Used Hermle C 30 Up Dynamic for sale (77,531)

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Infeed opening approx. 500 x 490 mm Itedsyr Tqrspfx Afkjh Drive motor: 22 kW

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Iodsy Eyhrjpfx Afksth Max height approx. 200 mm, 3 knives, 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Iedpfx Afjwhvrrjkoth Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: excellent (used), functionality: fully functional, Alco Food Machines Complete Vacuum Mixing Line Iedpfx Afoy Agq Ijkjth The installation includes an advanced vacuum mixer, a dedicated vacuum generation system, and an automatic loading mast lift. 1. Alco Food Machines Twin-Shaft Paddle Mixer Type: AMP 1700N-D-HP Serial Number: 01153221 Year of Manufacture: 2010 Voltage: 400 V / 50 Hz Current and Power: 100 A / 31 kW Weight: 2,200 kg Overall Dimensions: 3,700 mm x 1,800 mm x 2,850 mm 2. Alco Vacuum System (components): Sterling Fluid Systems Vacuum Unit (Type PLN 425 Y MM): Year 2010, capacity 18,900 m³/h, suction pressure 10 mbar. Prang Heat Exchanger (Type WT-36-50-2): Year 2010. Sterling SIHI GmbH Separator: Year 2010. Overall vacuum system dimensions: 3,500 mm x 1,100 mm x 2,850 mm 3. NAWI BV Column Lifter for 200-litre Bins: Type: 9258 Serial Number: 21984 Year of Manufacture: 2001 Overall Dimensions: 1,300 mm x 1,000 mm x 3,000 mm The Alco Food Machines complete mixing line is a high-performance system designed for standardizing and mixing meat masses and other food products under vacuum conditions. The use of vacuum technology enables better protein binding, improved product structure, elimination of air bubbles, and extended microbiological shelf life of the finished product. The twin-shaft paddle system ensures fast and extremely precise distribution of additives while gently treating the raw materials. Equipped with the powerful Sterling vacuum system and NAWI column lifter, the set forms a fully integrated process workstation, ready for operation in large-scale food processing facilities.

Year of construction: 2024, condition: as good as new (ex-display), Rolleri C-UP-1500 EVO support bar cleaner for cleaning support plates on flatbed laser systems Milling cutter with pneumatic traction device for bridge width 3 and 4 mm Handle length 2000 mm for laser systems with 2000 mm working width Itedpfx Afjwtqqyjkeh Demonstration unit

Condition: excellent (used), Year of construction: 2016, volume flow: 3.62 m³/h, operating pressure: 8 bar, Boge C 30 FD Screw Compressor Variable speed (inverter-controlled) With refrigerant dryer Iedpfxeywz Hme Afkoth Motor: 22 kW Output: 3.62 m³/min Pressure: 8 bar Year of manufacture: 2016 Operating hours: 11,260 h COMPRESSOR IN FULL WORKING ORDER.

Condition: used, Year of construction: 1996, Manufacturer: Cruells Cruells Model: C30 Year: 1996 Type : cutter   Bowl volume: 30 L Number of knives : 3 Weight : 210 Kg Hinged lid Itodpfx Ajygbadjfkjh

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies Itjdpfx Afjrxw E Nekeh -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Condition: good (used), Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: pilz, safety relay safety switching device from vertical lathe Scherer VDZ 80 DS -Type: PNOZ XV3.1 30/24VDC 3n/o 1n/c 2n/o1 Itsdpovun Itsfx Afkoh .: 774530 102997 -Number: 1x relay available -Dimensions: 90/90/H120 mm -Weight: 0.6 kg

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 30 rpm -Performance: TA = 0.06KPM -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 Ijdsc U Hg Iopfx Afkjth -Number: 1x motors available -Price: per piece -Dimensions: 360/170/H175 mm -Weight: 14.2 kg

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 760 mm z-travel 660 mm control Mazatrol M Plus table surface area 2000 x 760 mm table load 1,0 t rapid traverse 24 m/min turning speed range 7000 U/min power capacity - milling spindle 11 kW tool taper SK 40 | | no. of tools in the magazine 2 x 24 Stück Ijdsh Hgmzepfx Afkjth weight of the machine ca. 8,1 t dimensions 4,2 x 3,2 x 2,8 m Vertical Machining Center traveling coloumn - internal coolant - chipconveyor - ext, hand wheel

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Dimensions (L x W x H): 790 x 670 x 520 mm Weight: approx. 60 kg Itsdpfx Aoxciugofkoh Good condition

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Itedpfxjw S E N To Afksh Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Iedpfswc Nvgox Afketh Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Itodpfxerbiyfe Afkjh Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Iodpfx Ajvrxd Hsfketh Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: used, C 30 VRT, Ulvac, compressor unit Model: C 30 VRT Condition: Used Iodpfsuizmmjx Afkjth

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning length: 750 mm, turning diameter: 330 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 750 mm Turning diameter: 330 mm Diameter over cross slide: 160 mm Spindle bore: 43 mm Maximum spindle speed: 4,500 rpm MACHINE DETAILS Itedpfx Ajxf Hiasfkoh Control: Siemens EQUIPMENT Collets Jaws Tool holder

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, PLASMA CUTTING POWER SOURCE THERMAL DYNAMICS ULTRA-CUT 300 PS High-precision plasma cutting system, 300 amps, high-quality Japanese manufacturing. ═════ TECHNICAL DATA ═════ Iedpoy U Ianjfx Afkoth - Brand: Thermal Dynamics (ESAB / Victor Technologies) - Model: Ultra-Cut 300 PS - Year of manufacture: 2013 - Cutting current: 10-300 A - Output voltage: 84-200 V - Duty cycle: 100% at 300 A - Power supply: 380V three-phase, 50/60 Hz - Made in Japan - Serial number: JP13D6015679 - Standard: EN 60974-1, CE ═════ INCLUDES ═════ - Ultra-Cut 300 PS power source - DMC-3000 digital control module - iControl module - Torch and hoses - Connection cables ═════ CONDITION ═════ - From an industrial company in liquidation - Good cosmetic and operational condition - [Operational, with start-up video / Sold as is, verification possible before removal] - DOES NOT include CNC cutting table (only the power source and accessories are sold) ═════ CONDITIONS ═════ - Price: €9,500 (negotiable) - VAT not included / VAT as per regulations - Location: [Your city], Spain - Collection by the buyer or shipment to be agreed upon - Payment: bank transfer Thermal Dynamics is a world-leading brand in plasma cutting, chosen by professional contractors and manufacturers. Robust model for cutting steel up to 50mm, stainless steel, and aluminum. Spare parts available through ESAB. Inquiries and more photos: by message.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15744, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, table load: 1,500 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Table length: 1,000 mm Table width: 560 mm Table load: max. 1,500 kg Spindle connection: HSK63 Tool changer: 30 positions Rapid traverse rate: 35 m/min Acceleration: 5 m/s² MACHINE DETAILS Control system: Heidenhain iTNC 530 Iodszcymzopfx Afksth Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,500 x 2,800 mm Weight: 7,200 kg Total connected load (including cooling unit): 42 kVA

Condition: used, Year of construction: 2007, operating hours: 33,122 h, Hermle simultaneous 5-axis CNC machining center Type/Model: U 1130 Condition: Used Year of manufacture: 2007 Operating hours: 33,122 h Spindle hours: 12,054 h Technical data: Travel range X/Y/Z: 1130 (1300) mm x 720 mm x 630 mm Feed rate: Manual / setup mode: 1 - 2000 mm/min Programmable X-Y axis: 1 - 30000 mm/min Programmable Z axis: 1 - 20000 mm/min Rotary table: Tool interface: SK 40 Total connected load: 32 kW Itodpfx Aezfg U Nofkoh Space requirement (L/W/H) approx.: 3.66 m x 4.38 m x 2.57 m Weight approx.: approx. 10 tons Equipment: - Heidenhain iTNC 530 control system - Heidenhain TS 640 infrared measuring probe - 16-position tool changer - incl. SK 40 tool interface plus various tools - Machine vise - IKZ (internal coolant supply) - Paper band filter - Oil cooler - Chip conveyor - Control cabinet air conditioning - RS 232 interface - LAN interface Costs for delivery by freight forwarder to the curb, see shopping cart or individual offer for inquiry items.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 11,845 h, load capacity: 3,000 kg, lifting height: 3,650 mm, fuel type: diesel, mast type: duplex, construction height: 2,470 mm, power: 36 kW (48.95 HP), drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: LINDE H30 EVO diesel forklift - - 3-ton lifting capacity - - Year of manufacture: 2018 - - 11,845 operating hours according to display - - - DUPLEX free-lift mast - - Side shifter - - Fork positioner - - Overall height: 2.47m - - Lifting height: 3.65m - - 4-cylinder VW turbo diesel engine, 36 kW - - Semi-cab, lighting system, work lights - - Tires: Solid rubber, front: 90%, rear: 60% - - 3rd valve, 4th valve - - - Original paint - - Good original condition - - Dual pedal design - - New seat cushion Side shifter, fork positioner, Itsdpfx Afjzdmkuekoh 3rd valve, 4th valve, rear work lights, windshield, semi-cab, Semi-cab with front and rear windshield - - Lighting system - - Rear headlights - - Dual pedal design - - New seat cushion

Condition: used, Year of construction: 1997, Hermle 3-axis universal CNC milling machine Type/Model U 630 T Condition: Used Year of manufacture: 1997 Technical data: Tool holder: SK 40 Tool changer: 16-position Travel ranges X/Y/Z: 630 mm x 500 mm x 500 mm Spindle speed range: max. 4000 rpm Quill stroke: 75 mm Work table Clamping area: 900 x 528 mm Max. load: 400 kg Total connected load: 14 kW Control system: Heidenhain TNC 430 Dimensions L/W/H approx. 2.30 m x 2.10 m x 2.10 m Weight approx. 4,800 kg Isdezdf Hpspfx Afkjth Equipment: - Drilling quill - 3 + 1 axis, swiveling head - Machine vice - 16-position tool holder incl. tools

Condition: good (used), Schmedt PraGnant HHS 30 Hot Foil Stamping Machine The machine is in very good condition and ready to use. 230V power supply. The machine features a worktop with margins, adjustable embossing depth, and a line guide. Iedpfjzdaubex Afkjth Machine weight: 30 kg

Condition: used, mileage: 2,500 km, first registration: 07/2024, fuel type: gasoline, gearing type: automatic, Year of construction: 2024, Unladen weight: 163 kg Iodpfx Afjzfgi Toksth Damage: none License plate: 21-MV-LP