Used Lauda Secondary Circuit for sale (3,651)

Condition: used, mileage: 380,900 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Tipper hydraulics, single-circuit system with tipper lever in the cab. Hydraulic tank, 200 liters. * Full service history ---- ----* 12-speed automatic transmission * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary water retarder * Wheelbase: 3,700 mm * Driver's air-suspended comfort seat * Wide, level, upper comfort bed * Lower comfort bed * PremiumComfort mattress, lower bunk * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting for driving and living * Electric stand air conditioning * Automatic climate control * Residual heat utilization * Additional hot water heater, cab * Additional thermal insulation, cab * Electric sliding/tilting glass sunroof * Interface for Fleet Management System (FMS) * 24V trailer socket, 15-pin * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Adjustable aerodynamics package with end-edge flaps * External transparent sun visor * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver's seat * Tires: 315/70 R 22.5 * Rear axle tires: 315/70 R 22.5 * Rear axle air suspension * Navigation system * Fuel tank: 570 liters * AdBlue tank: 60 liters * Hydraulic tank: 200 liters * Automatic high/low beam and cornering light Gsdpoy U R U Iofx Ak Ujkb * Engine: OM 471, R6, 12.8 l, 375 kW (510 HP), 2500 Nm * Euro 6, D engine version * High Performance Engine Brake * NA MB 131-2c pump * Gearbox oil cooling * Safety Pack * Chrome interior package * Climate package * Comfort package * Tipping control, in cab * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Drawer refrigerator under bed * EBS * Single PTO * Without spare wheel ----Sale to commercial customers only! No warranty for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to provide a leasing or financing offer.

Condition: used, mileage: 383,700 km, power: 375 kW (509.86 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Tipping hydraulics, 2-circuit system with tipping lever in the cab. 200-liter hydraulic tank. * Moving floor hydraulics -- 2-circuit hydraulic system with connections available in front of and behind the fifth wheel coupling. --* 12-speed automatic transmission * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary water retarder * Wheelbase: 3,700 mm * Comfort driver's air-suspension seat * Lower comfort bed * PremiumComfort lower mattress * Shaving mirror * Electric sunshade, one-piece * LED ambient lighting (driving and living area) * Electric stationary air-conditioning unit * Automatic climate control * Residual heat utilization * Additional hot water heater for cab * Additional thermal insulation for cab * Electric sliding/tilting glass sunroof * Interface for Fleet Management System (FMS) * 24V, 15-pin trailer socket * Reverse warning system * NATO socket * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Storage compartments above bed * Adjustable air deflectors with end flaps * Exterior sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver's seat * Air suspension, rear axle * Navigation system Gsdpfx Aszag Exek Uokb * 570-liter fuel tank * 60-liter AdBlue tank * 200-liter hydraulic tank * Automatic headlight and cornering light dipping * Engine: OM 471, inline-6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version: Euro 6, D * High Performance Engine Brake * Safety Pack * Chrome Package, interior * Climate Package * Comfort Package * Tipping controls in the cab * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Turn Assist (Blind Spot Assist) * Active Brake Assist 5 * Driver's airbag * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS * Without spare wheel -- Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to provide you with a leasing or financing offer.

Condition: used, mileage: 383,700 km, power: 375 kW (509.86 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Tipping hydraulics, 2-circuit system with tipping lever in the cab. 200-liter hydraulic tank. * Moving floor hydraulics -- 2-circuit hydraulic system with connections available in front of and behind the fifth wheel coupling. --* 12-speed automatic transmission * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary water retarder * Wheelbase: 3,700 mm * Comfort driver's air-suspension seat * Lower comfort bed * PremiumComfort lower mattress * Shaving mirror * Electric sunshade, one-piece * LED ambient lighting (driving and living area) * Electric stationary air-conditioning unit * Automatic climate control * Residual heat utilization * Additional hot water heater for cab * Additional thermal insulation for cab * Electric sliding/tilting glass sunroof * Interface for Fleet Management System (FMS) * 24V, 15-pin trailer socket * Reverse warning system * NATO socket * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Storage compartments above bed * Adjustable air deflectors with end flaps * Exterior sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver's seat * Air suspension, rear axle * Navigation system * 570-liter fuel tank * 60-liter AdBlue tank * 200-liter hydraulic tank * Automatic headlight and cornering light dipping * Engine: OM 471, inline-6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version: Euro 6, D * High Performance Engine Brake * Safety Pack Godpszag E Eofx Ak Uskb * Chrome Package, interior * Climate Package * Comfort Package * Tipping controls in the cab * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Turn Assist (Blind Spot Assist) * Active Brake Assist 5 * Driver's airbag * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS * Without spare wheel -- Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to provide you with a leasing or financing offer.

Condition: excellent (used), Water-cooled, manually operated DALEX spot welding tongs Type 3218 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN with cardan suspension and mounting bracket 1 pair of electrode arms, 170 mm reach included: DALEX synchronous welding control unit RS 12 Power control via phase angle control Weld time 1-99, adjustable in synchronisation with connecting cable and 32 A CE plug Gjdpfx Ajf Hi A Eok Uokb and main switch

Condition: new, Year of construction: 2018, functionality: fully functional, nominal power (apparent): 32 kVA, We offer a selection of brand new Schneider Electric components, all in original factory packaging. This equipment is ideal for industrial electrical installations, switchboards, and power distribution systems. 🔹 Switch Disconnectors (3P): Schneider MTZ2 25HF - 1 pc Schneider MTZ2 25HA - 4 pc Schneider MTZ2 16HA- 10 pc 🔹 Compact Breaker: Schneider NS630b – 1600 A Compact 16 pc Schneider EF593816 – Front power connections- 16 pc Gedpswrzl Sefx Ak Uskb 🔹 Molded Case Circuit Breakers (MCCB): Schneider NW25H2 – 2500 A – 4P Condition: Brand new Packaging: Factory sealed Location: United Kingdomб Leeds Availability: In stock, ready for dispatch Photos, technical datasheets and prices available upon request

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German Gkodpeibzbhofx Ak Ujb 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Gedswi Icxopfx Ak Uokb Pumps were dismantled in working order. Dismantled and packed on several pallets. Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Gsdpfx Aszizkyok Uokb Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts Gsdpfxjzvfk De Ak Uokb • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2017, condition: ready for operation (used), Wittmann MTC Primus-C90 F27 Temperature Control Unit Single-Circuit Temperature Control Unit Price is for one unit. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to arrange an inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Gkodpjyw Rfxjfx Ak Ueb The company names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the article description are possible and reserved.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm Gkedpfxjzzkt Uj Ak Uob MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Dalex-Werke Gsdpfxog Rcpxe Ak Uekb Pms 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage 380 V - 50 Hz Open-circuit voltage of 5.6 V Electrode force: 65-390 daN Machine weight: 341 kg

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. Gedpfx Akezq Ax Ue Uekb The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, overall weight: 37 kg, SIEMENS 3WN6 WITHDRAWABLE AIR CIRCUIT BREAKER – 1,000 A Manufacturer: Siemens Series: 3WN6 Type: 3WN6271-7FH58-1KA3-Z Version: withdrawable air circuit breaker Number of poles: 3 Frame size: I Rated current In: 1,000 A Frequency: 50/60 Hz Rated operational voltage Ue: 500/690 V AC Breaking capacity Ics = Icu: 65 kA at 500 V / 50 kA at 690 V Short-time withstand current Icw: 50 kA for 0.5 seconds Rated impulse withstand voltage Uimp: 8 kV Gksdpfx Aszw Tx Eok Usb Utilisation category: B Motor operating mechanism: 220–240 V AC / 220–250 V DC F1 shunt release: 220–240 V AC / 220–250 V DC Y1 closing coil: 220–240 V AC / 220–250 V DC Options stated on nameplate: F21, S22, S21 and S05 Standards: IEC/EN 60947-2 and DIN VDE 0660 T.101 Identity number: 3200904083 Estimated net weight: approximately 37 kg Made in Germany Siemens 3WN6 withdrawable air circuit breaker for switching and protecting industrial low-voltage power distribution systems. The breaker is equipped with an electrical motor operating mechanism, closing coil, shunt release and electronic overcurrent trip unit. Pre-owned unit. As the complete operating history is not known, the unit is offered as used. It has not recently been functionally or load tested by us in a switchgear installation. Inspection and testing by a qualified electrical specialist are required before commissioning. The photographs show the actual unit offered and the included scope of supply. Please verify the complete type number, control voltage, connections and compatibility with the existing switchgear before purchasing. Available from stock. Worldwide freight shipment can be arranged. 9 units available

Condition: used, mileage: 714,112 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ... Godpfx Akjy T Uuis Uekb

Condition: used, mileage: 736,739 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: Gjdey T Uucepfx Ak Ujkb - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ...

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Gedpfx Asz Afhijk Uskb Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply Gkedpszx D Tcofx Ak Usb The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: good (used), Year of construction: 2005, machine/vehicle number: AA1/014879, functionality: fully functional, input voltage: 400 V, input current: 106 A, input frequency: 50 Hz, type of input current: three-phase, We offer this very good SCM RECORD 110 AL machining center, year of construction – 2005. Serial number: AA1/014879 Machine number: 2966282040H Reference: 052635 Supply voltage: 400 V Number of phases: 3 Operating current: 106 A Short-circuit current rating: 10 kA Frequency: 50 Hz TECHNICAL DETAILS Processing type: Drilling, milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel passage: 200 mm Number of working fields: 2 Table type: Flat table Table configuration: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: top Gedpfxozua Tds Ak Ujkb Controlled axes: 5 Spindle cooling: liquid cooling Grooving unit Number of grooving units: 1 Installation position: top Design: fixed grooving unit Grooving direction: X-direction If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request. Gkodpfx Ajzzm Dpsk Usb

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Gkodpfozx Ergox Ak Ujb Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Gkjdpfszmm Dgox Ak Ujb

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) Gedoyvh Nxjpfx Ak Ujkb NO CE mark, NO CE declaration of conformity

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Gksdpezvb I Eofx Ak Ujb Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Gkjdpfx Ajzd Rtyek Ueb Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.