Used Holex Thread Cutting Chuck, 7 Pieces for sale (48,985)

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS NEW, NEVER USED Gbjdpjqpf T Iofx Abgon Main Demensions: 425 x 700 x 150 mm Weight 216 kg 2 units available WAREHOUSE LIQUIDATION

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK NEW, NEVER USED Godjqpfvbepfx Abgjbn Main Demensions: 374,65 x 501,65 x 250,83 mm Weight 156 kg 3 units available WAREHOUSE LIQUIDATION

Condition: good (used), Thread cutting machine, pipe thread cutter Gjdpfx Aeb A Iyaobgjbn -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: excellent (used), thread dia. 36 mm Gbjdpfsyhq S Esx Abgjn

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Gbjdpfxekhmgij Abgen Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Godpfxjpag Npj Abgjbn Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Gjdpfx Abspag R Rsgjbn Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Gbedpexf Uwxsfx Abgjn Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Maximum tube length: Gjdpfxow I In Re Abgsbn

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. Gjdpfsmn Thhjx Abgjbn In top condition, like new.

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7 Gjdpfeymaypox Abgebn

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Gbedpsymax Eefx Abgjn Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads Gsdpfeymaw Usx Abgebn - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm Gbjdpfx Absx I Agpogsn -Weight: 46.6 kg

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1024JT05VL, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, working range: 2,000 mm, overall weight: 19 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 500 rpm, throat depth: 2,000 mm, table height: 870 mm, table width: 800 mm, table length: 600 mm, Equipment: documentation/manual, VOLUMEC JoyTap 3150 - Thread cutting unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for Joytap - Supportive control for thread cutting 1. NEW ALUMINUM STRUCTURE developed with EXCLUSIVE Volumec profile, which provides greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for more smoothness and power 3. NEW GENERATION BRUSHLESS MOTOR (G2) with unmatched performance and reliability 4. INTEGRATED WIRING that does not limit mobility 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and thread cutting, updated with new functions and programmable torque (Nm) 6. MULTIDIRECTIONAL HEAD with automatic fixation 0-90° workpiece orientation 7. QUICK-CHANGE COUPLING SPINDLE THREAD CUTTING: • AUTOMATIC THREAD CUTTING (setting of pitch - depth - speed - torque Nm to protect the tools) • THREAD CUTTING with PROGRAMMABLE chip breakage Gedpsvr U Unofx Abgobn • MANUAL THREAD CUTTING (set speed - torque (Nm) to protect the tools) • THREAD COUNTING is carried out • PROGRAM MEMORY, password protected • Simple PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring applications • CONSTANT SPEED AND TORQUE when thread cutting thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made of milled steel and T-slots in the inner compartment

Condition: good (used), Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete Gbjdpfjh Uhkwex Abgon -Total weight: 1.1 kg

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: extensions / adapter sleeves MK6 -Type: SWN 136/29 MK6-MK6 / MK6-MK5 / MK6-MK4 -Dimensions/Quantity: see photos -Transport dimensions: 500/480/H95 mm -Weight: 50.7 kg Gbodpjx R Sy Rsfx Abgsn

Condition: new, Year of construction: 2024, thread dia. bis M 16 mm turning speeds 0 - 600 U/min thread M5 - M16 working area 2050 Rmax. working area 500 Rmin. table surface area 900 mm Godpfxou Ag Rao Abgjbn engine output 3,0 kW weight ca. 250 kg

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees Gedpfx Aog N Nl Ijbgjbn - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Gsdjg N Nl Dspfx Abgebn Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: good (used), quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert -Quick-change chuck holders: 18 pieces, without: arbor -2x sleeve: MK1 -7x sleeve: MK2 -6x sleeve: MK3 Gbodpjwa Invjfx Abgon -3x sleeve: MK4 -Mounting: Ø 42 mm -Price/Delivery: complete -Transport dimensions: 300/200/H170 mm -Complete weight: 21 kg

Condition: used, Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars Gbodeh Uhk Tspfx Abgen -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Condition: used, Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available Gedsh Uhl Uspfx Abgebn -Total Cost -Total weight: 1.1kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch Gbsdpjb A Rxcjfx Abgen -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

Condition: good (used), Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm Gjdpfx Absb D I Dyjgebn -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg