Used Dn Solutions Dn Solutions Dnm 5700 for sale (6,284)

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered Hodpfxszch Nks Amyjr * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent auxiliary drive MB 1.65, drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump mounted below the upper edge of the chassis * Transmission lock NMV * Dual-plate clutch * Drivetrain for 44-120 tons * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04, permanent * Power Shift 3, Advanced gear shifting system * Offroad driving program * Rear-view camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to the general terms and conditions, 4 years / 340,000 km * Wheelbase 4850 mm * Chassis overhang 2500 mm * Axle load, front axle 9.0 t, * Additional parking brake on 2nd front axle * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air reservoir, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without underrun protection at the rear * Speed limiter * Transmission 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, on the right * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Parameterizable special module * Chassis overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Reversing warning, acoustic and hazard warning lights (warning signal outside) * Additional key with remote control (2) * Interface for fleet management system * Headlight protection grille * Sun visor, exterior * Stabilizer bar on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for auxiliary headlights * Seat belt warning system * Dual-plate clutch * Other equipment: Emission standard EURO 6e * ABS can be switched off * Axle configuration: 8x8/4, permanent all-wheel drive * Exterior/front mirrors, heated * Trailer coupling: drawbar coupling Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Differential lock, front axle * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic activation for headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel-sprung, standard * Suspension: leaf / leaf * Suspension: rear springs 2x15.0 t * Power windows * AdBlue tank: 25 liters * Manual lift roof (steel) * Body/superstructure: chassis for dump truck * Comfort locking system * Steering pump, unregulated * Steering wheel with multifunction buttons * Power steering cooler * Air intake behind the cab * Air compressor, 2-cylinder * Air dryer, heated * Engine 12.8 liters - 375 kW, R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Type of use: local transport * Wheelbase version 4850 mm * Ramp mirrors * Waste h

Condition: used, mileage: 750 km, power: 375 kW (509.86 HP), first registration: 06/2026, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not registered * Registration possible until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent auxiliary drive MB 1.65, drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump below the upper edge of the frame * Transmission lock NMV * Twin-disc clutch * Drivetrain 44-120 t * Transmission oil cooler * Transfer gearbox VG2800-3W/1.45-1.04, permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rear view camera * Lane keeping assist * Attention assist * Traffic sign assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * ATS warranty according to general terms and conditions, 4 years, 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle 9.0 t * Additional parking brake on 2nd front axle * Exhaust silencer, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air tank, aluminum * Electrical pre-wiring in the cab, 24V / 100 A * Suspension: front springs 9.0 t, 4 leaves * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed, type: G 280-16 Hjdpfezch Ndex Amysr * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 t * Interior filter for construction site vehicles * Fuel tank: 330 liters, aluminum, right * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive - smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Parameterizable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure control system * Reversing warning, acoustic and hazard warning lights (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight protective grille * External sun visor * Stabilizer on 2nd rear axle, reinforced * Steel rims 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights on the upper rear wall of the cab * Preparation for additional headlights * Seatbelt warning device * Twin-disc clutch * Other equipment: Emission standard EURO 6e * ABS can be deactivated * Axle configuration: 8x8/4, permanent all-wheel drive * Approach/front mirrors, heated * Trailer coupling: Ringfeder towing hitch * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above the 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Front axle differential lock * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for headlights (light sensor) * Cab: Movable cab entry step * Cab: Hydraulic tilting mechanism * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: steel-sprung, standard * Suspension: leaf spring / leaf spring * Suspension: rear springs 2x15.0 t * Power windows * Urea tank (AdBlue): 25 liters * Manual lift roof (steel) * Body/superstructure: Chassis for dump truck * Comfort locking system * Steering power pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor, 2-cylinder * Heated air dryer * Engine 12.8 liters - 375 kW R6 Diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Intended use: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat recovery * Key

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not yet registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent NMV MB 1.65 drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump positioned below the upper edge of the frame * Transmission lock NMV * Twin-plate clutch * Powertrain for 44-120 tons * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rearview camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Side Guard Assist 2 * Front Guard Assist * ATS warranty according to general terms and conditions, 4 years / 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 tons * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air reservoir, aluminum * Electrical pre-installation in the cab, 24V / 100 A * Suspension: front springs 9.0 tons, 4 leaves * Spring brake on 2nd front axle * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 tons * Interior filter for construction vehicles * Fuel tank: 330 liters, aluminum, on the right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive – smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Configurable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Rear warning device, acoustic and flashing warning light (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight protection grille * Exterior sun visor * Stabilizer on 2nd rear axle, reinforced * Steel wheels 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights, upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Additional equipment: Emission standard EURO 6e * ABS can be switched off * Axle configuration: 8x8/4, permanent all-wheel drive * Approach/front mirrors, heated * Trailer coupling: drawbar coupling Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Differential lock, front axle * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for dipped beam headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: leaf spring / leaf spring * Suspension: rear springs, 2x15.0 tons * Electric windows * AdBlue tank: 25 liters * Manual lifting roof (steel) * Body/structure: chassis for tipper * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor 2-cylinder * Heated air dryer * Engine 12.8 liters - 375 kW R6 diesel (OM 471) Hedpszch I Tofx Amyer * Engine variant OM 471 * Auxiliary drive MB 131-2c * Application: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat utilization * Key w

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: MS06001129, The MlttiScan 600 is used for capturing master data. The articles are measured and weighed using 3D measurement technology. Hjdpfxoy U Upvj Amysr

Condition: good (used), Professional three-phase electric motor from the renowned German manufacturer KAISER – Elektromotoren-Werke Kaiser. Robust industrial design intended for continuous duty in industrial machines, pumps, fans, machine tools, compressors, and technological drive systems. The motor features flange mounting and a shaft with a diameter of approximately 28 mm, with a keyway. Technical data: • Manufacturer: Elektromotoren-Werke Kaiser • Type: DN 112 S/2 • Power: 4.0 kW • Voltage: 380V • Current: 9.0 A • Frequency: 50 Hz • Speed: 2880 RPM • Three-phase motor • Shaft diameter: approx. 28 mm • Flange mounting • Durable industrial housing • Made in Germany Applications: • Pumps • Fans • Industrial machinery • Machine tools • Compressors • Technological drives Hsdpfx Amey Nm Tvjysr • Production equipment Condition: Used item. Shows normal signs of use and storage. Visual condition as shown in the photos.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Hsdpfx Amjy Sl Uqoyjr Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: excellent (used), Year of construction: 2005, The JAROMA DT-3 copy-turning and milling machine is a professional, cast iron woodworking machine with a copy device, designed for serial production of round, polygonal, and helical components. It uses turning knives or milling cutters (disc/finger) for profile machining based on a template, ensuring high shape repeatability.Main features and specifications:Application: Serial production of parts such as chair legs, balusters, and handles.Construction: Stable cast iron bed.Motor power: 2.2 kW.Dimensions: approx. 225 x 80 x 140 cm.Weight: approx. 300 kg. Hsdpfxoy Sg Dte Amysr

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, characterized by unique quality, honest workmanship, and a fair price. Honest Workmanship: Hjdpfx Amslt Ugtsyor We produce our systems directly in Poland. Only components such as gearboxes and motors are purchased from reputable manufacturers. Everything else is designed and built in-house, which allows us to meet every requirement. Fair Price: We produce in Poland, and we stand by that. Other competitors, who advertise their products as "Made in Germany," only assemble them in Germany and typically source components from Lithuania. We enable you to benefit from our low production costs, resulting in our offer price being typically 40% lower than that of our competitors. These machines for pellet production are entirely new to the market in this price/performance segment and are unique in Europe! Machines from WALW-Solutions are available exclusively through us! From systems for processing in-house sawdust from firewood production or from your carpentry shop, to the professional production of pellets on an industrial scale from wood chips, straw, miscanthus, and more – and also for the production of hay or straw bales, we can provide you with the right solution! Our systems have a capacity of 150 kg/hour up to 5 tons/hour and include all the necessary components to implement a fully automated system. For all raw materials, we find the appropriate solution or methods to integrate automation into existing systems. All machines and controls are equipped with components from Siemens, ABB, Schneider Electric, etc. Please note that net purchase is possible if you have a valid VAT ID! We look forward to your inquiry! If you are interested, please contact me directly by mobile at:

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,500 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For the past 15 years, we have also been active in the pallet industry and have developed numerous machines for nailing, automatic feeding, and stacking of wood over the years. We manufacture both standard machines and custom-tailored solutions to meet customer requirements. The DNM1600 is a flexible, compact, and efficient pneumatic nailing machine designed for the production of decks in the pallet industry. The user-friendly program allows for very rapid changeover, and the machine can store settings for over 100 different deck specifications. It features Bostitch nail guns equipped with nail magazines for jumbo coils with indicators. The machine enables the manufacturing of asymmetrical decks and is fitted with flexible cassettes for boards. A protective cover ensures noise reduction and safe operation. The machine is operated via a 10-inch touchscreen and utilizes a Beckhoff control system. Standard machine specifications: - Deck board: Length 600–1600 mm, width 75–125 mm, height 16–28 mm - Stringer: Length 600–1500 mm, width 50–125 mm, height 16–28 mm - Deck/Stringer pallet size: Length 600–1600 mm, width 600–1500 mm A two-way pallet kit is available as an additional option, allowing the production of stringer pallets/two-way pallets with a maximum stringer height of 100 mm. Capacity: - 3 decks/min (with 5 deck boards) Machine dimensions: - Length: 5000 mm, width: 2500 mm, height: 1900 mm The machine is CE-marked. Hsdoy Izb Eopfx Amyor The machine can be equipped with automatic board feeding and automatic deck/pallet stacking. For more information, pictures, or videos, please get in touch.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 440 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For 15 years, we have also been active in the pallet industry and over the years have developed a wide range of machines for nailing, automatic feeding, and stacking of timber. We manufacture both standard machines and customized solutions tailored to customer requirements. DNM3500 is a flexible, compact, and efficient pneumatic nailing machine for the production of deck or stringer pallets (2-way pallets). The machine features motorized conversion for stringer channels. Its user-friendly software enables very rapid changeovers, and the machine can store settings for over 100 different deck formats and pallets. It uses Bostitch nail guns equipped with nail magazines for jumbo coils, including indicators. There are options for producing asymmetric deck/stringer pallets. The machine is fitted with flexible cassettes for boards. An acoustic enclosure provides noise reduction and ensures safe operation. The machine is operated via a 10-inch touchscreen. Beckhoff control system. Standard machine specifications: - Deck board: length 600–3500 mm, width 75–125 mm, height 16–50 mm - Stringer: length 600–1500 mm, width 50–125 mm, height 16–100 mm - Deck/stringer pallet size: length 600–3500 mm, width 600–1500 mm Capacity: - 3 decks/min (with 5 deck boards) Hedey Izbljpfx Amyjr Machine dimensions: - Length 5000 mm, width 4400 mm, height 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking systems. For more information, pictures or videos, please contact us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 120 mm, total length: 220 mm, total height: 245 mm, usable tank capacity: 3,300 l, Safe compliant with Valrem. Fire resistance > 120 minutes External dimensions: Length: 220 cm Width: 120 cm Height: 245 cm Internal dimensions: Length: 170 cm Hsdsykapfepfx Amyor Width: 95 cm Height: 210 cm

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. Hjdpfxoy Au Ino Amyor The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D Hodpfsy Aphcsx Amyor weight of the machine ca. 8500 kg

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Material width 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm. Hedpfx Amsv Utd Heyjr

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Hedeicic Hjpfx Amyor Very good condition

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. Hjdpeyt Nm Eefx Amysr The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. Hedpfsyt Nhvsx Amysr You can view this machine in our showroom in Bergeijk.

Condition: used, Year of construction: 2019, Manufacturer : Novexx Solutions Model TE 204 Year : 2019 Type : Tamper-evident labeller Type of products handled : Carton   Hsdpfjygndijx Amyer Labelling head : ALS204 Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm   Supply voltage: 220V Motor power: 2.5 kW Technical documentation Dimensions : 2363 x 1455 x 1420 mm  

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers, enabling color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1812 C M Y K LC LM + White + Varnish, or with double CMYK + WWWW (White) + VVVV (Varnish) Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: approx. 260cm (L) x 160cm (W) Weight: 750kg Hjdpfx Asga U Tdemyer Printing area: 1800x1200 mm, with a printing height of 150mm.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS-UV4060 Max Hodefbmgfspfx Amyjr Print head: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer control and image editing Weight: 90 kg Control display Table movement via screw mechanism 360-degree operation available upon request: for bottles and round objects A2 size (45x65 cm) and a printing height of 20 cm are possible Software settings and printer instructions are available upon request. Available throughout Germany/Europe.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it can also print in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1612 C M Y K LC LM + White + Varnish or with double CMYK + WWWW (White) + VVVV (Varnish) Print head: Epson TX800 2690 dpi max. Hodpfx Aoga U Taemysr Includes software for printer control and image editing. Dimensions: approx. 240cm (L) x 160cm (W) Weight: 650kg Print area: 1600x1200 mm with a print height of 150 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS10157V CMYK, LC, LM + white + varnish option included Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing Hodpsd Hydhsfx Amyor Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 170 mm printing height 8 x 500 ml ink can be supplied! (additional cost) + VARNISH FUNCTION included Software settings and printer explanation available on request. Available throughout Germany/Europe. (additional cost) Printing videos, etc. can be sent by email/WhatsApp upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – and enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1015 C M Y K LC LM + White Print head: Epson TX800 Hodpfx Amsd Ew A Ueyor 2690 dpi max. Includes software for printer control and image editing. Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 70 mm printing height possible 7 x 500 ml ink can be supplied (additional cost) + VARNISH FUNCTION POSSIBLE Software settings and printer explanations available on request, throughout Germany/Europe (additional cost). Printing videos, etc. can be sent by email/WhatsApp.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer, a digital flatbed printer, replaces conventional laser printers and enables color printing on glass, wood, textiles, plastics, metals, and many other materials. Easy to peel and apply to various surfaces! New model: UV4060DTF Print head: Epson TX800 2690 dpi max. Hsdeg Icd Sjpfx Amysr Includes software for the printer and image editing. Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height are possible. 5 x 500ml of ink can be supplied (additional cost). Software setup and printer explanation are available upon request, throughout Germany/Europe (additional cost). Demo videos, etc., can be sent via email/WhatsApp.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – and enables full-color printing on glass, wood, textiles, plastics, metal, and many other materials. C M Y K LC LM + W + V New model: PS2513 Hjdpod Hbl Djfx Amyer Air table Print head: Epson TX800 2690 dpi max. Includes software for the printer and image editing. Dimensions: 2.85 * 1.9 * 0.74 * 1.55 m Weight: 800 kg Print size of 250x130 cm and a print height of 70 mm possible. 8 x 500 ml of ink can be supplied! (Additional cost) + VARNISH FUNCTION INCLUDED Software setup and printer explanation available upon request. Germany/Europe-wide. (Additional cost) Printing videos, etc. can be sent by email/WhatsApp upon request.