Used Heating System For Wood Chips for sale (46,677)

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Ncjdpex Daw Uofx Afajr Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Nodpfx Aowp Rqfofaocr Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation. Ncjdpfx Afetmtf Reaor

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm rotor width 450 mm Nodpfx Afslx Ndloascr

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Boiler with a heating output of 200 kW TYPE RRK 150 Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves Ncsdpfxexalfie Afajr

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Ncsdpfxod Dzahs Afajr 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter Njdpfeff Hgbjx Afaocr connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Nsdpfx Asp N H Husfajcr Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. Ncsdpfxeff Hf De Afaer * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55 Nsdpfx Afsd Dy S Rjajcr

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Height: approx. 280 mm Screw diameter: approx. 180 mm Nsdpsw Rpygefx Afaecr Motor: 1.1 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25743, smoke pipe connection diameter: 600 mm, space requirement length: 20,000 mm, space requirement height: 6,000 mm, space requirement width: 12,000 mm, temperature: 110 °C, Mawera FSB1100 biomass heater with flat sliding grate With 1100 kW output, year of construction: 2007, general condition: very good. Complete with hydraulic insert incl. hydraulics, combustion chamber, heat exchanger, with all blowers, air preheating, flue gas recirculation, hydraulics for combustion grate and automatic pressure cleaning, multicyclone, automatic ash discharge with gravity discharge, flue gas fan and piping to chimney connection, control system, operating instructions. Silo discharge from push rods is also included. Inspection possible by prior appointment. Still in operation, dismantling in August 2024. Several pictures, videos on request. Ncodpfx Ajtu Nt Defaer

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Ncodpfx Afeb Evnkeaor A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Condition: refurbished (used), heating capacity: 400 kW (543.85 HP), space requirement length: 4,500 mm, space requirement height: 3,300 mm, space requirement width: 1,400 mm, Warranty on heat exchanger + refractory lining Boiler (heat exchanger + refractory lining renewed) Stoker screw Backfire damper Secondary air blower Primary air blower Flue gas blower Ncsdpfx Afjrp Dvgoasr Hydraulic unit with cylinder Flue gas pipes ( new ) Multicyclone ( New ) Electrical cabinet computer Complete documentation / operating instructions

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Ncedpfx Ask S Dw Esfasr Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: used, Year of construction: 2018, functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Ncodpfx Afev Uz Efjaor Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: good (used), QUICK WOOD RO800 structuring brush machine or intermediate sanding machine Working width 700 mm, working height 200 mm 2x4 special brushes Brush rotation speed control Rotation speed control for the 2 blocks of 4 brushes each Nedpfxeyk H Eaj Afaecr Feed speed adjustment Electric adjustment of the spacing of the 2 conveyor belts Electric raising and lowering of the brushes

Condition: ready for operation (used), working width 1300mm Nodpfx Afetzllrjaecr rotor with 4 brushes edge brush additional outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed electric regulation of rotor connection 380v

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts Nedpfx Afsv D Uz Eeaecr - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: ready for operation (used), Year of construction: 2004, I sell the 3-side brushing machine Quickwood CD2-1300, Year 2004. 2 pcs. Surface brushes from top 2 pcs. Side brushes Nedpfx Afjvylmqjaocr Working width 1300mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy With full Documentation. Available immediately.

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Working width 1060mm Nodpfxsf Rth Tj Afascr Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Condition: good (used), Year of construction: 2001, Quickwood Rustication / Brushing Line on 03 sides with 02 brushes per side Ncodovy Eu Iopfx Afajr

Condition: excellent (used), Year of construction: 2004, grinding height: 100 mm, working width: 250 mm, grinding width: 250 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Pneumatically controlled pressure rollers for workpiece guidance and stabilization Feed rate steplessly adjustable, approx. 5 - 25 m/min Nodpfx Ajxvz Ulofajcr Extraction connections: 150 mm Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Stable, continuous operation High and consistent granulate quality Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Njdpoy Eyrdefx Afaecr Fast return on investment Reduced material losses Reliable and long service life Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 2,800 mm, total width: 410 mm, overall weight: 800 kg, operating hours: 50 h, We offer this very good Griggio Tornado Limited Edition thickness planer, year of construction 1999. Njdpsyz Tmmefx Afaocr If you have any questions or need more information, feel free to send us a message or give us a call.