Used Forstner Cut-To-Length And Slitting Line for sale (57,515)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car Hnodjztykgjpfx Agtjt - 4-fold turnstile

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw - Feeding system with transverse conveyors and automatic pusher Hnedpfx Aozkbmdjgtjt - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Hedpfozxdqzsx Agtent Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Year of construction: 2020, condition: like new (used), functionality: fully functional, For sale: A.Celli Nonwovens Stream In Line, manufactured in 2020 Industrial in-line winding and slitting system designed for the processing of nonwoven materials. Machine details: Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream In Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 CE marked Country of manufacture: Italy Hsdpfx Agezudfdotent The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. The system includes the main machine structure, winding and roller assemblies, drives and associated machine components. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22 Hnodpfxoy Hcd Se Agtet

Condition: excellent (used), Year of construction: 1998, Fritsch Cutting Table, Confectionery Line Hnjdpfx Agsyucy Istot - Model FT 450-L - Year of manufacture: 1998 - Length: 4.5 m - Electronic control - 2 cutting rollers - Calibrator/option - Technical condition: very good - Collection from warehouse/shipping option - Price on request

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 500 mm, We offer this good REAC 5.609 slitting line with packing line, year of construction 1995. Manufacturer: REAC Model: 5.609 Year of construction: 1995 Condition: good Category ID: 805 Type ID: 1270 Machine type: Slitting line with packing line Input strip width: 500 mm Hsdpfoznxffox Agtjnt Strip thickness: 0.25–2.0 mm Coil weight on the uncoiler: 5,000 kg Coil weight on the recoiler: 2,000 kg Number of slits: 20–25 cuts (0.8 mm strip width) Slitting speed: 150 m/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding Hsdpfx Agjkt I Uystont - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic Hnsdpfx Agemv Ehzetjt - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Hnjdpfozy Itvox Agtet Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal Hsdpfx Agjw Rg Emstent - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: excellent (used), Year of construction: 2020, operating hours: 97 h, functionality: fully functional, machine/vehicle number: 098 / SCS, # KRASSER Centurio 1250 – Year of Manufacture 2020 – Slitting Line with 5 Automatic Knife Pairs, Leveling Unit, and Guillotine Shear For sale is a very well-maintained KRASSER Centurio 1250 from the year 2020. The machine was taken from an operational business and is in very good, immediately operational condition. It is ideally suited for sheet metal workshops, roofing companies, facade builders, and sheet metal processing companies for the economical processing of coil material. A special advantage: the machine recently underwent a comprehensive service by the manufacturer, Krasser, as part of the take-back process. ## Technical Data * Manufacturer: KRASSER GmbH, Austria * Type: Centurio 1250 * Year of Manufacture: 2020 * Machine Number: 098 / SCS * Power: 32 kW * Connection: 3 x 400–488 V AC, N + PE, 50–60 Hz * Weight: approx. 3,600 kg ## Equipment * 5 automatic knife pairs * Integrated guillotine shear * Leveling unit * Robust industrial design * High production output * Precise slitting results The KRASSER Centurio 1250 impresses with its high manufacturing quality, reliability, and economy. The extensive equipment enables efficient and precise processing of coil material while simultaneously reducing setup times. Hodpjzcunajfx Agtjnt The machine is immediately available and ready for sale. Inspection is possible by appointment.

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hnedpfx Ajyvau Esgtjt

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Hnjdpfxjzz Iq Rj Agtjt

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Hsdstn Diepfx Agtont 20 - 300 x 0,4 - 3,5 mm

Condition: excellent (used), Year of construction: 1995, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: 0,4-3, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 160 mm, sheet thickness (max.): 3 mm, number of blades: 15, type of input current: DC, load capacity: 20,000 kg, space requirement height: 3,000 mm, feed roller diameter: 510 mm, Longitudinal slitting line for strips with a thickness from 0.4 mm to 3 mm. Decoiler 20 tons, diameter 510 mm / 610 mm, recoiler diameter 510 mm / 15 tons. The line is operational and can be tested. Operator training can be provided. Decoiler purchased in 2015, made in China. Recoiler purchased in 2021, manufacturer Poland. New electronics and new control system in 2021, manufacturer Poland. Hjdpjynuwlsfx Agtsnt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK Hnedpexlq Nwjfx Agtot With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is Availability immediate

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale is a robust Lazzari Juno 320 panel saw in a heavy-duty industrial design. This machine is ideally suited for professional use in carpentry, joinery, and interior design. Thanks to the easy-to-use sliding table, the generously sized machine table, and the 45° swivel function of the saw blade, the machine enables precise longitudinal, cross, and miter cuts. Technical data: Manufacturer: Lazzari Type: Juno 320 Year of manufacture: 2001 Main motor: 5.5 kW Voltage: 400 volts Speed: 3,200 / 5,000 rpm Cutting length / table length: 3,200 mm Table width to the right of the saw blade: 1,250 mm Machine weight: approx. 750 kg CE version Equipment: Sliding table 3,200 mm Saw blade, 45° tiltable Mechanical height and swivel adjustment Parallel fence with fine adjustment Angle/miter fence with scale Generously sized machine table Robust aluminum guide Control panel with emergency stop Speed control 3,200 / 5,000 rpm Heavy-duty industrial design Precise guide systems Dust extraction connections Ideally suited for: Solid wood processing Panel cutting Furniture making Interior design Carpentry and joinery workshops Hnsdpozn N Ukefx Agtet Series and individual production The machine is in good, used condition with the usual age-related signs of wear. It impresses with its stable design, high cutting precision, and reliable industrial drive. Inspection and a test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz Hsdjy Alcispfx Agtjnt • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, Year of construction: 2012, Year: 2012/2013 Condition: dobrý Available: Q1 2026 (february) Configuration: - MBO RBF 520 buffer unit Hodpfx Asx Em Avogtsnt - MBO SVC 521C slitting + cutting unit - MBO DFT 560/6 folding unit - 6 buckles - automatic setup - folding rollers - automatic setup - slitter shaft casette - MBO ASP 66 - shingle delivery + pressing unit - MBO X - FW 50 - mobile knife unit

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. Hjdpfxeyrup As Agtent This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Hnjdpfx Agjxlcp Notet Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, Year of construction: 2025, COLOMBO R. Discontinuous sandwich panel production line Complete PUR sandwich panel production line for manufacturing panels up to 8 meters in length. Fully automated and equipped with a heated press, high-pressure foaming machine, and integrated roll forming system. A high-performance industrial solution for producing roof and wall sandwich panels in compliance with European standards. Production specifications - Production of sandwich panels up to 8 meters long. - Panel thickness: 40 - 100 mm. - Pre-painted steel thickness: 0.40–0.80 mm. - Manufacturing of roof and wall sandwich panels. - Capability to produce tile-effect sandwich panels. - Automatic cut-to-length system. Hsdpfxezrhtme Agtsnt - Automated machine settings. - Electrical components from leading brands: Siemens, Rexroth, Schneider Electric, Omron, and SMC. Line configuration - 4-platen heated press. - Maximum panel length: 8 meters. - Production of polyurethane (PUR) insulated sandwich panels. - ULTRAMIX 100 high-pressure foaming machine with 1:1 mixing ratio and self-cleaning mixing head. - Complete roll forming line for steel facings. - Two roll forming lines for manufacturing different panel profiles. - 7-ton hydraulic decoilers. - Automatic hydraulic cutting system. - PLC control system with touchscreen interface. - Automatic control of panel lengths and production quantities. - Fully automatic dosing of foam components. - CE-compliant installation with integrated safety systems. Included - Complete production line. - High-pressure foaming machine. - Heated press. - Roll forming equipment. - Outfeed tables. - Electrical control cabinet. - PLC control system. - Technical documentation included. Panel length: Up to 8 meters Panel thickness: 40 - 100 mm Pre-painted steel thickness: 0.40 – 0.80 mm Panel types: Roof and wall sandwich panels, capability to produce tile-effect sandwich panels Control system: PLC control with touchscreen interface and automatic settings Foaming machine: ULTRAMIX 100 high-pressure foaming machine (1:1 mixing ratio) Press type: 4-platen heated press

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Hnedpfx Aexv Arxsgtst Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm Hedpfxjywdx Ss Agtsnt - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)