Used Homag Pse 411 C for sale (56,089)

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Iedpfx Akorl Utbexjia Max Panel Length: 55 mm

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm Iisdpfx Aksy A I Sgsxja - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 1-056-09-3351 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8 kg - Dimensions: 46x39x27 cm - If interested, we offer an overhaul service. Please contact us. Ijdeyztt Hopfx Akxoia

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 2-056-10-0220 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 6KG - Dimensions: 36X26X21 - If interested, we offer an overhaul service; please contact us. Iijdpfx Ajyztr Aekxoa

Year of construction: 2026, condition: new, Complete turnkey production lines for slitting, cut to length, combined slitting-cut to length and press feeding systems. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. We provide complete turnkey coil processing lines designed for modern sheet metal production facilities. Our solutions cover the full process from coil loading and feeding to cutting, recoiling, stacking and automation. Whether for new factory investments, capacity expansion or modernization projects, Bosporas offers reliable, efficient and customized production lines tailored to your material specifications, production targets and factory layout. From standalone machines to fully integrated automatic systems, we deliver complete engineering solutions with international project experience. ⚙️ AVAILABLE SOLUTIONS Coil Slitting Lines: For precise longitudinal cutting of coils into narrower strips with recoiling solutions. Cut to Length Lines: For accurate sheet cutting with stacking systems for flat sheet production. Combined Slitting & Cut to Length Lines: Flexible systems capable of both slitting coils and producing cut sheets in one integrated line. Compact Press Feeding Systems: Integrated decoiler, straightener and servo feeder solutions for press automation and stamping operations. 🔧 LINE CONFIGURATION Depending on the project, production lines may include: Hydraulic Coil Loading Car Ijdpfx Akjy A Ia Doxeia Decoiler / Uncoiler Systems Straightener / Leveler Units Servo Feeder Systems Slitting Head Rotary / Hydraulic / Mechanical Shear Scrap Winder Systems Tension & Separator Units Recoiler Systems Automatic Stacking Systems Conveyor Systems PLC & HMI Automation Safety Systems & CE Compliance Options ⚙️ ENGINEERING FEATURES Custom machine design according to customer requirements High precision processing performance Heavy-duty machine construction Servo-controlled feeding and automation Modular structure for future upgrades User-friendly control systems Reliable operation for continuous industrial production ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions Single supplier for the full project Reduced labor and production costs High efficiency and consistent product quality Fast installation and commissioning support Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal processing companies Automotive suppliers White goods industry Construction materials production HVAC manufacturers Metal furniture and component production General industrial manufacturing 🧩 OPTIONAL CONFIGURATIONS Customized line capacities Different thickness and width ranges Full automation packages Factory layout engineering Remote support solutions Spare parts and training packages 📸 REFERENCE PROJECTS You can see and review our completed (manufactured and installed) projects on our Youtube channel. For machine videos and references, please visit our YouTube channel. You can search on Youtube as Bosporas Makina / Ayika Group.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Iodpfx Ajxvy Ukskxeia Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: used, Year of construction: 1996, Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps. Additional title: aluminum screw caps Capacity approx.: 20000 bottles/h Length: 1,9 m Width: 1,25 m Height: 2.2 m Iisdpeyzh Ixofx Akxja Features: 8 capping heads

Condition: good (used), Strapping machine, strapping kit, tensioning and sealing device, textile strapping kit, steel strapping kit, steel strap tensioner -Manufacturer: Signode, Textile strapping set 19 mm with tensioning device and dispenser accessories -Tape dispenser: DF 9 -Span: PFH Tensioner 3/4 - 1-1/4" -Closing device: C5823 -Staples/Reel tensioners/Individual components: see photos Iodsyzf Rwopfx Akxeia -Transport dimensions: 650/550/H990 mm -Total weight: 67 kg

Condition: used, functionality: fully functional, Year of construction: 2008, Used Darley guillotine shear Type GS 4113 CL Iiodpjyzf Euefx Akxea Capacity 4050 x 13 mm Year of manufacture 2008

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used 4-meter guillotine shear by Darley Model: GS 4113 CL Capacity: 4100 x 113 mm Isdpfx Akeyzd Ihjxsia Delem DAC 350 CNC control CNC backgauge High support table Year of construction: 2008

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Iijdpfoy Any Rsx Akxja Web Width: 80 – 200 mm Flange: 40 – 60 mm Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: excellent (used), Year of construction: 2010, FEATURES: Special equipment with nesting Max. glued edge thickness 20 mm Max. glue height 60 mm Max. rolled material thickness 3 mm Min. workpiece width 60 mm Max. feed rate m/n 25 m/min Stepless feed Electric height adjustment Top belt pressure Preheating zone Glue granule system with pre-melt container Glue container changeable/variable Spraying device Assembly milling unit End milling unit 2 motors Flush/radial/chamfering milling stations 1 Corner copying unit 2 motors Edge scraper: profile and flat Polishing unit Strip magazine Synchronized units NC axis(s) Machine version left-hand side Quick change unit(s) Iedpoukrthsfx Akxoia HOMAG Infeed device 2 rollers HOMAG A 20 gluing unit HOMAG HL 84 HOMAG FK 11 HOMAG PN 10 Profile scraping unit HOMAG FA 11 finishing unit Control PowerControl PC 22 Weight 5,000 kg Machine length 7845 mm CE regulations NEW CHAINS INCLUDES: PREPARATION AND LOADING IN CUSTOMER TRANSPORT DOES NOT INCLUDE: TRANSPORT, ASSEMBLY, START-UP

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Iedpfxjvz U Erj Akxjia Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Iiodpfex Ei Sysx Akxsa

Condition: used, Year of construction: 2008, total height: 1,800 mm, total length: 10,000 mm, total width: 2,200 mm, Weight: 5.500 kg Isdpfx Akoychw Ijxeia - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10000mm x 2200mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Price: On request - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - - Type/Brand: Nordson - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Rough milling unit - └ 5th unit type: Cap unit - └ 6th unit type: Fine milling unit Iisdsyrpvwopfx Akxea - Voltage [V]: 400 - Current consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested Iiodpfx Aoyrp Uaokxoa - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2007, condition: used, Empty weight: 430 kg Dimensions (LxBxH): 280 x 180 x 247 cm - Year: 2007 - Documentation available: No - CE certificate present: No - Serial number: 070118M - Transport dimensions: 2800mm x 1800mm x 2470mm (l x w x h) - Transport weight [kg]: 430kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Iodpfx Asyr Rr Hekxeia

Condition: not inspected (used), Year of construction: 1997, Attention: Sale on behalf of the seller ● Serial number: CMM970103039 ● Availability: By arrangement ● Payment terms: Advance payment – by bank transfer ● Internal no.: S3 Technical data: ● Measuring range X/Y/Z: 500/550/515 mm Scope of delivery: ● Available manuals ● Available measuring accessories as shown in the pictures Dimensions & weight: ● Installation dimensions L x W x H approx.: 1500 x 1500 x 2400 mm ● Weight approx.: 1000 kg Additional notes: ► On request, we can offer transport to the place of destination ► The offer price is net, plus VAT ► Goods are sold with exclusion of any warranty ► Technical data subject to change without notice ► Subject to prior sale Iodpfx Aksyyx Tpexjia ❗ Sale exclusively to businesses ❗

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Iiodpfx Asyywcvskxoa Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) Iiedpfx Aeyyvttokxoa No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Iodpfjyyvp Ujx Akxsia Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Iodpfxevnq H Es Akxjia Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Iiodpfx Aksd Sm Diexsa Max temperature: 700 C °

Condition: good (used), Year of construction: 2003, machine/vehicle number: 0-201-22-4227, functionality: limited functionality, workpiece length (max.): 4,800 mm, workpiece height (max.): 80 mm, number of slots in tool magazine: 18, spindle motor power: 7,500 W, number of spindles: 2, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 18,000 rpm, Equipment: rotational speed infinitely variable, Main spindle equipped with C axis and extension for Flex 5 aggregate. Working area X: 4800 mm. Working area Y: 1300 mm. Working area Z: 80 mm. 8 consoles. 1 vacuum pump. 18-position travelling tool changer. Tool holder HSK 63. Adapter - horizontal boring head with 4 fixed spindles. Boring head with 17 spindles. Additional spindle with collet chuck. Measuring probe. Central automatic oil lubrication. Lifting rails for console table. Iisdpfx Akoxdxa Iexja