Used Niki Ag 90 for sale (17,282)

Condition: used, Stäubli Type: RX90 Stäubli Robot Control unit RX 90-CS7 Isdpfezdim Tsx Ahyeih Lifting capacity (nominal load - kg): 6 kg Total weight: 112 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details Iisdpeziiz Hjfx Ahyoh   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: CTS CW+40/7/7 Walk-in climate chamber CTS walk-in climate chamber, 7 m³ Temperature and humidity testing, 40–90°C Description: For sale is a CTS CW+40/7/7 walk-in climate and temperature test chamber in an industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, components, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and constant or programmed test cycles can be run. Due to the high air circulation, uniform climate distribution is achieved throughout the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Type: CW+40/7/7 Serial number: 113011 Year of manufacture: Design: Walk-in climate test chamber Test volume: 2 × 7 m³ Electrical data: Power connection: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climate data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % relative humidity Dew point range: +30 °C to +87 °C Protection class: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions of the complete system: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Iisdpfx Ahoylmamjyoh Further technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating element Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,050 kg, product length (max.): 4,030 mm, Edgebander manufactured in 2019. This LANGE Maschinenbau B 90 KFE features a panel thickness capacity of 8–60 mm and an edge thickness range of 0.4–3.0 mm. It has a feed speed of 8–10 m/min and a minimum straight-cut workpiece length of 120 mm. If you are looking to get high-quality edge banding capabilities, consider the LANGE Maschinenbau B 90 KFE machine we have for sale. Contact us for further details. • Panel thickness: 8–60 mm • Minimum straight-cut workpiece length: 120 mm • Minimum workpiece length with corner rounding: 200 mm Isdpez R N E Uefx Ahyjih • Minimum workpiece width: 75 mm • Edge thickness: 0.4–3.0 mm (up to 6 mm, depending on configuration) • Feed speed: 8–10 m/min • Electrical connection: 400 V, 50 Hz, 3-phase + neutral • Total connected load: 7.5 kW • Pneumatic connection: 6 bar

Condition: used, total width: 900 mm, total length: 1,200 mm, total height: 1,600 mm, Year of manufacture: 2016 Colour: Grey Weight: 300 kg - Year: 2016 - Documentation available: No - CE certificate present: No Iiedpfx Aoym Um Djhyjh - Serial number: 7/26 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 290 - Voltage [V]: 400 - Current consumption [A]: 6.5 - Fuse [A]: 16 - Transport dimensions: 1200mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, General information Year of manufacture: 2023 Mileage: 44 km Drivetrain Drive: Wheel Weights Empty weight: 1.030 kg Functional Dimensions of cargo space: 300 x 150 x 195 cm Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Production country: NL Additional information Please contact Vink Machinery for more information Frisian Motors Leffert FM-90 * 2023 Iodox I Ra Depfx Ahyjih * Lithium battery drive * 44 km/h (27 miles) * Dutch license plate * 4WD and 2WD * Glass windshield with wiper * Doors * Flashing beacon * All-trail tires * Winch with remote control * Heating * Built-in charger * 230-volt connection * Radio with Bluetooth * 1030 kg net weight

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Manufacturer: Behringer Iodozwhdpepfx Ahyeih Model: HBP 263 AG fully automatic metal bandsaw Year of manufacture: 2008

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor Semi-trailer, 90 cbm First registered 11/2025 Internal dimensions (L x W x H): 13,500 x 2,475 x 2,641 / 2,752 mm Axle distance: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,200 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced “CD” version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st and 3rd axles are lift axles Air tank, aluminum Tire size: 6x 385/65 R 22.5 JOST full-load swivel saddle Lighting: ASPÖCK full-LED Iijdpfoyih R Sex Ahyeh 4 x LED work lights Toolbox at the rear, on the left side Side walls with profile joints, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control system with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel 3 load securing bars, reinforced version for waste transport Reinforced roof tarpaulin, Panama 900 g Cleaning door in the front wall Rear crossbar can be tilted and unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is immediately available even in FULL-SERVICE RENTAL.

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Iijdpfsw Ec Riox Ahyeh Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: excellent (used), Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional laboratory freezer from the Lab-Care series, specifically designed for storing samples at extremely low temperatures in medical and scientific facilities. Technical Specifications The device is characterized by high temperature stability and safety features. As the LTF 90S is part of the Lab-Care series, it incorporates the standard features of this series from Infrico Medcare: Insulation: High-pressure molded polyurethane (CFC-free) with a density of 43–45 kg/m³ and a thickness of up to 100 mm for ultra-low temperature freezers. Iisdpfx Aheyk E D Ujyoh Refrigeration: Use of environmentally friendly, biodegradable HC refrigerants (CFC and HCFC-free). Control: Digital 5-inch TFT touchscreen for precise temperature control and an integrated data logger with a USB interface. Alarm System: Optical and acoustic alarms for temperature deviations, power outages, or doors left open for too long. Battery Backup: In the event of a power outage, a battery takes over the power supply to the controller to maintain temperature recording and alarms. Refrigeration: Use of natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmental friendliness. Construction: Interior made of stainless steel AISI 304 for easy cleaning; rounded corners inside to meet hygiene standards. The Infrico Medcare LTF 90S has a nominal capacity of 900 liters. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Iisdpjx Tdyzsfx Ahyjh Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: good (used), Kistler 9041A Piezoelectric Force Sensor, Force Measuring Ring, Fz 90 kN Iedpfx Ahek Uul Ejysih Item condition: Used R12A5K2-5-PD (BOR) You can find more sensors – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2023, condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N waranty 2 Years Iisdpfx Ahslczm Ioyeh

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW Iijdpsu Nfg Hofx Ahysh weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: new, Type: Z4A Number of drills/spindles Various head variants are available 4x3 Distance between first and last spindle 2300 mm Adjustable drilling speed Height of the working table 840 mm Table dimensions 600x2350 mm Number of clamps 8 Motor power 6 kW(4x1,5) 400 V Motor r.p.m. 2840 r.p.m Working air pressure 6-8 bar Iisdpfx Ahjhmbktjyjh Weight 425 kg Transporting dimensions 2450x960x1550 mm

Year of construction: 2020, condition: as good as new (ex-display), Plasma-nitrided rollers, 64 HRC hardness, max. sheet thickness 3 mm, max. width 120 mm, repeat accuracy +/- 0.06 mm Ijdpfx Ahog Ew Ixjyjih at a feed rate of 50 mm, 350 strokes/min. 180° clearance angle.

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). Iiodpsgtmv Sefx Ahyeh The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Iiodpfx Aher Ix Igeyjh Delivery on a Euro pallet, FOB Wuppertal

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Condition: Good, ready to use The extruder is my property Iiodpfeifgwljx Ahyoh Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Condition: excellent (used), Motan DH-1 N-A/B, transportable continuous-flow heater Here you are purchasing a functional continuous-flow heater from Motan. The unit comes from German Armed Forces stocks and is in very good condition. Iisdpjulgh Nefx Ahyeh Versatile for various applications, e.g., as a pool heater. Ideal for quickly heating swimming pools. A 100 m³ swimming pool can be heated to 30°C in 3 hours. You won't get the water warmer any faster. Perfect for use anywhere where there is no electricity available. Camping sites, weekend houses, construction sites, camping. Its effective output is continuously adjustable from 40.5 kW to 128 kW. Despite its high output, the unit is still portable with a weight of 130 kg. Since the water temperature can be set freely in the range between 30°C and 90°C, the unit can be used in many ways, e.g., as a hot water generator for camping site shower facilities, for hot water production. Also perfect for koi ponds. Technical data: Output: 35,000 kcal/h to 110,000 kcal/h, continuously adjustable (40.5 kW to 128 kW) Maximum water flow rate: approx. 3600 l/h Water at maximum heating output. At maximum water flow, the temperature increase is approximately 30°C, i.e., with a water inlet temperature of 10°C and an increase of 30°C. Resulting final temperature: 40°C Drive: Four-stroke engine, Fichtel & Sachs, Stamo 75, displacement: 75 cc Output: 2.5 hp at 4500 rpm Consumption: approx. 1.8 l/h, mixture 1:25 (for the engine!) For the burner, depending on the water flow, max.: 24 l/h of gasoline at maximum flow of 3600 l/h Tank capacity: 5 liters Dimensions: Width: 500 mm, Length: 1040 mm, Height: 850 mm Weight: approx. 130 kg Manufacturer's price: €8,000 You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for the pre-shredders VZ 120, VZ 110, VZ 90, VZ 55. Rotor shaft wear parts. Iiodofgiuzepfx Ahyoh Copper cable recycling machines. Made by Koch. Dortmund - Dorstfeld. Germany. Our non-binding offer: - Labyrinth rings - Dirt deflectors - Spacing rings - Rotor shafts Terms and conditions on our website. Our goal – to help you.

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-works: Union table drilling machine Type BFT 90 / 2 Year of manufacture 1975 / Overhauled and fitted with digital displays in 2022 Spindle 90 mm Mounting SK 40 with adapter MK 4 Table 1120 x 1000 mm Table load 2500 kg Distance spindle – stop 2400 mm Travel distances X/Y Z 1000 / 1250 / 1000 mm Spindle speeds 8 - 1600 rpm 2 digital displays Ijdpsz I Na Defx Ahyjih Stop Spindle travel 710 mm Weight 9 tons For the price of Euro 8,500.—plus VAT ex-works.

Condition: like new (used), Year of construction: 2018, Modular belt, belt length 2,450 mm, Kraus – used: Iedpez I Einsfx Ahyeih Price ex works: only €3,950 (net), disassembled, packed, and loaded! Industrial conveyor belt with a robust, profiled frame design. Reliable and robust, it is suitable for: • Transport of molded parts, • Machine discharge of components for removal (integrated/partially integrated/self-contained), • Transport of various materials Manufacturer: Kraus Betriebsausstattung und Fördertechnik GmbH, AT-Klagenfurt Type: FB 90 MODUL Year of manufacture: 2018 Technical data: Maximum total load capacity: 100 kg Conveyor speed: 2 m/min Belt length: 2,450 mm, overall length approx. 2,600 mm Frame width: 1,300 mm Belt width: 1,200 mm Height: approx. 920 mm Belt design: Modular belt 1" PP/grey FDA Drive: Gear motor, SEW 230/400V – 50Hz, IP54 Installation position: Floor Design: Frame: galvanized profiles with bolted cross braces Connection cables for connecting to a machine / Harting connector Installed signal cables for 2 x light barriers / Harting connector Original new price: €7,000 (net) Condition: Like new, scratches on the motor housing Operating hours: < 100 operating hours Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Type: P – 90 C Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Iiodpfx Aez Ip H Rehyoh Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: refurbished (used), Year of construction: 2020, operating hours: 3,490 h, load capacity: 3,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 3,921 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: Front forklift EFG 430k Drive type: Electric Load capacity: 3,000 kg Year of manufacture: 2020 Operating hours: 3,490 Lifting height: 4,700 mm Mast type: Triplex Free lift: Yes Overall height: 2,185 mm Fork length: 1,200 mm Unladen weight: 3,921 kg Load center: 500 mm Tires: Solid rubber Model type: EFG 430k Battery type: PzS Voltage: 80 V Battery weight: 1,558 kg Cab type: Partial cab - front, roof & rear window Iiodpfx Ajz Ikfbjhysh Cab equipment: SoloPilot control element Lighting: Work lights 2x front Lighting: Work lights 2x rear Lighting: Rotating beacon Attachment: Side shifter Attachment: Additional hydraulic circuit - routed to fork carriage