Used Kunzmann Wf 4/3 Fräsmaschine for sale (93,315)

Year of construction: 1999, condition: ready for operation (used), Table dimensions X/Y: 1000mm/350mm, grinding belt length: 2600mm, grinding belt width: 150mm, belt speed: 20m/min, grinding beam swivel range: 90°, machine dimensions X/Y: 1650mm/900mm, weight: approx. 300kg. An inspection on site is possible. Laodpsyrg Hgjfx Abzog

Condition: used, functionality: fully functional, machine/vehicle number: H2X3886E55171, Year of construction: 2014, operating hours: 877 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, empty load weight: 3,024 kg, drive type: Elektro, Electric four-wheel forklift Chassis number: H2X3886E55171 Mast type: Duplex Technical condition: normal Front tire type: Solid rubber Front tire condition: 80 - 100% Lajdpszt Drbefx Abzsg Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery type: PzS Description: German Linde E16P-02 No.: R0808 Year of manufacture: 2014 Operating hours: 877 Drive: Electric Lifting capacity: 1,600 kg Lifting height: not specified Overall height: 2,160 mm Mast: Duplex Chassis number: H2X3886E55171 Battery: PzS, further details not specified Tires: solid rubber front approx. 80–100 %, superelastic rear approx. 60–80 % Equipment: Side shift, third and fourth hydraulic valve, front work lights and interior mirror. Charger: not included Condition / known defect: The lifting function of the forklift is currently not operational. According to our current assessment, the cause is a defect in the valve block. However, we do not guarantee this assessment and cannot rule out that there may be additional causes. All other functions of the machine are currently operational. Due to the defective lifting function, the machine is particularly recommended for repair projects or buyers with appropriate technical experience. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, 3rd valve, 4th valve, front work lights, interior mirror.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen Lodoz Dgpbopfx Abzsag • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • GEKU automation with conveyor belts (included)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area: 31.2 m² RH 3500 mm Fan: 5.5 kW Diameter: 250 mm, reduced to 300 x 240 mm Mounting brackets Laodpfeiamtpjx Abzjg Feet Lid and filter hoses Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: used, Year of construction: 2005, FANUC 160 I-MB control KNOLL chip conveyor, type 1200 S-2, made in 2012 Laodpfx Abefxgiyozsg 4 workstations

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We are offering for sale our Kuka laser welding robot KR60-3 with KRC4 ROBOTstar controller. The system is in very good condition and is being sold only due to a product change by a customer. Laser welding robot KR60-3 with KRC4 ROBOTstar controller. Scanner – processing optics in combination with a camera system for welding copper connections. Component feed via Bosch Rexroth transfer system TS 2 plus. Laser system from IPG with 5 kW power and a fiber output. Media supply. Rotary-tilting module DKP 400. Laser protection cabin, active according to EN 60825. Control panel / HMI for operating the system. KUKA system control and PLC cabinet. Ljdpfx Aevtnd Ssbzoag Extraction and filter system. The system will be sold from its current location (Zollner Electronic, Str. Parc Industrial Sud 10, Satu Mare 440247, Romania). We will gladly answer any questions you may have about the system and provide you with all relevant documentation. The new price of the system in 2019 was approximately €980,000. Inspection and demonstration are possible at any time by appointment. Special feature of the system: also suitable for deep copper welding!!!! Expected availability: Immediately. We would like to emphasize “explicitly” the very good technical and visual condition of the entire system!!! The camera head alone costs more than €85,000!!!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Lasdpozza U Uefx Abzjg Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Ljdpfxezxcl Rj Abzoag Operating hours: 19,888 h

Condition: ready for operation (used), A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible. Laedpfexxl Izex Abzeg

Condition: used, functionality: fully functional, machine/vehicle number: H2X386J14012, Year of construction: 2018, operating hours: 5,006 h, load capacity: 2,000 kg, lifting height: 4,620 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, empty load weight: 2,900 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386J14012 Lajdpfx Aezd H Nkjbzeg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2018 3rd valve, 4th valve, semi-cabin, Integrated attachment

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Lajdpfx Abjrrh T Ajzsg Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Column drill press MK 4 IBARMIA AZ 34 CE Infinitely variable speed from 50 - 2000 rpm 3-stage feed Threading device Coolant system Drive: 2.3 kW Overhang: 300 mm Laodsz A Tu Uspfx Abzsg Drilling stroke: 150 mm Quick-change drill chuck Röhm, drill vise 120 mm Table: 480 x 400 mm, rotatable Condition: almost new Dimensions: H 1.92 m, D 0.85 m, W 0.42 m Weight approx. 400 kg Can be inspected while powered on Free loading at D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 14 kg, load capacity: 3 kg, arm reach: 400 mm, Number of Axes / Scara (Horizontal Type) / 4 Axes Maximum Load Capacity / 3 kg Z-axis Stroke / 180 mm Accuracy / ±0.01 mm in the X-Y and Z axes, ±0.01° in the rotation axis Lasdpsza D Htsfx Abzsg Maximum Speed / 7200 mm/s Weight / 14 kg Environmental Protection Class / IP20 Mounting Type / Floor-mounted

Condition: used, Year of construction: 1989, x-travel 500 mm Lajdpfoh Hrvfsx Abzsg y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2013, operating hours: 3,649 h, condition: used, Machine is in working condition and maintained according to schedule. 1 fluxer and 6 pots. Will be available in coming weeks. Ask for additional information and quote! Lajdjzvcg Nspfx Abzsg

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) Lajdpfsvpalajx Abzog ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Lsdovth Auspfx Abzsag

Condition: like new (used), Year of construction: 2021, For sale is a Hammer A3-41 jointer-planer, a demonstration model with a planing length of 1800 mm. The machine has been inspected by our qualified personnel and is in like-new condition. Technical data: - 3-system cutterhead - Planing width 410 mm - Planing length 1800 mm Lajdjz Atb Dopfx Abzog - Max. feed height 225 mm - Dust extraction port Ø 120 mm - Motor power 4 kW - Year of manufacture 2021 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thicknesser, jointing, planing Reference: R-A0117

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Laodoz Dk Nlopfx Abzsg Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt).

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer Ledpfxjzz Sd Ue Abzeag USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. Ljdpfx Aoziciwsbzsag This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: D510447, Year of construction: 2004, operating hours: 4,505 h, load capacity: 3,000 kg, lifting height: 3,540 mm, construction height: 2,800 mm, fork length: 1,140 mm, overall weight: 3,020 kg, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 3,540 mm Fork length: 1,140 mm Minimum fork width: 210 mm Maximum fork width: 1,160 mm Number of wheels: 3 MACHINE DETAILS Mast type: Duplex Fuel type: Diesel Engine manufacturer: Kubota Operating hours: 4,505 h Laedjzza S Tepfx Abzeg Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,460 x 2,800 mm Unladen weight: 3,020 kg EQUIPMENT Side shift Partial cabin Pneumatic tires Work lights Documentation Operator's manual CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Laodpfsyyu S Uex Abzjg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 29,943 h, machine/vehicle number: 220495, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller model: POS 2000, working width: 3,020 mm, lower beam adjustment: 250 mm, folding beam adjustment: 80 mm, sheet thickness (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, overall weight: 4,230 kg, total length: 4,275 mm, total width: 805 mm, total height: 1,425 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2025, Equipment: documentation/manual, emergency stop, foot remote control, SCHRODER MAK3 3000x4.0 Mechanical Press Brake Year of manufacture: 2013 Capacity: 400N/mm2, 4mm CNC control: POS2000 Back gauge: 10-1000mm Work table: 3200mm, U-shaped Machine serviced by the manufacturer's service department Machine is in good working order and has been in continuous use Machine is being sold due to a change in the machine park Touchscreen display is not functioning, control via mouse only Lodpfxozkgz Hj Abzsag

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 1.000.022.855, functionality: fully functional, overall weight: 3,500 kg, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Corner rounding unit 7. Unit: Edge finishing unit 8. Unit: Brushing unit TECHNICAL DETAILS Min. edge band thickness: 0.4 mm Max. edge band thickness: 3 mm Max. edge band height: 64 mm Min. panel thickness: 10 mm Max. panel thickness: 60 mm Min. panel width: 85 mm Max. panel width: 3,200 mm Min. panel length: 140 mm Max. panel length: 3,200 mm Min. feed rate: 12 m/min Max. feed rate: 18 m/min Feed rate control: variable Max. spindle speed: 12,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 20 A Fuse rating: 32 A Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,200 x 2,200 mm Machine weight: 3,500 kg Number of transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Ljdpfjzzbcmjx Abzjag Tools for trimming unit Tools for rough milling unit Tools for corner rounding unit Tools for edge finishing unit Tools for brushing unit CE marking Documentation