Used Cefla Ecolight Tlf/Bb/4+Tte 4000 for sale (62,213)

Condition: used, Year of construction: 2017, operating hours: 4,921 h, Equipment: all wheel drive, Komatsu PC490LC-10 - Year of manufacture: 2017 - 270 kW - Weight: 47,410 kg - Camera - LED work lights - Cabin rockfall protection grid - Central lubrication system - Radio - An additional/standard arm will be supplied and is included with the excavator. Subject to errors and prior sale. Internal vehicle number: 10220 WhatsApp support available! Podpfx Aovc Tftehyegk If you have questions about the machine or need further information, feel free to contact us conveniently by WhatsApp. WhatsApp WhatsApp

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Pjdpohbyr Sefx Ahyjgk Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Weight completely approx. 1750 kg with Demag chain hoist Connection to 400V 360 ° swivel range Pgodpjfi U E Djfx Ahysk The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold See pictures Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, consists of: 1. Dryer CEFLA FEV E: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. Roller conveyor CEFLA TR 3000 Heating medium: Electric Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. The dryer is configured with a laminar flow of hot air in the opposite direction to the workpiece feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Useful pass-through height: 80 mm Solvent-laden air exhausted to outside: 0–4,000 m³/h Machine control via 5.7" LCD touchscreen panel VS spark-proof supply/recirculation fan: Output: 2.2 kW; Capacity: 40,000 m³/h; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h (heating system 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. The dryer is configured with a laminar flow of hot air in the opposite direction to the workpiece feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Useful pass-through height: 80 mm Installed electrical power: 115 kW Solvent-laden air exhausted to outside: 0–4,000 m³/h Machine control via 5.7" LCD touchscreen panel VS spark-proof supply/recirculation fan: Output: 2.2 kW; Capacity: 40,000 m³/h; Electrical output discharge: 1.5 kW; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h PR frost protection for 1 heating register, with probe and automatic damper control 3. Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives for highly efficient heat exchange due to the high air velocity. The ventilation unit consists of: Pedew H Aw Sepfx Ahyjgk - Supply and recirculation fan: 3 kW; Capacity: 6,000 m³/h - Exhaust fan: 1.5 kW; Capacity: 6,000 m³/h Digital ventilation adjustment via touchscreen. The air knives are installed across the entire tunnel surface. Air knife outlet velocity max. 32.5 m/sec Total length: 3,000 mm Useful width: 1,300 mm Total width: 1,783 mm Useful pass-through height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via 5.7" LCD touchscreen TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars: 4. Roller Conveyor CEFLA TR 3000 Motorised rollers with PVC covering Length: 3,000 mm Photoelectric sensor for thin panels, thickness 4 mm (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: like new (used), FRONIUS TPS 4000 CMT AUSTRIA * We offer the devices in a wide variety of configurations and always have several sets in stock. TPS / CMT / HAND / ROBOT all in stock and available immediately! Sample images of the article. Various CMT hose packages UNIVERSAL or HOLLOW SHAFT robots. A large number of different spare parts in stock, just send us a quick email or call or Whatsapp. The prices stated are all from ... euros. The prices/offers are created individually according to the device configuration. SCOPE OF DELIVERY: .) Fronius power source (Tps 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius wire feeder VR 1550 CMT or VR 7000 CMT Pgjdpfehpzvwex Ahysk .) Fronius intermediate hose package .) Fronius trolley optional or stand console .) Fronius hose package Robacta CMT version depending on availability .) Fronius RCU 5000i remote control or standard insert (standard operation) .) Harris pressure reducer new and in original packaging .) Ground cable 4m 50mm2 Interface optionally available for an additional charge -> Profibus approx. 800, Interbus 500 euros, Devicenet approx. 800 euros ... Also reachable via Whatsapp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallet possible for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe on request All prices are starting from prices you can configure the devices with us. Robot device or hand device. Long connecting hose package or short. A wide variety of hose packages to choose from. Synchropuls. 270 400 or 500 amp devices in stock. Cmt version available as hand or robot. The best thing to do is to call us, we will discuss your area of application and you will receive an initial price estimate from us.

Condition: good (used), Manufacturer: Stuckstette Pedeg Snudspfx Ahysgk Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted.

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Psdpfx Ajhgg Eushyogk Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Year 2011 Pjdot S Ehzepfx Ahysgk Working width 1400mm. Total length 3,70m Total power 71,55 kW Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Brand: CEFLA Model: TR3000/133/RE/RU Total length 2,60m Band width 1450mm Feeding with electric motor 0,26kW / 0,35HP Fully working. Available immediately. Pjdpfot Rr Hbjx Ahyegk

Condition: refurbished (used), Year of construction: 2010, operating hours: 14,258 h, load capacity: 1,600 kg, lifting height: 4,400 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Friedmann Forklifts – Remade for Action Used industrial trucks from selected premium manufacturers, fully serviced, tested, and refurbished by us in accordance with FEM-4.004 (UVV) standards. Custom modifications of any type available upon customer request. Pgjdewzuybopfx Ahysk

Condition: used, first registration: 11/2006, Year of construction: 2006, MÜLLER - MITTELTAL T4 Kompakt Turntable - Low-loader with air suspension and wheel recesses - 4 x air-suspended GIGANT axles - air suspension - 4 x wheel recesses - mechanical loading ramps - 2 foldable rear supports - extendable warning panels - ABS Psdpewmpbdjfx Ahysgk - MICHELIN tyres: 235/75 R 17.5 - heavy-duty version: 40,000 kg GVW - unladen weight: 8,400 kg - overall length: 11,750 mm - 50 mm towing eye Particularly suitable for transporting lime milling machines! - German trailer - General inspection / safety test available on request and at extra cost! Subject to prior sale and errors!

Condition: excellent (used), 24 running meters of pallet rack SSI Schaefer Palflex incl. insertion grid second hand, good condition, see pictures height 4 m depth 105 cm beam length 2,95 m Load / compartment 2400 kg Frame galvanized, beam red Pjdpeiauh Tefx Ahyegk Negotiable price: € 2.890,-- net ex stock Offer consists of: + 9 pcs. frames pre-assembled, 12t field load, depth 105 cm, height 4 m + 32 pcs. beams, length 2,95 m, 2400 kg payload/slot + 64 pcs. suspension locks + 18 pcs. concrete anchors + 48 pcs. insertion grids / depth supports for 16 levels à 2,95m Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Year of construction: 2000, condition: used, Roller conveyor length: 4000 mm Roller conveyor width: 300 mm Pgodpfx Ahsy Hqdysyjk Rollers: Steel Stop flap with scale: Yes

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Pgodpju Tg I Defx Ahysk Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Pjdpfx Ahjy Dq Awjyjgk Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Pgsdpfev N Iuisx Ahyjk Weight approx.: 2000 kg colour: light grey

Condition: used, functionality: fully functional, Guillotine Shear Brand: SAGITA Capacity: 4000 x 8 mm Backgauge capacity: 1100 mm Dimensions: 4750 x 2250 x 1850 mm Weight: 12 t Pgedpfx Ahjynglneysk Blade gap adjustment ELGO backgauge Rear sheet support

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Machine Benefits Qualitative Machine Benefits • Very good condition! Pgsdpfjyttffex Ahyek Technical Machine Benefits • Spindle motor power 22/26kw

Condition: like new (used), functionality: fully functional, chuck outer diameter: 1,250 mm, 4-Jaw Lathe Chuck BISON Ø 1250 mm, A15 Mount – almost new For sale: 4-jaw independent lathe chuck from renowned manufacturer BISON, diameter 1250 mm. Designed for heavy-duty industrial applications, suitable for large conventional and CNC lathes. Technical data: Manufacturer: BISON Type: 4-jaw independent chuck Diameter: 1250 mm Mounting: A15 taper Condition: almost new Pedpfx Ahsy Exqxeyjgk Description: High-quality lathe chuck ensuring precise clamping of large workpieces. Each jaw is independently adjustable – perfect for machining irregular shapes. Available from stock.

Condition: used, mileage: 257,714 km, power: 206 kW (280.08 HP), first registration: 03/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, * Sun visor * ABS (Anti-lock Braking System) * ASR (Anti-Slip Regulation) * Radio * Cruise control * Analog tachometer Pgjdpfxjy Hyrae Ahyjk * Electric window lifter, right * Electrically adjustable mirrors * Mirror heating * Rear window * Air-suspended driver's seat * Rear axle differential lock * AP axles * Amber rotating beacon * Exhaust behind cab * Air dryer * Trailer coupling * 2-line air connection * 8-speed gearbox * Suspension: leaf springs * Payload: 9,055 kg * Continuous brake: engine brake ----Body: Meiller skip loader AK 12 MT, telescopic, 10,500 kg lifting capacity, internal and external controls. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING FEATURES AND ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all contracts, invoices, pro forma invoices, orders, and sales discussions.

Condition: used, empty load weight: 1,300 kg, maximum load weight: 2,700 kg, overall weight: 4,000 kg, axle configuration: 2 axles, first registration: 06/1978, loading space length: 4,000 mm, loading space width: 1,750 mm, loading space height: 400 mm, total length: 2,350 mm, total width: 2,700 mm, suspension: steel, tire size: 7.00 R 16, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, leaf suspension, mechan. ramps Pedpfei Rnllex Ahyjgk Body: mechanical ramps, wooden floor, ramps: 1800 x 500 mm, was repaired for 1.500,- EUR incl. paint! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 333,400 km, power: 375 kW (509.86 HP), first registration: 11/2019, fuel type: diesel, empty load weight: 14,514 kg, overall weight: 32,000 kg, tire size: 315/80 R22,5, axle configuration: 8x4, wheelbase: 4,300 mm, next inspection (TÜV): 12/2026, energy efficiency: D, color: white, gearing type: automatic, emission class: euro6, suspension: steel, loading space volume: 13 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, navigation system, parking heater, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement 12,419 cc Hydraulics (PTO) Low-noise Light alloy wheels Euro 6 D Pgjdpfxsyplqxo Ahyjk Payload 17,486 kg Retarder Automatic climate control Electric sliding roof Cranaro Sun visor Beacon lights Air horns 1 bed Cool box Hydraulic, air + electrical connections for trailer operation (without trailer coupling) Foldable underrun protection Lashing rings Air-suspended cab Gross combination weight 60,000 kg Towing capacity 40,000 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Pedpjxmd Suofx Ahyogk Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: excellent (used), mileage: 442,000 km, power: 412 kW (560.16 HP), fuel type: diesel, tire size: 385/65R 22.5, axle configuration: 8x4, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 16,000 kg, Year of construction: 2015, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Remarks = Pjdpsw Tcvaofx Ahyegk Colour: Yellow Details Manufacturer: MAN Model: TGX 41.560 8x4/4 BBS Chassis number: WMA86XZZ6GL071758 Year: 2015 Odometer: approx. 442,000 km Engine: 560 hp / EURO 6 / Diesel Transmission: Automatic 6F Intarder and ZF WSK 400 Front axle: 9,000 kg – 385/65R 22.5 – leaf suspension Second axle: 8,000 kg – 385/65R 22.5 – air suspension Rear axles: 16,000 kg – 315/80R 22.5 – leaf suspension GVW: 41,000 kg GCW: 180,000 kg Equipment Jost JSK38 fifth wheel on sliding frame Toolboxes behind the cab Working lights Front push coupler – to be installed Rear Rockinger coupler – to be installed Automatic transmission Intarder PTO + hydraulic pump system Cab Sleeper cab Cruise control Air conditioning Comfort seats Radio CD player/navigation Sun visor = Further Information = General Information Year of manufacture: 2015 Intended use: Agriculture Technical Information Number of cylinders: 8 Payload: 180,000 kg GVW: 41,000 kg Transmission Transmission: ZF WSK 400, automatic Axle Configuration Front axle: Tyre size: 385/65R 22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Rear axle 1: Tyre size: 385/65R 22.5; Max. axle load: 8,000 kg; Steered; Suspension: air suspension Rear axle 2: Tyre size: 315/80R 22.5; Dual wheels; Max. axle load: 16,000 kg; Reduction: external planetary axles; Suspension: air suspension Rear axle 3: Tyre size: 315/80R 22.5; Dual wheels; Max. axle load: 16,000 kg; Reduction: external planetary axles; Suspension: air suspension Functional Body manufacturer: ZF Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: on request Further information Please contact Stefan Schaapveld for more information.

Condition: used, mileage: 330,000 km, power: 323 kW (439.16 HP), first registration: 09/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: red, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,630 mm, loading space length: 5,655 mm, loading space width: 2,387 mm, loading space height: 990 mm, Equipment: ABS, air conditioning, soot filter, Reverse warning system, leaf suspension, outside temperature display, differential lock, air brake, roof hatch, air-suspended seat, heated exterior mirrors, electric exterior mirrors, CB radio, tachograph, power take-off, underride guard, twin tires, pneumatic braking system, used vehicle. Pjdpfx Asy Hnpmehyegk Vehicle no. 3351, ABS, traction control, multifunction steering wheel, cruise control, diff locks, central locking, radio/CD, CG16L cab with sun visor, roof hatch, rear wall window, reversing camera, air conditioning, rotating beacons, CB radio, 12-speed manual transmission, retarder, front and rear leaf suspension, towing coupling (jaw) with air and electric connections, EURO 5, tires 1st and 2nd axle: 385/65 R 22.5, rear axle: 315/80 R 22.5, Meiller 3-way tipper with Bordmatik left, dimensions (LxWxH): 5,655 x 2,387 x 990 mm, unladen weight: 14,125 kg, : 32,000 kg / 36,000 kg, 1st owner, For inquiries please call, Errors and prior sale excepted.