Used Ics-Contec Carrera 1D Kábelfeldolgozó for sale (1,649)

Condition: excellent (used), Year of construction: 2004, This Pilot Plat has an ice condenser capacity of 100 litres and is designed to freeze-dry solids or liquids in ampoules, small bottles etc. Technical Data: Ice Condenser capacity: 12 kg Ice Condenser output: 8 g / 24 h Ice Condenser temperature: - 75° C Manufacturer: Christ Iisdow Snufopfx Apcog Year of construction: 2004 Floor Space: 130 x 130 x 200 cm + 180 x 60 x 200 cm

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: Isdjzzki Njpfx Apceig - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2009, operating hours: 10,000 h, functionality: fully functional, The FANUC M-10iA is a compact and versatile 6-axis industrial robot, ideally suited for high-speed handling, assembly, and machine loading applications. Paired with the proven R-30iA controller, this system delivers a reliable and high-performance automation solution for a wide range of production environments. With a payload capacity of up to 10 kg and a reach of 1,420 mm, the standard M-10iA covers a broad spectrum of applications. Its slim design and low weight allow for flexible integration—even in confined spaces. The high axis speed enables short cycle times, significantly boosting productivity. The repeatability is ±0.08 mm, ensuring precise and reproducible results, even in demanding applications. The R-30iA controller stands out with its rugged industrial design, high process reliability, and extensive expansion options. It supports numerous fieldbus and communication interfaces, allowing for seamless integration into existing production systems. Technical highlights: - Payload: 10 kg - Reach: 1,420 mm - 6 axes - Repeatability: ±0.08 mm - Compact design - R-30iA controller with comprehensive integration capabilities Iiodpfxsy H Ekuo Apcsg The FANUC M-10iA is the ideal solution for companies seeking a flexible, fast, and reliable automation system. Especially suited for handling, assembly, packaging, machine loading and unloading, and general production tasks. If interested, we are happy to provide further technical details or prepare a customized quotation.

Condition: excellent (used), Fam TS-1d uniformly crosscut slices a wide variety of elongated food products at high speed capacities. Cut Shapes & Sizes Cut shapes Flat cut, crinkle cut, julienne slices, halved slices Cut sizes Various cut sizes possible from 1 mm up to 40 mm Capacity Up to 4 000 kg per hour, depending on product, cutting size and condition. With platform Iedpfx Apox A A Tcscjig

Condition: used, -Dimensions: 660 x 660 x 1070 mm -Serial number: 675910 -Tank capacity: 55 litres -Chocolate holding capacity: 40 kg -10 pre-set programs -Voltage: 380V Dkedcoygtg Neu Ti Enjh -Power: 5.5 kW Iijdpfx Ajygtg Nepcog Equipped with 10 pre-set programs, the Pastochef Tronic 55-litre digital ice cream machine enables the preparation of pasteurized ice creams, custards, milk and dark chocolate tempering, storage of tempered chocolate, ganache, Bavarian cream, poached fruits, and jams. You can also program custom recipes. The Carpigiani Pastochef Tronic ice cream machine is extremely versatile: it allows the production of cream, pasteurizing of ice creams, and other pastry applications. With 10 pre-set programs, this 55-litre digital machine can prepare pasteurized ice creams, custards, milk and dark chocolate tempering, storage of tempered chocolate, ganache, Bavarian creams, poached fruits, and jams. It also offers the option to customize programs for personalized recipes.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12J10E, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: 12J10E, year of manufacture: 2010, maximum air pressure: 8.5 bar; MFR: 568 L/min; as good as new condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Iodpfozz Twcsx Apcjig Constructed of Stainless Steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price: 6.560 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. Wir sprechen Deutsch/Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, ASCO C500 Parts. We have various parts for these machines, both new and used. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. Iisdszv Idmepfx Apcog

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, input voltage: 1,200 V, Industrial paper rewinder and cutter KAMPF (KAMPF GmbH & Co., manufacturer Jagenberg-Gruppe, Germany) Technical data: • Manufacturer: KAMPF GmbH & Co., Maschinenfabrik, Wiehl (Germany) • Group: Jagenberg-Gruppe • Year of manufacture: 1989 • Serial number: 9791D • Machine type: industrial paper roll rewinder and cutter • Power supply: 3 × 400 V • Machine location: Papir – Novak s.r.o., Czech Republic Use of the machine: The machine is designed for rewinding and longitudinal cutting of roll materials, in particular: • paper, • kraft paper, • wrapping paper, • technical papers, Iodpfxsztwuvo Apcsig • other similar strip materials. Machine components: • unwinding stand for the parent roll, • main rewinding and cutting unit, • guide and transport rollers, • winding shafts, • protective cover for the cutting section, • control panel, • mechanical tensioning using an Ortlinghaus clutch. Machine condition: • mechanically complete, • the machine was dismantled from operation and stored in a dry warehouse for a long time, • the unwinding stand is included, • the control panel is installed, • functionality has not been verified – the machine is untested, • it is sold in its current condition, • suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible Iiedpfx Aozx Ri Depcog • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Year of construction: 2015, condition: reconditioned (used), functionality: fully functional, Carpigiani 381 psp Nyrenoverad , pastoresering, 3 fas , vattenkyld Iodpfxsxn Twpj Apcjig

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), gearing type: hydrostat, Year of construction: 2005, operating hours: 3,102 h, Equipment: all wheel drive, Iceresurfacer: + Dupon + OKAY 3000 + 4-cylinder VW gas engine, 75 HP + All-wheel drive + Hydrostatic drive + Snow tank + Water tank + Side broom + Rink board limiter + Augers / blades Iiedpfx Apey Enw Ujcog + Year of manufacture: 2005 + 3,102 operating hours Municipal vehicle from first owner. Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. Iiedpfxsx Sygho Apcog It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Iiodpfozuaprex Apcsg ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Iodpozp Hkxsfx Apcjig Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Ott frezzer st1 psp Nyrenoverad. Pastoreserande, 3fas , vattenkyld. Iisdpsxn Tvrjfx Apcog

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results Ijdpfx Aszwd Hyjpceig High sensitivity and wide dynamic range Designed for industrial and laboratory use Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-201-76-6720, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Iodpfxjxw H Tcj Apcoig Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, overall weight: 40 kg, load capacity: 10 kg, controller model: R-30iB Mini Plus, The FANUC CRX-10iA is a modern, collaborative lightweight robot (cobot) characterized by ease of operation, high reliability, and maximum safety. Combined with the powerful R-30iB Mini Plus controller, this system provides a flexible and cost-effective solution for diverse automation tasks in both industrial and craft sectors. With a payload of up to 10 kg and a reach of 1,249 mm, the CRX-10iA is ideal for applications such as machine tending, assembly, material handling, packaging, palletizing, or quality inspection. Thanks to its integrated safety features, the robot can operate directly alongside human workers without a safety fence (depending on risk assessment). Programming is intuitive, either via the user-friendly touch tablet or guided by hand (drag & drop function). Even users without in-depth robotics knowledge can rapidly create and adapt programs. Proven FANUC technology ensures the highest precision, repeatability, and a long service life. Technical Highlights: - Payload: 10 kg - Reach: 1,249 mm - 6 axes Iijdpfsy Hp I Dex Apcsg - Repeatability: ±0.04 mm - Protection class: IP67 (robot arm) - Collaborative operation with integrated force and torque monitoring - R-30iB Mini Plus controller with a modern user interface The FANUC CRX-10iA stands out with its fast commissioning, low maintenance requirements, and flexible deployment options. It is ideal for companies looking to efficiently automate production or optimize existing processes.

Condition: good (used), Year of construction: 2020, operating hours: 340 h, Technical specifications: • Year of manufacture: 08/2020 • Operating hours: 340 • Dry ice capacity: 18.2 kg Isdpfjywawwex Apceig • Feed rate: 0–2 kg/min • Dimensions: 91.4 × 50.8 × 101.6 cm • Weight: approx. 117 kg • Air consumption: 1.4–4.7 m³/min at 5.5 bar • Blasting pressure range: 1.4–17.2 bar Includes hose package, gun, and round nozzle. Net price plus 19% VAT.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW Iiodpfxswrp Emj Apcsg - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: excellent (used), - Dimensions: 610x1150x1460 mm - Model: TRT 120 - Production per cycle: max. 20 litres + Mixing per cycle: 8 to 16 kg - Theoretical hourly production: 75 to 120 litres/hour - Operating ambient temperature: 16°C to 3°C - Air cooling - Pasto multifunction turbine - Weight: 510 kg Ijdpowxu Rujfx Apcsig - Voltage: 380V

Condition: refurbished (used), We are selling a used ice cream freezer from our service department. It has a production capacity of 35 kg/hour and a batch capacity of 3-6 kg. It features a new drive, new bearings, a spare factory seal, new scraper blades, and a new discharge window. Reliable service and spare parts availability guaranteed! Iiodpjzmzf Eefx Apcjg

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges Iisdpjzu I U Asfx Apcjg C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: excellent (used), Fin mjukglassmaskin, nyservad o genomgången. Med luftpump. Vattenkyld 3fas 400 v Isdpfoyc E Svox Apceig

Condition: excellent (used), - Dimensions: 518x760x1420mm - Flavours: 2 and mixed - Output: 17-18L/h - Voltage: 220V - Power: 1.7KW Iiedpfx Apjwxu Sroceg - Net weight: 143kg