Used Deckel Fp 2 Lb for sale (78,106)

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically Isdpfxsmhfrro Ag Isat to the state of the year of manufacture.

Condition: refurbished (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new Iaodedf E H Aepfx Ag Iet - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Condition: used, Year of construction: 1989, Universal tool milling machine Ijdsr En Dyspfx Ag Isat Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 Iasdpfex It Rxjx Ag Ijt with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Iodpfx Aefzbtmog Ioat Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk Isdpfoh Rv U Ejx Ag Ijat -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Iaodolfc U Djpfx Ag Ijt Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: ready for operation (used), Grundig CNC 36 / 44216-007.00 monitor for Deckel Maho FP4-60, used, in good condition, 100% functional, scope of delivery as per photos. Iaedpfx Agsy Nqayo Iet

Condition: ready for operation (used), Grundig Dialog 12 Deckel Maho control panel / keyboard for FP4-60, used, in good condition, 100% fully functional, scope of delivery as shown in photos Iedpfx Agoy Nqa Hj Ioat

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Iajdpoy R N I Sofx Ag Iet

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Isdpfxey Idfms Ag Ioat Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), The machine comes from a training workshop, original paint in good condition. Isdpfxsyvqrve Ag Isat

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (by phone at ...). Isdpsyfvgpefx Ag Isat Model: CO S-WAY AD190S40/FP4x2 Beverage Box Body with Swing Wall and Tail Lift. Tail Lift: BÄR BC 2000 S4-C4 (2,000 kg). Body: BÖSE. Body dimensions (internal): approx. 6,800 x 2,470 mm (designed for 16 Euro pallets). Side passage height approx. 2,100 mm. Continuous side walls. Full roof retraction possible when open. Bulkhead allows smooth loading through. Speed limiter: 90 km/h. Front headlights: halogen. Cab: AD with flat roof. First aid kit, plastic bumper, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, manual cab tilting mechanism, front headlights halogen, black decorative film on doors, rear cab wall without window, AD cab with flat roof, front underrun protection for chassis with gross weight over 7,490 kg, first aid kit, plastic bumper, cab attachments black, unheated windshield, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, rear air suspension, Hi-TroniX 12TX 1810 TD, front axle air suspension, 2 wheel chocks, generator 2,160 W (24V x 90A) – recommended for tail lift operation, rear shock absorbers, chassis frame in grey, steel air tanks (number depending on suspension and trailer version), front stabilizer, exhaust pipe to the left, emission standard EURO VI E, ride height with second setting, rear frame overhang: 2,388 mm, fuel tank: 290 L aluminium, AdBlue tank: 50 L, rear axle ratio: i 3.36, heated fuel pre-filter with separator, preparation for toll system (OBU) including antenna and cabling on dashboard, no receiver, 4G connectivity box including TCO service contract, ECO-switch for changing from Power to Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission settings, VDI (Vehicle Data Interface) for telematics (FMS) version 4.0, transmission software ECO-Roll (coasting function), driving style analysis (DSE), Adaptive Cruise Control (ACC), Lane Departure Warning System (LDWS), warning triangle according to ECE-27 regulation, warning beacon, Electronic Stability Program (ESP), Advanced Emergency Braking System (AEBS), Drive tires: 315/70R22.5, mechanical roof hatch, fog lamps incl. cornering lights, cab air suspension, transparent sun visor mounted outside on cab roof, leather steering wheel, air horn behind bumper (compressed air), luxury driver seat: air-suspended, heated, multi-adjustable, right armrest, lumbar and headrest, with integrated three-point seatbelt, fully automatic climate control, ashtray in centre console, front axle weight variant 8,000 kg/rear axle 11,500 kg (technically possible: 13,000 kg), heavy-duty rear stabilizer D 60 mm, battery master switch in cab, electrically operated, 2-cylinder air compressor 630 ccm, battery charging socket, terminals, trailer socket for 24V operation, 15-pin, tow hitch by Rockinger, trailer version for use with continuous braking system, rear cross member, D-value: 130 kN, 40 mm tow hitch, 130 kN, edge protection at frame end, Iveco DAB+ radio with Bluetooth, integrated microphone, Mini-USB/…

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Iedsy Awz Repfx Ag Ioat Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: good (used), Tool milling machine DECKEL FP 33 incl. 3-axis digital readout / Heidenhain - Three-axis digital readout Heidenhain - Technical data sheet: see image - Various accessories - Crane - Documentation Dimensions (LxWxH): 2x5x2x2.8 meters / Weight: 4500 kg Errors and input mistakes excepted. Iaedsy Efyaepfx Ag Iet

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Universal Tool Milling Machine DECKEL FP 4 MK With 3-axis active digital readout Heidenhain TNC 113 Year of manufacture: 1990 Travel range: X 500 Y 400 Z 400 mm Speed range: 50 – 2500 rpm Including the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer Hydraulic tool clamping GRESSEL hydraulic vise 125 mm Iajdpfsyycagex Ag Ist Various SK 40 milling arbors Splash guard enclosure Automatic central lubrication pump for X, Y, Z axes Machine lamp Coolant device 4 machine feet Operating manual

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps Ijdpfoyxy Swsx Ag Isat - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: not inspected (used), Please see technical details on photo. Iasdpfohvzxzox Ag Ijt

Condition: reconditioned (used), Year of construction: 1975, functionality: fully functional, 3-axis digital readout FAGOR Year of manufacture: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Iedoyw H Euspfx Ag Ijat Universal table 660 x 380 mm clamping surface Vertical milling head Extendable quill Milling cutter guard enclosure Machine lamp Various tool holders SK 40 Chip tray Coolant system 4 pcs. machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION !!!

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 2 rpm, table length: 900 mm, table width: 530 mm, type of input current: three-phase, total length: 900 mm, total width: 530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2 rpm, warranty duration: 3 months, working range: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this overhauled Deckel FP 4-60T tool milling machine with Dialog 11 control, year of manufacture 1992. Iedpfjx Sv Ubox Ag Isat Deckel: FP 4-60T Condition: Fully overhauled Tool changer: 24 positions Control: Dialog 11 If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm Iodpfx Agjclli Ue Ioat carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm Iaodpfxofnry Ho Ag Iot tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: excellent (used), jaw width: 160 mm jaw height: 50 mm span width: 310 mm total height: 170 mm Iaodpfx Aod Hyfwog Iet

Condition: good (used), Clamping surface of the fixed angle table: 195 x 605 mm Table travel longitudinal/vertical automatic and manual: 290/300 / 330/340 mm Iodoyvgf Ropfx Ag Ioat Spindle head transverse travel manual: 150 mm Spindle taper: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Iasdpfsr D T Uyox Ag Iet Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition