Used Lubrication Oil Pumps for sale (15,941)

Year of construction: 2008, condition: used, X-axis: 330mm, Z-axis: 1650mm, max. swing over bed: 910mm, swing over cross slide: 560mm, distance between centers: 1820mm, standard turning diameter: 450mm, max. turning diameter: 610mm, max. turning length: 1650mm, bar capacity: 184mm, spindle speed: 12-1200rpm, spindle nose: A2-15, spindle bore: 200mm, spindle bearing diameter: 266mm, turret type: T10, square tool height: 32mm, boring bar holder diameter: 65mm, tailstock travel: 1400mm, quill stroke: 200mm, tailstock taper: MT5, tailstock quill diameter: 160mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, jog feed X-axis: 0-1260mm/min, jog feed Z-axis: 0-1260mm/min, spindle motor power: 30/37kW, X-axis servo motor: 4kW, Z-axis servo motor: 7kW, hydraulic pump: 2.2kW, lubrication pump: 0.004kW, coolant pump: 1.1kW, connected load: 52kW, coolant tank capacity: 300l, hydraulic tank capacity: 83l, lubricating oil tank capacity: 4l, length: 4740mm, width: 2130mm, height: 2090mm, weight: 11t, with documentation. The machine was commissioned in 2008 and operated in single-shift production only, it is currently no longer in operation and has been idle for approx. 2-3 years. An on-site inspection is possible. Isdozz Iruopfx Apcobb

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,500 h, machine/vehicle number: S40-5934, load capacity: 227 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Top maintained – extensive repairs – ready for immediate use For sale is a Genie S45 telescopic boom lift in very good technical condition. The boom lift has undergone extensive refurbishment and regular maintenance in the last two years. All invoices are available and can be viewed during inspection. Technical data • Manufacturer: Genie • Model: S45 • Year of manufacture: 2001 • Operating hours: approx. 6,500 h • Working height: 15.7 m • Platform height: 13.7 m • Lateral reach: 9.65 m • Load capacity: 227 kg • Drive: Diesel • Four-wheel drive • Serial number: S40-5934 Extensive investments: In 2023, the engine underwent extensive overhaul (invoice for €9,013 gross): Ibedpezrgmrofx Apcob • Engine completely serviced • Connecting rod and crankshaft bearings replaced • Piston rings replaced • Cylinder head gasket replaced • Starter replaced • Oil, air, and diesel filters replaced • V-belt replaced • Numerous other wear parts replaced In 2024, further extensive maintenance and hydraulic work was carried out (invoice for €5,254 gross): • Swing drive motor replaced • Hydraulic pump sealed • Hydraulic hoses replaced • Hydraulic oil replaced • Engine oil and all filters replaced • Machine completely lubricated • Functional test performed • Safety inspection performed Condition • Technically fully functional • Ready for immediate use • Normal age-related signs of wear • No known defects • Inspection and test operation possible at any time by appointment. In 2023 and 2024, over €14,000 was invested in the machine. As a result, the boom lift is in significantly better technical condition than many comparable machines of this year of manufacture. Price: €13,900 net negotiable (16,680 € gross) Location: Laakirchen (Upper Austria)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Ijdozb Il Njpfx Apcsbb Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 2003, operating hours: 67,400 h, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz Ibodszvf Najpfx Apcob - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Year of construction: 2007, operating hours: 1,302 h, condition: excellent (used), functionality: fully functional, Putzmeister 1407 D stationary pump. Fully refurbished and renewed. Sandblasted and painted. New oil and filters. Many new parts. Like new. Ready for work. The Putzmeister BSA 1407 D is a reliable stationary concrete pump with the following specifications: Engine: diesel engine Output: Up to 71 cubic meters per hour Vertical Reach: 100 meters Horizontal Reach: 250/300 meters Ibsdpfx Asytcfhjpcob Maximum Pressure: 106 bar Capacity: 600 liters (Concrete hopper with agitator). This pump is designed for medium-sized construction sites and is known for its durability and efficiency. We accept barter.

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, progressive pump, central lubrication pump -Handover: in its current condition as inspected -Device condition: not functioning, control board missing -Manufacturer: Lincoln, Quicklub central lubrication pump -Type: 645-41110-1 -Voltage: 100-240 V Ijdpfx Ajhv Ilwspcjbb -Power: 60 watts -P max: 240 bar -Dimensions: 270/240/H570 mm -Weight: 15.5 kg

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) Isdpfx Apjzzz N Hecsbb - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m Iedpfoxxkd Ujx Apcobb # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: B0.01177.0628, operating pressure: 570 bar, type of input current: three-phase, input voltage: 400 V, temperature: 70 °C, volume flow: 7.44 m³/h, water pressure: 570 bar, pump capacity: 124 l/min, rotational speed (max.): 1,500 rpm, Equipment: type plate available, For sale is a Hammelmann high-pressure pump unit on a base frame, with a 132 kW three-phase motor and a partially transparent protective housing. The exact model designation is not explicitly stated on the existing nameplates; the following data for the offered machine are decisive. Technical data according to the pump and motor nameplates: - Machine number: B0.01177.0628 - Order number: 09.11179.1046 - Year of manufacture: 2010 - Maximum operating pressure: 570 bar - Flow rate: 124 l/min - Piston diameter: 40 mm - Pump drive power: 131 kW - Speed: 1,500 rpm - Maximum fluid temperature: 70 °C - Pressure control valve: 0022 - Oil type: BM 320 - Oil quantity: 12.5 l - Oil pressure: 2.0 bar - Motor: AC Motoren GmbH/Küenle AH 315 MA-4 - Motor power at 50 Hz: 132 kW - Motor voltage at 50 Hz: 380–420 V Δ / 660–720 V Y - Motor protection class: IP55 Visible scope of supply according to the images: - Hammelmann high-pressure pump - 132 kW three-phase motor - Coupling and drive - Pressure control and safety valves - Lubrication/oil unit - Connection lines and cables - Base frame and partially transparent protective housing Ibedpfx Aszzr Nqopcsb Used condition with dirt and/or oil stains, paint chipping and surface rust, especially on the motor protection grille. The functional condition has not been re-checked after disassembly; therefore, it is sold as untested. No separate control cabinet, no lance, and no long high-pressure hose are included. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils Iodpex Ah A Aefx Apcsbb - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Ibsdjzw H Hiopfx Apceb Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg Ijdpfsxxrnbox Apcebb # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * Machine designed for high material removal rates. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Lubrication system for guides, oil-fed, with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting power of 580 N/m. * Chip evacuation capacity of 540 cm/min. Iedpfx Apsz Alh Njcjbb * Automatic Okuma IGF OSP300 conversational programming system. * Automatic force control and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS 232. * Tool life management and tool consumption monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Permissible weight: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Oil cooler for the spindle. * Rapid traverse speed: 20,000 mm/min. * Tool storage for 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron anti-particle filter system. * LTA fume extraction equipment. * Rear chip extractors, hinged type. * Machine currently in production. * Inspectable by a qualified, certified Okuma technician. * Near-new condition. * Extensive range of BT 50 tool holders. * Electrical transformer, documentation, parts list, electrical diagrams, programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold prior.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Iodpfx Apewrp Emocjbb Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Iedpfszy Ndcex Apcobb Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates Ibsdjxiwg Rjpfx Apcjb With Lenze series 8200 vector frequency inverter (adjustable speed) Complete with original manuals and diagrams

Year of construction: 1985, condition: excellent (used), Fully automatic with feeder 3 rear knives, 2 with split blocks Isdpfx Apjih H Ntscobb 900 mm trolley Automatic oil and grease lubrication pump Suitable for work in both directions

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel Ibjdpfsy Exqlox Apcsb - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes-Benz Arocs 5 3546 8x4 EURO6 with Schwing concrete pump S 43 SX III 5-section boom ???including Easy-Flex outrigger system??? First registration: unregistered Mileage: 500 km Color: Arctic White Technical Data * Power: 335 kW * Horsepower: 455 hp * Tire size, front and rear: 315/80R22.5 * Gross vehicle weight: 35,000 kg * Emission class: Euro 6e * Transmission: automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment * Twin-plate clutch * M cab Classic-Space, 2.30m, tunnel 320mm * Comfortable cab suspension * Front axle: 7.5t, straight version * Rear axle: 13.4t, bevel gear 233, planetary gear * Transmission oil cooler * Fuel tank: 290L aluminum + 25L AdBlue * Disc brakes, front and rear * Sun visor * Air conditioning * ABS + ASR * Driver's comfort air-suspension seat, velour leather * Fog lights, LED daytime running lights * Multimedia cockpit, interactive with navigation and Bluetooth * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-installation for breathalyzer with immobilizer Ibsdpfx Aji Tkbdjpcsb * Rear view camera Superstructure Equipment * Schwing S 43 SX III 5-section concrete pump, 43m * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 42.30m * Horizontal reach from turntable: 37.55m * Placing boom: 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162 m3/h * Vector control system * Slide valve system: B-Rock * Electric vibrator system on hopper grate * Slewing range: 2 x 365° * Outrigger system: Easy-Flex, CE * Filling height: approx. 1350mm * Hydraulic drive, max. volume: 636 l/min. * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump * Remote control: Schwing Control 30 * Oil cooler * MPS control system Non-binding offer ex works Cologne. Subject to prior sale and errors. Sale only to commercial customers.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow Oil Cooler D20V D30V 2 Flow Oil Coolers - Coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulating coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr Flow Oil Cooler Type D 20 V, Year of manufacture 1998, serial number 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow Oil Cooler D 30 V Wöhr Flow Oil Cooler Type D 30 V, year of manufacture 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Iodpfx Apsg U H E Secjbb Price negotiable Our target price per unit is €1,950 net, ex works, plus packaging costs. All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Union.

Condition: used, Rotary vane vacuum pump Two-stage Oil-lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat. No.: PK D27 602 / K141 Condition: Used (functional!) (A complete overhaul can be offered as an option) Suction capacity: approx. 250 m³/h Ultimate pressure: > 5 x 10-3 mbar Warranty: 12 months (with complete overhaul) Iedpjcu Tlpefx Apcebb Includes: Operating manual and oil Delivery time: ex works

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW Ibodpfx Asxlctbspcsb - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Initial commissioning on site Training

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. Isdpfxjya Da He Apcebb The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Isdpfezwt Ndsx Apcebb Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Busch MM 1142 B VS3 Vacuum Pump Isdpfx Apjxvi Aqscobb Manufacturer: Busch Vacuum Solutions Model: MM 1142 B VS3 Serial Number: D15242694 Year of Manufacture: 2015 Capacity: 140 m³/h Weight: 175 kg Dimensions: 1000 mm × 400 mm × 700 mm Pump Type: Dry claw vacuum pump The Busch MM 1142 B VS3 vacuum pump is a modern, oil-free “dry claw” pump designed for efficient and clean generation of vacuum in industrial applications. Its oil-free compression chamber design eliminates the risk of process contamination, making this pump ideal for industries requiring high process purity. The unit features quiet operation, low operating costs, and high reliability. Its compact design makes integration into production lines and central vacuum systems easy. Applications: - Food and packaging industry - Production lines and automatic vacuum systems - Plastics processing, foundry work, printing - Laboratories and central vacuum systems