Used Fritsch Cutting Table/Line for sale (32,779)

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Godpfjwnww Nsx Ankjub

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min Guodsywdx Sspfx Ankob - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW Godpfx Aox H Uaxjnksub

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires Gjdpfxov Hm A Tj Anksub - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Gusdpeyv Ewmefx Ankob Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: used, Year of construction: 2019, Year: 2019 Guedpfxeyv Eppe Ankjb Condition: operational - Still in production, inspection possible Configuration: - Automatic pallet exchange - When a pallet is completed, the system automatically ejects it to the side output and feeds a new pallet from the infeed track - Automatic sheet feeding and counting - Automatic jogging and aeration - Automatic air removal from the pile - Automatic feeding into the airboard loader - Automatic loading of airboards - Automatic unloading of the pile onto a pallet, including airboards Basic functions of the BASA system: - Automatically loads materials from a pallet - The transport system allows sequential loading from 2 pallets arranged in line; the empty pallet is automatically ejected - Counts / deducts the exact number of sheets - Jogs, aligns, aerates, and presses the piles - Places jogged piles onto separator cardboard - Subsequently separates piles using an airboard - Unloads piles onto a pallet - The BASA system only requires an operator to input or select a job in the system and to supply full pallets and remove empty ones - In off-line mode, the system can “feed” 2–3 cutting machines depending on the material used and pallet loading quality Technical specifications: - Max. format: 770 × 1070 mm - Min. format: 700 × 650 mm - Sheet counter: GTS

Condition: excellent (used), Year of construction: 2022, Vetromac SA 33-26 Cutting table for Glas Max. workable Size: 3.300 x 2.600 mm Thickness: 2-19 mm Speed: 0-180 m/min Gedeyn Dqnopfx Anksub Options: - tilting arms - Operatorpanel incl. Software

Condition: excellent (used), Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, total length: 45,000 mm, AMIX Line for Thin Log Processing – Pallet Cut Stock Production (IN OPERATION) For sale: Fully functional and well-maintained AMIX saw line (Poland), designed for efficient thin log processing and the production of pallet cut stock / pallet components. --- 📏 Input material: - Diameter: 8 – 45 cm - Length: 2 – 4.5 m --- ⚙️ The line includes: - Automatic loading deck (6 m × 3 m) - Log turner (for log straightening) - Twin edger saw 2 × 30 kW with chipper system - Automatic side board, slab, and waste separation - Conveyor system for side boards and waney lumber - Automatic prism separator - Centering conveyor for prisms - Multirip saw 75 kW - Automatic take-off conveyor after multirip saw - Belt conveyor (width 2.5 m, length 4 m) - Cross-cut saw (4-blade) - Edger saw (2-shaft) - Material separation after edger saw - Complete conveyor system for chip and waste extraction 👉 Wood chipper is not included in the offer Gsdpfx Asyvlrkonkjub --- ✅ Key advantages: - Very compact and efficient solution - Optimized for thin log processing - Ideal for pallet cut stock production - Automated material flow - Low manning requirements (3–4 operators) --- 🚀 Output: - approx. 40 – 60 m³ per 8-hour shift (depends on log diameter and material quality) --- 🔧 Condition: - Line currently in operation - Possibility to see the actual production and performance - Regularly maintained --- 💰 Price: €130,000 (price negotiable for serious enquires) 📍 Location: Slovakia For further information, photos, videos or to arrange an inspection, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* Godpfjv Ucbnjx Anksub - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Guedpfeihf Tpsx Ankob Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO Guedpfxethg Dio Ankob YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Gjdpfx Anoixqg Nskeub Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: excellent (used), maximum cutting width 250 mm feed table length 3 m outfeed table length 3 m year of manufacture 2003 motor power approx. 2.2 kW power supply 400 V weight 600 kg Guedpfeyudbgsx Ankob

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t mandrel Ø: 508 mm Gjdjnfu Icopfx Ankeub No. of slits: max. 9

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm coil weight: 40 t coil ID: 508/610 mm Guodpfx Aeqw Aacjnksb

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm Guedpfx Asqw Akmjnksb coil weight: 10 t

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. Gedpfeqlbpgox Ankeub As an option we can offer used machines for your requirements. Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery

Condition: used, Year of construction: 1990, Manufacturer: SALICO S.P.A. Year: 1990 Godpsurlakofx Ankeub Thicknesses: 3-13.5mm Coil capacity: 25t Coil width:320-1250mm Direction: Left-Right Sizes of line: 17x13m Maximum external diameter: 2000mm Minimum external diameter: 700mm Minimum internal hole of coil:500mm Maximum internal hole of coils: 600mm Knife diameters: Max 460, Min 410mm Absolute number of cuts 15 Number of cuts with maximum thcikness 13.5mm: 3 cuts for hard material, 5 cuts for mild material.

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Gujdpfxsq Ulh Hs Ankjb Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear Guedpfx Ajtvdy Ionksb 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Gsdpfx Asttlfksnkoub Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser Gusdpfsw Uptzsx Anksb • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm Guedegnc H Dspfx Ankjb strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system Gsdpfx Aoypvdisnkoub 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 77731, Band Slicing Machine Kronen GS 10 This band slicer with an extended infeed belt from Kronen is ideal for slicing vegetables and fruit. Thanks to the wide range of blades, the machine can cut slices, strips, and cubes. It is also possible to “slice” pulled meat using the specially designed pulled-meat knife. This slicer is highly suitable for salad, (leafy) vegetables, fruit, herbs, meat, fish, sausage, bread, cheese, nuts, and much more. It is ideal for use in large kitchens, catering, fresh-produce specialty shops, and industrial applications. Various cutting accessories are available for a wide range of applications. The easily adjustable control panel allows for quick product changes. The belt speed and blade speed are infinitely adjustable (frequency-controlled), enabling even delicate products to be cut effortlessly. This industrial slicing machine is made entirely of stainless steel. Specifications: • Production capacity: 1500 kg/h (depending on product and cut size) • Working width: 125 mm • Cut size: 1 mm – 45 mm • Cutting types: slices, strips, cubes, grating, pulled meat • Included blade: slicing blade 4 mm • Infeed height: 890 mm Gujdpfx Anox A Sg Ejkeb • Outfeed height: 610 mm • Voltage: 230V (3+N, 50Hz) • Power: 1.8 kW • Weight: 260 kg • Machine dimensions (W x D x H): 2530 × 650 × 1390 mm