Used Cmt Ursus Tc 600 for sale (13,261)

Condition: new, table length 600 mm table width 240 mm x-travel 370 mm y-travel 130 mm table height 165 mm weight 60 kg Isdpfxsfgvzuo Ahyoih dimensions 0,8 x 0,45 x 0,2 mm Cross table with turntable

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide Iiedpfeupxupsx Ahyjh • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), Touch panel Space requirements: Width: 600 mm Depth: 500 mm Iiedpeg Af U Esfx Ahyjh Height: 90 mm

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device Ijdjhx Haljpfx Ahyeih - Drainage device - Anti-tip device and forklift pockets.

Condition: used, Year of construction: 2007, operating hours: 27,000 h, functionality: fully functional, A used mobile scrap shear is being offered for sale. The machine can be inspected at any time. Iodpfxeykzv Ho Ahyeih

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 Iiodpfjwhzmzex Ahyoh - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: used, This listing is for 1 of 3 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and ready for immediate use General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Titrations Iedpfoxhfztex Ahysih Standard preparations Reagent distribution Sample aliquoting

Condition: used, Technical details: width:: 400 depth: 335 mm Isdpfx Ahjwfrq Soysih height: 500 mm 2 pieces available (price per piece) Cast steel material Slot transverse:Quantity 4 Size: a=22mm, h=41mm, b=37mm ,c= 15mm Number of clamping holes: 8 Size 4x22mm/4x26mmm *

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,078 h, load capacity: 5,000 kg, lifting height: 2,980 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Refurbished, no warranty Ijdozup Iwepfx Ahysih Technical condition: very good Front tire type: Superelastic Front tire size: Brand new Front tire condition: New Rear tire type: Superelastic Rear tire size: Brand new Rear tire condition: New Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: 88% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, LED.

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid Iisdpfjz Eikwox Ahyjh steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, Year of construction: 1989, Technical details: rotary table diameter: 630 mm grinding height: 350 mm grinding head - power requirement: 11 kW grinding length: 600 mm max. dia. of grinding wheel: 450 mm grinding spindle speed: 764 -1.485 steples U/min automatic feeds: 0,002 - 0,1 mm table speed: 8 - 128 steples U/min rotary table revolutions per minute : 8 - 128 stepless U/min rotary table: 630 +3° /-5° mm total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimension machine approx.LxWxH: 2,6 x 2,3 x 2,5 m The rotary table is tiltable. Heavy-duty industrial surface grinding machine from the German manufacturer REFORM, equipped with a horizontal grinding spindle and a large rotary table. The machine is suitable for precision surface grinding of rotationally symmetrical as well as large-area workpieces. The continuously rotating table ensures uniform machining of the workpiece surface. The machine is equipped with a large magnetic rotary chuck, a heavy-duty grinding spindle unit, automatic infeed and grinding movements, as well as a coolant system with filtration unit. Its robust and heavy machine construction is designed for continuous industrial operation and for applications requiring high standards of flatness and surface finish. Particularly suitable for grinding flat workpieces. Iedpfx Ahjz E Hu Heyeih *

Year of construction: 2022, condition: ready for operation (used), overall weight: 1,140 kg, Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details. • Rotor diameter: 300 mm • Rotor width: 600 mm (actual cutting length: 590 mm) • Drive capacity (motor): 11 kW or 15 kW (depending on application) Iiodpjz E R Rxjfx Ahyoh • Feed opening: 400 x 590 mm • Throughput rate: Approx. 150–250 kg/h (material and screen size dependent) • Rotor knives: 3 rows, V-cut geometry (3 x 2 segmented knives) • Stator knives: 2 rows, reversible with dual cutting edges • Standard screen mesh: > 6 mm (interchangeable; multiple sizes available)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 600, number of blades: 20, rotational speed (max.): 1,475 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 22 kW Speed: 1,475 rpm Hydraulic unit power: 3 kW Oil tank capacity: 48 l Number of axles: 1 Opening width: 600 mm Opening length: 250 mm Iiodpfx Ajz Ebbbehysh Screen perforation: 15 mm Number of fixed blades: 20+ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,350 x 2,400 mm Number of transport packages: 3 Note: The magnet is not included in the offer.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 38,515 h, spindle speed (max.): 10,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 426, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details. • Interference circle (Störkreis): 400 mm • Operation voltage: 400 V (3 phase, 50 Hz) • Control voltage: 24 V (DC) • Total nominal current: 63 A • Total power rating: 42 kVA • Spindle on: 38,515 hours • Axes in motion: 36,413 hours • CTS • Chip conveyor Technical Specification Taper Size HSK 63 Iedpfsz D S Ayex Ahyoih Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Iedpfx Aezkpv Hshyeih Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: excellent (used), - Equipped with a touchscreen display for 100 programs - Variable speed control up to 30 dispensing cycles per minute - Suitable for sheet widths of 60 cm - Compatible with “standard Matfer” nozzles - Equipped with a wire-cutting function (requires an air compressor at 6 bar for this) - Includes a roller head for hard dough (e.g., meringues) and soft dough (e.g., macarons and cakes) - Includes drive for the conveyor belt, roller head, and table (height adjustment) - Easy to disassemble for cleaning - Weight: 140 kg Iijdoz Inhtopfx Ahyjh - Electrical connection: 16A, 50 Hz

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 22,460 h, load capacity: 5,000 kg, lifting height: 3,760 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, empty load weight: 7,250 kg, total length: 3,050 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this H50D-02/600. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Side shift, Heater, Iiodez Evpaspfx Ahyjh Full cabin.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 12,000 kg, fork length: 1,800 mm, Forks Load center: 600 Iiodpfx Ahez Ev Ezeysh Fork width: 250 mm Fork thickness: 65 mm Condition: Ready for use and fully functional Technical condition: very good Description: LOAD STABILIZER; opening range: 100 - 1200 mm; FEM 5B LOAD STABILIZER; opening range: 100 - 1200 mm; FEM 5B

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394C04103, Year of construction: 2012, operating hours: 19,070 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,070 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,100 mm Overall height: 3,070 mm Load capacity: 5,000 kg MACHINE DETAILS Mast type: Simplex Fuel type: Diesel Unladen weight: 7,600 kg Operating hours: 19,070 h Iodpfx Ahez I I Rujysih External reference: SL15892SP

Condition: used, functionality: fully functional, overall weight: 2,800 kg, total length: 2,750 mm, total width: 1,500 mm, total height: 1,800 mm, input voltage: 400 V, rotor diameter: 730 mm, rotor width: 600 mm, Hammer mill with swing hammers for secondary size reduction of cable scrap, aluminium, e-scrap and non-ferrous metals. Technical data: – Rotor: hammer circle diameter approx. 730 mm, width 600 mm, rotor discs Ø 520 mm – Hammers: plate type 215 × 100 × 13 mm, bore 35 mm – Screen: replaceable perforated screen, one fitted – Drive: V-belt, ABB motor frame 225 (approx. 37–45 kW), 400 V / 50 Hz – Electrics completely renewed, new control cabinet included Ijdpfx Ajz I I Hvshyeih – Hinged upper housing – Dimensions approx. 2,750 × 1,500 × 1,800 mm incl. motor and hopper, weight approx. 2,800 kg Scope of delivery: mill with motor, belt guard and control cabinet; new complete wear part set (hammers, pins, spacer rings, unused); discharge belt conveyor with gear motor. Nameplate missing, manufacturer unknown. The machine runs without problems. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,850 h, load capacity: 5,000 kg, lifting height: 5,860 mm, free lift: 1,400 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, total height: 2,900 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, seat heater, Load capacity 5000 kg Linde H 50 Diesel Mast type: Triplex free-lift Year of manufacture: 2011 Operating hours: 7850 Lifting height: approx. 5860 mm Overall height: approx. 2900 mm Side shifter + fork positioner Full cabin with heating Gross price: 26061, Net price: 21900 Iiedpfxez Ihlls Ahyeh Are you looking for a different forklift or pallet stacker? LPG, electric, or diesel? Write to us, and we will find the right vehicle for you. Subject to errors and prior sale. Sale only to commercial customers, without warranty.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp MultiGrip Bucket / MG.060.060 / MS03 / 600 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,940.00 net / €4,688.60 gross - Excavator up to: 6 tons - Own weight approx.: 185 kg - SAE capacity: 150 liters - Cutting width: 600 mm - Maximum opening: 1,010 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines the two attachments, a deep bucket and a grapple, into a single tool. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grapple swivel lines are required for operation - Robust bearing in the side wall - Safe gripping and transport Ijdsyl Hfiopfx Ahyeih - Stable shafts connect the two fingers (forming a 3-point grip for small parts) - Significantly lighter than a grapple - During excavation work, up to 30% more soil can be loaded into the bucket - Minimization of damage from falling material The MultiGrip is suitable for all excavation and gripping operations; it is ideal for moving stones, filling soil, and gripping wood and brush, and is significantly faster than a grapple. It can grip and sort all types of materials, even soil or grass. Due to its unique shape, the MultiGrip bucket has optimal penetration and handles bulky material well. We have many other Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale are subject to change! = More information = New: Yes Intended use: Construction Unladen weight: 185 kg Please contact Marius Herden for more information.

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Iiedpfovfxx Djx Ahyoh Equipment: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m Iodpoibq Itefx Ahyoih weight of the machine ca.: 6,5 t

Condition: used, Technical details: table length: 500 mm Iiedpfx Ahswbhdmeyoh table width: 300 mm width:: 500 depth: 300 mm height: 400 mm dimension L-W-H: 500 x 300 x 400 mm weight: ca. 55 kg with slotted holes Cast steel material Surface finished *