and solid construction, this Loader is still excellent for long-term professional use. Technical specifications Specification Description Brand Moba Type 330 Plateau Loader Construction year 2000 Capacity 120000 eggs per hour Version Suitable for left and right Use Inline Conversion Conversion to offline possible Condition Good, used condition Maintenance Always dealer-maintained Availability Directly available from stock Features & capabilities Suitable for left and right configurations Inline deployment Offline conversion possible (by Bos Technical Support) Robust and proven Moba technology Easy integration into existing lines State of the machine The platform Loader is in good but used condition. The machine has been professionally maintained and technically checked. No overhaul performed - selling in current condition, fully functional, can also be delivered overhauled. Delivery, transportation & support Machine is in stock at Bos Technical Support BV Directly available Conversion to offline execution possible Transportation and support worldwide negotiable Contact Gjdpex N Ecvefx Af Soiw Are you interested in this Moba 330 plateau loader or would you like additional information? Please contact Bos Technical Support BV without obligation. Are you interested in this Moba 170 Loader stand-alone or would you like additional information? Please feel free to contact Bos Technical Support BV for availability, price and delivery options. Sorteermachine eier verpakkingsmachine -eiersorteermachine egg gradingmachine sortiermachine sortieranlage eierverpackungsmachine MR 40 palletizer Maxipack, Moba, Sanovo, Staalkat, Prinzen, Rational, Kletec Yaskawa

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: Giodpfx Afox Apg As Sew – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Giodpfxszi Tqlj Af Sjw Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Giedpfx Afek Aa Dws Sjw Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), CONTEC-COMPRESSORS PARKER DOMNICK HUNTER CRD 0660 REFRIGERANT DRYER CAPACITY: 11 M3/MIN. YEAR OF MANUFACTURE: 2005 Giodpfod Exrbox Af Sow THE DRYER IS IN FULLY WORKING CONDITION. TOP-TIER IN TERMS OF PRICE AND QUALITY. I HAVE A LARGER QUANTITY OF SCREW COMPRESSORS AND REFRIGERANT DRYERS, AS WELL AS WELDING EQUIPMENT, FOR SALE. INSTALLMENT PAYMENTS AVAILABLE!!! CONTEC-COMPRESSORS