Used Cmz Ta-15-Ys-640+Gl20 for sale (27,607)

Condition: used, mileage: 202,092 km, power: 290 kW (394.29 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, color: orange, emission class: euro6, total length: 7,700 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, soot filter, MB 2640 Multilift Roll-off Truck 6x4 Suspension: Leaf-air Wheelbase: 3.60 m Payload: 14,565 kg HIAB Hooklift Type: XR21S46 - W - IT2B- Year: 2016 4.80 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Step with handrail on the roof, Exhaust to the lower right, Brake connection standard and DuoMatic, Air horn, Suspension: Front springs 8.0 t, 3 leaves, Transmission: 12-speed - Type: G 230-12, Rear lights, construction site version, Info display 10.4 cm with additional display, Interior filter for construction vehicles, Fuel tank: 290 L steel, left, Air intake from the front, Parameterizable special module, Rotating beacon left/right, Reversing warning audible (warning signal outside), Rear cross member reinforced, Protective plate under main tank, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sunshade for side window, driver's door, Additional stabilizer, Rear axle / trailing axle, Storage flap outside left, 24V socket in the passenger footwell, additional, Stone chip protection grille Additional Equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Fgedpfxjzf Sg Do Akyjh Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Rear axle bevel gear 233, Interior filter: Pollen filter, Steering power pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Frame lowering without air spring residual pressure control, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger multi-adjustable seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler transmission We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to change and prior sale.

Condition: used, Three Dimension Coordinate Measuring Machine MITUTOYO CRYSTA-Apex S574 Fedpfxsy Ufkks Akyjgh

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TBI-520 Fjdpfx Aezqbkcjkysgh CNC: Fanuc Year: 2002 Without Tailstock

Condition: ready for operation (used), Year of construction: 2005, operating hours: 40,135 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 296 mm, travel distance Z-axis: 1,090 mm, total height: 1,950 mm, total width: 1,550 mm, overall weight: 5,500 kg, controller manufacturer: FANUC, controller model: Series 21i-TB, product length (max.): 3,700 mm, number of axes: 2, CNC Slant-Bed Turning Center manufactured in 2005. This CMZ TBI-520 features a maximum swing over bed of 520 mm and a maximum turning length of approximately 1,100 mm. It is equipped with a 12-station turret and a hydraulic 3-jaw chuck with a diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the CMZ TBI-520 machine we have for sale. Contact us for further details. • Electrical supply: 380 V / 50 Hz / 62 A • CE compliant • Working capacity: • Max swing over bed: 520 mm • Max swing over cross slide: 420 mm • Max turning length: approx. 1,100 mm • Distance between centers: 1,100 mm • Rapid traverse: • X-axis: 18 m/min • Z-axis: 18 m/min • Spindle: • Spindle bore: approx. 82 mm • Bar capacity: approx. 77 mm • Turret: • 12-station turret • Fixed tool holders only • No C-axis • Tailstock: hydraulic • Operating hours: approx. 40,135 h • Machine powered and available for inspection Fgsdpfx Akozq Ay Esysh • Condition: well maintained Additional equipment • Hydraulic 315 mm 3-jaw chuck (SMW‑Autoblok) • Chip conveyor • Automatic lubrication system • Coolant system • Work light Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,050 kg, total length: 158,200 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, clear span: 2,700 mm, load capacity: 4,100 kg, frame height: 4,000 mm, load per truss pair (max.): 2,050 kg, Pallet racking system: 7 x double rows, each with 4 bays 4 m high, each with 2 beam levels (clear span 2700) Scope of supply: 70 frames, 4 m high (RM4011) 280 floor anchors 70 spacers for double rows 224 beams, 2.7 m long, 0.09 m high (TR27094) Fodpfszlccpex Akyegh 14 load capacity signs Delivery free to construction site Frames are bolted, not pre-assembled Freight / Delivery: - max. 20 working days after payment receipt - free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; - excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Fgsdpfx Aszd Tllokyjh Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-200 Tons/hour capacity of Screening & Washing Plant: Fodpfx Akjzd Eurjyjgh - 30m3 Sand Feeding Hopper -1600x5000mm Vibrating Screen - STE 1224 Dewatering Screen & Hydrocyclone - Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Bystar 4025 NT 80 for sale Fedpfszw Em Isx Akyogh C02 laser 4.4kW Bylaer resonator Fully operational and can be seen in production Machine includes Dust extraction and chiller Also included is an additional Bylaser 4400 (4.4kW) Perimeter light guards The machine is unique in that it has two 8000mm change over tables that feed the 4025 machine, two extension work areas at each end of the machine as can be seen in the pictures allowing an 8000mm cutting area. Please feel free to contact if you require any additional information, currently in production but will be available for decommission in November due arrival of new machine.

Condition: used, mileage: 917,010 km, power: 220 kW (299.12 HP), first registration: 09/2008, fuel type: diesel, number of seats: 41, gearing type: automatic, empty load weight: 11,600 kg, maximum load weight: 6,200 kg, overall weight: 17,800 kg, emission class: none, color: red, suspension: other, total length: 11,950 mm, Year of construction: 2008, driver cabin: other, construction height: 3,120 mm, fuel: diesel, Equipment: ABS, parking heater, The engine is running, but the vehicle is not moving. This used Setra S415 NF intercity bus offers a reliable transport solution with its Euro 5 diesel engine and an output of 220 kW (299 hp). The bus, first registered on September 4, 2008, has a mileage of 917,010 km and impresses with its efficiency thanks to the Euro 5 EEV1 emission class. With a length of 11,950 mm and a width of 2,550 mm, it offers space for 41 seats and 54 standing places. The vehicle has an automatic transmission, ABS, and an auxiliary heater, which increases comfort for the passengers. The Setra bus has two doors and is approved for a total weight of 17,800 kg. Inspections of the bus are possible without prior appointment from Monday to Saturday. A registration service and delivery within Germany are offered for an additional charge. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale are subject to change. Fjdpfxsyhrrme Akyegh

Condition: used, mileage: 1,457,687 km, power: 315 kW (428.28 HP), first registration: 07/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, total length: 10,250 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 7,100 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes-Benz Actros 1843 * First registration: 07/09/2015 * Euro 6 Fgodpfx Akozlmqqeyoh * 315 kW / 428 hp * Engine displacement: 10,677 cm³ * Engine OM470 LA.6-1 * Diesel * Automatic transmission * Air suspension * Wheelbase: 5,500 mm * Unladen weight: 9,940 kg * Permissible total weight: 19,000 kg * Payload: 7,985 kg * Permissible braked trailer weight: 28,500 kg * Permissible gross vehicle weight: 44,000 kg * Maximum speed: 90 km/h * Box body * Enclosed box body * BÄR loading platform * Ideal for general cargo, furniture or sensitive goods * Good loading height * Robust design * Trailer * Manufacturer: Rohr Nutzfahrzeuge * Type: RAK 18 VI * First registration: 01/28/2011 * Unladen weight: 5,260 kg * Permissible total weight: 18,000 kg * Payload: 12,740 kg * Air suspension * BÄR loading platform * Robust box body * Tire size, tractor unit * 315/70 R22.5 * Rims 9.00 x 22.5 * Trailer * 385/65 R22.5 * Rims 11.75 x 22.5 * Equipment * Mercedes PowerShift automatic transmission * Air-suspended rear axle * Air conditioning * Cruise control * Cab in good condition * Loading platform on the tractor unit * Loading platform on the trailer * Trailer coupling * Fifth wheel coupling * Air brake system * ABS * Euro 6 * Ready for immediate use * Dimensions, tractor unit * Length: 10,250 mm * Width: 2,550 mm * Height: 3,700 mm * Box body length: 7.10 m * Box body width: 2.50 m * Box body height: 2.45 m * Trailer * Length: 9,600 mm * Width: 2,550 mm * Height: 3,800 mm * Box body length: 7.10 m * Box body width: 2.50 m * Box body height: 2.45 m * Technical data * Vehicle class N3 * Trailer class O4 * Gross vehicle weight up to 44 tonnes * Air suspension * Vertical load 1,000 kg * Braked trailer weight 28,500 kg

Condition: used, mileage: 637,396 km, power: 353 kW (479.95 HP), first registration: 02/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,860 mm, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, MAN 26.480 TGX interchangeable system with hooklift, crane, and container 6x2 Payload: 11,700 kg Wheelbase: 4.80 m Suspension: Leaf-air Crane: 1x Hydraulic extension 1x Hydraulic grab 2x Hydraulic outriggers 5th & 6th function VDL Hooklift: Type: S-20-6300 + Hydraulic container locking + 6.00 m up to the center of rollers Container Length: 6.00 m Height: 2.00 m Width: 2.38 m Special equipment: Storage box Trailer coupling: Ringfeder 4040 G 150A Antenna for car phone Work lights (2) on cab roof Exterior and wide-angle mirrors, electrically adjustable and heated Kerbside mirror right, electrically adjustable and heated Bolted body mounting angles CB radio roof antenna Rear axle differential lock Air horns (2) on cab roof Cab: air suspended Comfort driver's seat, air suspended and heated, with lumbar support and shoulder adaptation Flame-start system Transmission: 12-speed, type ZF 12 AS, TipMatic Heavy-duty roll stabilization Fuel tank: combo aluminium tank – 400 L diesel + 60 L urea solution (AdBlue) Roof air deflector Eberspächer D4S auxiliary air heater Trailing axle NOL-08, steered, liftable PTO at flywheel side Retarder Rotating beacon (2) External sun visor Reinforced front axle shock absorbers Cab door extension Front axle VOK-09, dropped Additional high/low beam & fog lights with cornering light Additional equipment: Axle configuration: 6x2 Ambient lighting Starting/front view mirror Trailer socket 24V / 7-pin Trailer socket for ABS Traction control system (ASR) Audio system: MAN Media Truck Advanced radio 12V, navigation system ready Battery 175 Ah On-board computer MAN-Tronic Electronic brake system MAN-Brakematic EURO 6 engine Cab: Nordic insulation Cab: XXL Suspension: leaf/air Electric windows Remote central locking Tinted windscreen Alternator 28 V 80 A Rocker lever brake EVB Automatic climate control, heated fuel filter Multi-function steering wheel Raised air intake Air compressor, 1-cylinder 360 ccm Air dryer Engine 12.4 L – 353 kW diesel Engine compartment encapsulation Wheelbase 4800 mm Fjdsyau Rvjpfx Akyegh Spare wheel holder behind rear axle Rear axle disc brakes Front axle disc brakes Lateral protection device Tinted rear side windows Seat covering/upholstery: comfort quality Sunblind for side window, driver's door Stabilizer on one rear axle Stabilizer front axle External tool/storage box TGX, tinted door windows Rear underride guard Front underride guard Viscous fan Central locking GVW 26.0 t We are also happy to support you with financing or leasing options in cooperation with our partners. All information without guarantee. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 2010, A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 646kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible. Fodpfx Akjztdt Soyegh

Condition: used, Year of construction: 2011, Used 2011 CMZ TB67 presented in immaculate and well maintained condition, and photo'd here whilst still in production...specified as follows: Technical Specifications: Max. Swing Diameter 640mm Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Spindle Size / max bar Ø: 66mm Power: 17.4 Kw Turret 12 positions. Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Dimensions (L x W x H): 1,653 x 1,620 x 1,670 mm Machine Weight: 3,700 kg Additional Equipment: Parts Catcher Swarf Conveyor Fjdjy Ui Iajpfx Akyjgh Tailstock Tool Measuring Arm Suite of tool holders 3-Jaw Hydraulic Chuck Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Power: 17.4 Kw Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Weight: 3,700 kg

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 15.62 kW (21.24 HP), type of input current: three-phase, type of cooling: air, overall weight: 180 kg, input voltage: 400 V, total width: 1,460 mm, total length: 600 mm, total height: 1,210 mm, warranty duration: 12 months, heating capacity: 17.24 kW (23.44 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 18Y 15.62 kW/17.24 kW Cooling capacity: 15.62 kW / 4.44 tons (12/7 — 35°C) Heating capacity: 17.24 kW / 4.89 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02, expansion vessel. Fgodpfx Asy Ef Ecskyjh Dimensions: 0.6x1.46x1.21 m Weight: 180 kg Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark Metal Analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of datasets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional Fedpeziar Nofx Akyjgh In like-new condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grid/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples A groundbreaking spark excitation and optical design to ensure the best performance in its class An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both new users in production and experienced laboratory staff The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. W x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Fedoxhfuaspfx Akyegh Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: like new (used), mileage: 141,000 km, fuel type: gasoline, Year of construction: 2015, PIAGGIO PORTER MAXI 2015, twin wheels, 1.3 petrol, tipping waste container, rear comb by Rossi, newly fitted tires and serviced, 141,000 km, ready for use. Fsdpfowx Irlox Akysgh BENITO 3383844139 MICHELE 3394588233

Condition: repair required (used), feed length X-axis: 1,500 mm, feed length Y-axis: 600 mm, feed length Z-axis: 450 mm, Manufacturer: Reckermann Tip: Beta 10 Movements: X: 1500 mm Y: 600 mm Z: 450 mm Fgedouhnznepfx Akyoh Control: Sinumerik 810M Y-axis does not move, it does not stand on a reference point!

Condition: new, Year of construction: 2026, CORMAK Scissor Lift Platform Truck – 150 kg Capacity The CORMAK scissor lift platform truck is a high-quality device designed for professional applications in warehouses, production facilities, and logistics operations. Thanks to its robust construction, innovative technological solutions, and precise engineering, it is a reliable tool for lifting and transporting loads with a maximum capacity of 150 kg. Its ergonomic design and excellent maneuverability make it one of the best solutions in its class. Main Advantages of the Scissor Lift Platform Truck 150 kg load capacity – enables safe lifting and transportation of heavy loads. High mobility – equipped with reinforced polyurethane wheels, ensuring smooth movement even in demanding working conditions. Precise height adjustment – lifting range from 225 mm to 745 mm allows the truck to be adapted to various tasks. Ergonomic operation – intuitive controls and an ergonomic handle make maneuvering easier and reduce operator fatigue during long working periods. Safe operation – the hydraulic foot pump system and wheel locking mechanism provide full stability during use, eliminating the risk of uncontrolled movement. Construction and Technology The CORMAK scissor lift platform truck features a robust construction made of high-quality materials, ensuring exceptional durability and resistance to intensive use. The scissor lifting mechanism allows smooth and precise load lifting, while the hydraulic foot pump system guarantees quiet and efficient operation. The use of modern technologies and reliable components makes this platform truck an excellent solution for demanding working environments where durability, precision, and safety are essential. Work Precision and Efficiency One of the key advantages of the CORMAK scissor lift platform truck is its high precision when lifting loads. The scissor mechanism enables smooth and safe lifting of loads weighing up to 150 kg, providing both convenience and efficiency during operation. Precise control of the platform height allows the truck to be perfectly adapted to specific working requirements. This helps reduce operation times and minimizes the risk of errors during the handling and transportation of goods. Fjdpfx Akev Aiinjyogh Standard Equipment Reinforced polyurethane wheels – provide excellent mobility and resistance to wear. Ergonomic handle – facilitates maneuvering and improves operator comfort. Sealed hydraulic foot pump – enables smooth and effortless load lifting. Adjustable platform lowering speed – allows precise control of the lowering process according to specific requirements. Wheel locking mechanism – ensures stability during operation and prevents uncontrolled movement. Technical Specifications Parameter Value Maximum load capacity 150 kg Lifting height 225–745 mm Platform dimensions 740 × 450 × 35 mm Handle height 805 mm Weight 47 kg

Condition: new, power: 110.32 kW (149.99 HP), fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,585 mm, energy efficiency: E, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,800 mm, loading space width: 1,680 mm, loading space height: 1,720 mm, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cooling unit, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, sliding door, traction control, truck registration, NEW INSULATED REFRIGERATED VAN 3 EPAL - RENAULT MASTER 150.35 VAN L2 H2 INSULATED FRIDGE - NEW 2025 VERSION RENAULT MASTER RED EDITION WITH FACELIFT Brand new, unregistered, and immediately available, this insulated refrigerated van is ideal for transporting fresh and frozen goods over medium or long distances. The category B Renault Master 150.35 refrigerated van, latest version NEW RENAULT MASTER facelift 2025 series, features a 150 HP 2000 cc engine, EURO VI-E compliant, complete with air conditioning, Bluetooth radio with Apple CarPlay and Android Auto, wireless phone charging, electric windows and mirrors, fog lights, front and rear parking sensors, and rearview camera. The van is fitted with isotermic insulation, two insulated side doors on the right, and a refrigerator unit. ATP FRCX -20°C certified, it can carry up to 3 EPAL pallets. Equipped with a CARRIER XARIOS 350 refrigeration unit, ROAD-POWERED AND 220V. Usable load area: 2800 mm length, 1680 mm width (wheel arch clearance 1300 mm), and 1720 mm height. Also available through leasing, financing, or long-term rental. Discover more details about this insulated refrigerated van. PRODUCT CODE: N-708B TYPE VAN EMISSIONS STANDARD EURO VI-E GROSS VEHICLE WEIGHT 3500 kg ENGINE RENAULT 2000 CC Brand Renault Trucks INTERNAL USABLE DIMENSIONS L 280 cm x W 168 cm x H 172 cm PAYLOAD 1000 kg POWER 150 HP RANGE Master KM 0 TRANSMISSION 6-speed manual EQUIPMENT Insulated refrigerated FUEL Fedpfx Akev Rchajysgh diesel WHEELBASE 3585

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 159.7 kW (217.13 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,960 kg, input voltage: 400 V, total width: 2,220 mm, total length: 3,110 mm, total height: 2,150 mm, warranty duration: 12 months, heating capacity: 178 kW (242.01 HP), Aircooled chiller/Heat pump CLIMAVENETA NECS NR SL S 0704 159.7 kW/178 kW Cooling capacity: 159.7 kW / 45.41 tons (12/7 — 35°C) Heating capacity: 178 kW / 50.61 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP233KZE-TED-456 (scroll) + 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 3.11x2.22x2.15 m. Weight: 1960 kg. Working hours: 0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Fgjdpfezwuykjx Akyjh The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), IBR Measuring Technology IMB-im2 measuring module for connecting 2 inductive probes, serial no.: 00250215, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fjdpfozt H Huex Akyogh

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M574 was manufactured in 2010. It features a measuring range of 500 × 700 × 400 mm and includes a Renishaw MH20i probe head with a TP20 standard force probe system. The machine is equipped with a granite measuring table and multiple styli for enhanced versatility. If you are looking to get high-quality coordinate measuring capabilities, consider the Mitutoyo Crysta-Plus M574 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 500 × 700 × 400 mm • Probe Head: Renishaw MH20i • Probe System: TP20 Standard Force • Probe Module: Standard Force • Scale Resolution: 0.0001 mm (0.1 µm) • Probe Ball Diameter: Ø 4 mm • Stylus Length: 20 mm Fjdjzt Nq Njpfx Akyjgh • Operating Temperature: +5 °C to +40 °C • Length Measuring Error (E0, MPE): (5 + 6L/1000) µm • Single Stylus Form Error (PForm, MPE): 6 µm • Test Sphere Diameter: Ø 3.994 mm • Automatic Temperature Compensation: No • Calibration Date: 10 March 2026 Additional Equipment • Renishaw MH20i indexing probe head • TP20 probe system • Stylus rack • Multiple styli • Granite measuring table • Machine stand

Condition: good (used), Year of construction: 2017, Machine is in good working conditions. Parts shown by hand not come. Technical data are on pictures. Fedjzlalhjpfx Akyogh

Condition: ready for operation (used), Year of construction: 2006, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 3, This 3-axis Bystronic Bysprint 3015 CO₂ laser cutting machine was manufactured in 2006. It features a working area of 3,000 × 1,500 mm and includes an automatic table changer and two cutting heads. The machine has a maximum cutting capacity of 12 mm for stainless steel and 20 mm for mild steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint 3015 machine we have for sale. Contact us for further details. • Working area: 3,000 × 1,500 mm • Cutting heads: 2 (5" and 7.5") • Features/Options: Cut Control; Adaptive mirror bypass; MCS; STL • Resonator: Included • Cutting-head cooling system: Included Fodpfx Aszq Ap Tekyegh • Original turbine operating hours: Approx. 7,000 hours • Maximum cutting capacity: • Mild steel: Up to 20 mm (continuous operation) • Stainless steel: Up to 12 mm • Aluminium: Up to 6 mm Additional equipment • Automatic table changing system • Fume extraction system • Machine manuals