Used Epilog Laser for sale (2,901)

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Nedpezdqkrofx Ag Ijwn Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors Nwodszdn T Ropfx Ag Ijn with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. Nodpfxezgci Ej Ag Iswn The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Nedpszd Ut Rsfx Ag Ijwn Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: new, TRUMPF Femtosecond Laser System / Ultrafast Pulse Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power unit and extensive accessories. The system was not used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Mains connection: 380–460 V / 3 AC + PE Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power unit Operator panel with emergency stop Industrial monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Pre-assembled connection cables Original TRUMPF documentation / manuals Further extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Nwodpfez I N Tksx Ag Isn Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Nwodjzd Ulaopfx Ag Ion Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, IPG Type Model: YLP-HP-2-1500-50-100 IPG Ytterbium Fiber Laser 90-240 VAC Nwjdpfezd Rmasx Ag Ion Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Nwodpfxjz Adb Uo Ag Ijn

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Nsdsx Ap A Rspfx Ag Iown Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: MAX Photronic, laser source model: MFSC-6000, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 10 mm, working length: 3,050 mm, working width: 1,530 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 115 m/min, feed rate Y-axis: 115 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, overall weight: 4,920 kg, total length: 4,950 mm, total width: 2,280 mm, total height: 2,130 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Compact fiber laser cutting machine for sheet metal with pull-out drawer system S1530 - Fully equipped - Working area 3050x1530mm - 6 kW MAX Photonics laser - Water chiller - Fume extraction unit - Automatic O2/N2 pressure regulation - Automatic focusing head Nwedpsywwhtefx Ag Ien - YASKAWA servo motors - Light barriers for loading table - Complete operator safety enclosure - CE compliance

Year of construction: 2023, operating hours: 12,000 h, condition: like new (used), functionality: fully functional, construction height: 540 mm, Build Cylinder Size: 2x 400x400x520 mm Scanning Speed: 15,2 m/s Nwsden Dxbyepfx Ag Ien Scanner: High-precision three-axis digital galvo system Laser: CO2 Laser, 1×100W Max. Chamber Temperature: 190°C Gewicht: ca. 3.000 kg incl. 260kg FS3300 Powder incl. Chiller incl. N2 Generator incl. Breackout Station

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic exchange table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filter system with 7.5 kW Nwedpfxevw Tdlo Ag Isn Technical data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Positioning speed of the Z-axis: 18 m/min Travel range of the Z-axis: 150 mm Acceleration of the Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical data: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic measurement of drilling tools Pneumatic clamping device Brush for removing drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan power: 7.5 kW Volume flow: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine was always operated with a maintenance and support contract.

Condition: like new (used), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm available on the roof side Mobile storage device Very quiet operation Simple filter handling, modular design Operating elements on the front Powder-coated, robust housing Installation of extraction arms Volume flow control: stepless adjustment of the suction power Particle filter occupancy indicator: visual signaling SUB D9 interface: standard equipment, remote I/O, operating message, 100% filter Njdpfxsrypcde Ag Ijwn Dimensions W x D x H: approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. Njdpfx Agoz D Th Do Ijwn The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 300,012,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The JFY BFC+ is a new fiber laser cutting machine featuring a high-quality TRUMPF laser source. It enables fast, precise, and efficient cutting of various materials. The machine combines a robust design with high beam quality, stable processes, and reliable performance in daily production. It is particularly suitable for companies in the sheet metal processing, steel, and mechanical engineering industries, as well as for the production of housings, industrial components, and ventilation elements. Key advantages of the machine: * Laser source power: various * TRUMPF laser source * Fiber laser technology * High cutting speed * Stable cut edge quality * Precise cutting head with autofocus * Robust machine design * Intuitive operation * Fast production preparation * Cutting of various materials possible * High repeatability accuracy of parts * Excellent price-performance ratio * Technical support and service in Poland Application areas: * Cutting of mild steel * Cutting of stainless steel * Cutting of aluminum * Cutting of structural elements Nwedpfxjz Eq H Hs Ag Ien * Manufacturing of housings and machine elements * Production of ventilation elements * Series and single-item production * Job-order cutting !!!Individual configuration of the machine is possible according to customer requirements, including table size, loading and unloading system, and additional equipment!!! We are happy to provide you with detailed offers, technical specifications, and delivery terms at any time.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, input current: 380 A, type of input current: three-phase, overall weight: 8,350 kg, total length: 3,980 mm, total width: 1,820 mm, total height: 2,880 mm, pressing force: 100 t, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, operating speed: 180 mm/s, reverse speed: 180 mm/s, throat depth: 450 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The TPM8 is designed for maximum productivity and ease of operation. With its robust and rigid frame construction and automatic job preparation, you can achieve precise results quickly. In addition, customizable tooling kits enable a fast start-up, ensuring you get the best value for your investment. * Best price-performance ratio * Easy operation * JFY BEND - Offline programming * Maximum safety * Application and local service * Bending tools 2D - Graphic programming 3D - Graphic programming 3D - Bending simulation !!!Individual machine configuration possible according to customer requirements, as well as additional equipment!!! Machine pressing force from 60t to 320t possible. Nsdpez Eq Nzsfx Ag Iswn We are always available to provide detailed quotes, technical specifications, and delivery terms.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Nwodpfx Ajzu Sqhjg Isn Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of cooling: water, hose package length: 5,000 mm, laser power: 1,500 W, Equipment: type plate available, Hello, dear machine enthusiasts, hello, dear welding enthusiasts! Today, we have another great offer from FOMATEC: We are offering an exhibition machine – the LAWELCO Laser 1502 laser welding machine. Our offer includes: - Laser welding machine with 1,500 watts of power, water-cooled - Double-wire feeder - The welding machine can be operated with or without a single or double wire - Two laser welding safety goggles - A set of spare parts - Various welding nozzles If you pick it up yourself, you will also receive free instruction and training, or, if we send it to you, online training on the machine from our team. If you wish, you can also purchase a matching laser welding helmet. We look forward to hearing from you! Your FOMATEC team Nwedez Ihk Uspfx Ag Ion

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Njdez E R Idspfx Ag Iswn Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection Nwjdpsz Rl Nzofx Ag Ijn TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit Nodpez Itl Dsfx Ag Ijwn - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Operating hours approx. 76,000 - Cutting hours approx. 28,000 - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting edge quality - Package for cutting gas supply & cutting quality

Condition: used, LVD PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Model MFMC-12000 , Laser Power 12 KW. Nwodpfxozwgg Nj Ag Ijn

Condition: excellent (used), functionality: fully functional, We have in stock 50+ zebra zt400 zt 420 all are fully working Nodpfx Agjz S U H Sj Iswn

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, TruLaser Cell 3000 5 axes (rotary table and tilting head) Max. travel in X: 800 mm Max. travel in Y: 600 mm Nsdpfx Agjz Rpnzs Ijwn Max. travel in Z: 400 mm Max. travel in B: +/- 135° Max. load per side: 98 kg Rotary plate diameter: 1,070 mm Max. axis speed: 85 m/min Max. laser output: 8000 W Max. power at the workpiece: 3000 W Beam quality: 4 mm*mrad

Condition: good (used), Year of construction: 2015, For Sale: Trotec Speedy 400 Laser Plotter – 80 Watt (Year 2015) Working area: 1000 x 600 mm, with pass-through capability. The mechanical condition is good. The software and activation keys are included with the machine. Nodpfx Agsxfvkgj Iown The laser tube wear is consistent with the machine's age and usage.