Used Minipack-Torre Fm76A Evo for sale (687)

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: Lsdjztwx Ujpfx Ab Ajru frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: used, Year of construction: 2005, Filling machine for the production of mineral water or carbonated beverages in PET bottles. Manufacturer: LINNEA-ZEVOS Chotebor Model: AQUAFILL 40/60/12 Capacity: 9,000 bottles per hour (1.5 L and 0.5 L) Lodpfxjzwpbps Ab Asru Year of manufacture: 2005 Includes accessories for 1.5 L and 0.5 L bottles. Caps: PCO 1881 Used machine, in good working order, regularly serviced.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW Ljdpfx Aboy Uhxks Aoru 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, Year of construction: 2011, total length: 2,000 mm, Warehouse technology Dulevo Kehrmaschine 90 BK Drive Gas Year built 2011 Lodpfx Abszcztpj Aeru

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, Lodpfxovmbzwo Ab Ajru clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: excellent (used), Ball mill Vollrath EFC 200 Wet and dry grinding Iron-free grinding with steatite balls Lining made of hard porcelain Volume 200 l Drive power 1.4 kW Speed 42 1/min Three ball mills mounted on a steel frame Lodpfx Ask D Dwteb Aoru In very good, ready-to-use condition, directly from production!!!

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. Lrsdpfx Ajtp H Erob Aeu The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: excellent (used), Perlmühle Vollrath VMSM 2/8 B Ex-protected design Double chamber Grinding pot 2 x 8 l Double jacket Power 18.5 kW Ledpfx Ajh Svr Ssb Aeru In very good, ready-to-use condition, directly from production!!!

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: Ljdshz Twwjpfx Ab Ajru additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) Lrodpfef Epzgjx Ab Aeu The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: not inspected (used), functionality: unexamined, Year of construction: 2020, operating hours: 16,254 h, load capacity: 5,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,720 mm, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, 5,000 kg Service + Safety Inspection (UVV) 02/2027 3rd & 4th Valve Fork Positioner AC Air Conditioning Diesel Forklift Truck No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 5,400 mm Fork length: 2,400 mm Free lift: 150 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 16,245 h Mast type: Clear-view Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,800 x 1,450 x 3,720 mm Weight: 7,700 kg Lodpfx Ajyudkbsb Ajru FEATURES Ex-Linde service machine Current service performed, next due in 755 hours Full cab with air conditioning, heating, and windscreen wiper Clear-view mast without central hydraulic cylinder 3rd & 4th valve for fork positioner with sideshift Note: Dismantling of the mast can optionally be offered by the seller for €950 net. All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large onsite forklift at your own risk. Collection ONLY with emailed payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payment of arrears required before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2019, operating hours: 13,213 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,400kg Duplex Free Lift Electric Forklift No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 3,145 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 13,213 h Mast type: Duplex Drive type: Electric Battery: 48 V 500 Ah, measured at 49.5V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Former Linde full-service unit Duplex mast with full free lift 3rd valve with sideshift Load guard (can be easily removed) All dimensions are approximate. No liability for typing or measurement errors. Lrsdpeyufbhofx Ab Aou COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site, at buyer’s own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00 am–4:30 pm. High masts can be dismantled for transport on request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day applies (payment due before collection).

Condition: new, Year of construction: 2026, ZP3000 Battery-Powered Sweeper The modern ZP3000 battery-powered sweeper is designed for intensive cleaning and maintenance of warehouses, industrial facilities, logistics centres, car parks and outdoor areas. With a cleaning performance of up to 4,500 m²/h, the ZP3000 combines efficiency, operator comfort and low operating costs, ensuring thorough removal of dust, dirt, leaves and small debris. The ZP3000 electric sweeper has been developed for the most demanding environments. Its robust construction, durable side and main brushes, and spacious 35-litre waste container allow large areas to be swept quickly and efficiently. Intuitive controls provide excellent operator comfort, even during long working periods, while the battery-powered drive ensures quiet and environmentally friendly operation, making the machine ideal for both indoor and outdoor use. Thanks to its water spray system, the ZP3000 enables simultaneous sweeping, vacuuming and light surface washing. The 105 cm working width and two 45 cm side brushes allow thorough cleaning of even hard-to-reach corners and edges. Using this machine helps reduce cleaning and maintenance costs while maintaining high standards of hygiene. Key Features of the ZP3000 Sweeper Cleaning performance: up to 4,500 m²/h – fast and efficient cleaning of large areas. Battery-powered drive: cable-free and emission-free operation that is quiet and environmentally friendly. Working width: 105 cm – a wide cleaning path for efficient operation. Main and side brushes: 2 side brushes, 45 cm each, for precise cleaning along edges and in corners. Waste container: 35 litres – fewer interruptions and increased productivity. Dust suction and water spray system: more effective removal of dust and light dirt. Ergonomics and safety: stable construction and easy operation. Versatile applications: warehouses, production halls, logistics centres, car parks and commercial facilities. Why Choose the ZP3000? With the ZP3000 battery-powered sweeper, maintaining cleanliness in warehouses, industrial halls and other facilities is fast, efficient and hassle-free. This self-propelled sweeping machine effectively removes dust, dirt, leaves and small debris, minimising the time required for cleaning. The ZP3000 electric sweeper with a water spray system is an ideal solution for companies that value efficiency, ergonomics and environmentally friendly operation. The machine operates quietly and without exhaust emissions, while its 105 cm working width and two 45 cm side brushes ensure thorough cleaning, even in hard-to-reach areas. The ZP3000 is a reliable solution for professional cleaning and maintenance – from production halls and warehouses to outdoor areas and logistics centres. Applications of the ZP3000 Sweeper Production halls and warehouses, Logistics and distribution centres, Commercial facilities and large retail stores, All areas requiring efficient, emission-free cleaning. Technical Specifications Sweeping width 1050 mm Cylindrical brush width 435 mm Side brush width 300 mm Waste container capacity 35 l Operating time 3–4 h Cleaning performance 4,500 m²/h Battery 12 V / 100 Ah Main brush motor power 200 W Side brush motor power 90 W × 2 Driving speed 0–8 km/h Dimensions 1080 × 1050 × 1080 mm Weight 90 kg Lredpfx Ajyufwvsb Asu

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm Lrjdpfx Ajzz Hq Aeb Aou The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Lrsdpfx Aboy A Typo Aeu Main technical specifications: • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Lredpfx Abod I R E Ne Aju Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Machine type: Textile Cutting Machine Year of manufacture: 2014 Voltage: 400 V Current: 24 A Pressure: 6 bar Lrodpfxjzg Tu Sj Ab Asu Frequency: 50 Hz Short-circuit current: 10 kA Weight: 1500 kg Number of phases: 3 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, total length: 7,800 mm, - Max. Arbeitshöhe Straße: 14,10 m - Max. Arbeitshöhe Maschine stehend Schiene: 14,40 m - Max. Arbeitshöhe bei Fahrt Schiene: 12,90 m - Max. Plattformhöhe Straße: 12,10 m - Max. Plattformhöhe Maschine stehend Schiene 12,40 m - Max. Plattformhöhe bei Fahrt Schiene 10,90 m - Max. seitliche Reichweite Straße 9,30 m - Max. seitliche Reichweite Maschine stehend 9,30 m - Max. seitliche Reichweite bei Fahrt Schiene Lsdpfx Abj Adl Ipj Asru - Max. Traglast Arbeitskorb 400 kg - Drehbereich 180 Grad - Steuerung: proportional - Max. Fahrgeschwindigkeit Straße: 4 km/h - Max. Fahrgeschwindigkeit Schiene 18 km/h - Korbdrehung: 90 Grad

Condition: excellent (used), Year of construction: 2003, operating hours: 1,755 h, functionality: fully functional, machine/vehicle number: 090DM00448/01, fuel type: diesel, Dulevo 90 DM Ledpfezkkytjx Ab Aeru

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Lsdpfezkmqnjx Ab Ajru Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg Originally installed in an Airbus production facility and used for precision trimming and milling of aircraft fuselage window openings. The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. Lrodpfx Aozrt Ivob Asu This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 2,000 rpm, table length: 1,100 mm, table width: 842 mm, X axis: mm 1.000 Y axis: mm 700 Ljdpjzizgbsfx Ab Aeru Spindle travel: mm 300 Table dimensions: mm 1.100 x 842 Spindle speed: rpm 40 – 2.000 Spindle cone: MT 4 Max power: kW 10 Max loading on table: ton 1 Machine weight: ton 15 EQUIPPED WITH A LOT OF ACCESSORIES

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. Lredpfx Aoq U N T Rsb Aju The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. Ledpeqxadbefx Ab Aoru We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. Ljdpfsqxandox Ab Ajru So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.