Used Bts-Mf60 Waste Baler, Cardboard, Foil for sale (5,058)

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Cgsdpedzqnysfx Akcot Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: like new (used), inline Foilsealer and Shrinking tunnel Cedpfx Akjg D Nv Tocsgt Make: Kallfass Type: semi/automatic shrinking tunnel Modell: Mat 1606-KS1600uni Capacity: 10-15packs/min (depends on product) Frame: Steel Range: 1600(belt)x600mm (W x H) Dimensions: L x W x H = 4000 x 2050 x 1750mm Weight: 900Kg Electric: 380V+N+E, 65Kw Condition: As-is, working condition

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Cedpfx Asg D Nyhjkcegt Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam automatic / semi-automatic 2 hand control Remark: excellent condition

Condition: good (used), Make: Kallfass Type: semi-automatic Foilwrapper /shrinking tunnel Model: Combi-simplex Frame: steel painted Cgodpfeiaumuex Akcet Range: max. pack W x L x H = 600 x 380 x 320 mm Capacity: max. 600 packs/hr Dimensions: L x W x H = 2650 x 1400 x 1650 mm Weight: 650 kg Power-supply: 380 Volt – 50Hz – 11,5 kW Features: mobile semi-automatic 2 hand control Remark: good condition (some minor repairs needed)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Cgedsu Tha Iepfx Akcet Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a Cedju Thhrjpfx Akcjgt bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Cgedpfx Aksx Dnb Uocet Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Cgedpfxex A U Ncs Akcot Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Year of construction: 1982, condition: excellent (used), Gietz FSA 720 die cutting and hot foil Sheet Size 720 x 520mm, Codeul T R Repfx Akcegt High Speed Suction Feeder, Two Sheet Detection, Central Control Console, 2 x Honeycomb, 6 x Heat Zones,

Condition: new, Year of construction: 2025, Available immediately in stock in Europe Infrared safety device Cedsu Uzb Uspfx Akcjgt Automatic oil pump High-Quality Performance: The TYMB 1040 machine is designed for commercial use, featuring a gross power of 19kw and a flat bed printer plate type, ensuring efficient and precise printing results. Multi-Functional Capabilities: This machine can be used for various applications, including paper printing, label printing, card printing, and tube printing, catering to diverse user needs. Competitive Price: As a new product with a competitive price, the TYMB 1040 offers an excellent value proposition for businesses looking to upgrade their printing capabilities without breaking the bank. CE Certification and After-Sales Support: The machine is CE certified and comes with engineers available to service machinery overseas, providing users with peace of mind and reliable after-sales support. Durable Construction: With a weight of 5t and dimensions of 2250x2200x2000mm, Show less

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,700 mm, total width: 3,400 mm, total length: 2,300 mm, overall weight: 2,400 kg, compressed air connection: 8 bar, warranty duration: 60 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Specification: PULLING SPEED: 2m/s MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm x 7000mm Cgedpfefbl Hajx Akcot MINIMUM BOARD SIZE: 200 x 630mm SLOTTING KNIVES: 2x 500mm (segmented) WIDTH OF SLOT: 8mm OPTIONAL ADDITIONS: One color Flexo printing module, Gluing module (Nordson system for cold glue), Vacuum auto-feed table, additional tools. Automation is the main asset here. Automatic adjustment of slotting knives, guide rail and creasing wheels with integrated scalpel knives allow this model to reduce the time required to change between box models to just thirty seconds. The machine is fitted with a Die-cut module for cutting out hand holes. The BM Varenne has 4 positions with 6 tools. 2 circular knives and 2 creasing wheels with integrated scalpels for cutting of the gluing flap. It is possible to control all 4 positions independently. Wheels and knives can be changed quickly, without tools - different diameters and formats. Combining cutting, creasing and perforation tools with production needs allows for unprecedented flexibility for a machine of this kind. Adding different quick release tools like perforation knives, double creasing wheels and more, gives this machine instant flexibility and higher output. With the machine comes a 5 year warranty period, which is market leading duration and testimony of quality on its own.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine Codpfsy E Exisx Akcegt This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Year of construction: 2019, operating hours: 30 h, load capacity: 1,400 kg, fuel type: electric, empty load weight: 400 kg, mileage: 30 km, Electric pallet truck Brand: Toyota Year of manufacture: 2019 Only 30 operating hours Capacity: 1,400 kg Forks: 1,150 mm Battery with charger Cgjdpfx Akoy Exl Njcet

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MM1007, bale length: 880 mm, bale height: 600 mm, pressing force: 500 t, Taurus shear baler model E 556.P, year 2015, in excellent working condition and complete with documentation. This machine is ideal for baling and shearing all types of ferrous scrap: profiles, sheet metal, bulky mixed scrap, and vehicles. Technical data Shearing force: 500 tons Shearing width: approx. 950 mm Shearing height: approx. 640 mm Box length: 5,600 mm Open box width: 2,400 mm Bale size (closed): Width: 880 mm Height: 600 mm Features Soundproofed 125 HP diesel engine Operator cabin Radio remote control Complete documentation Cgodpfsy Iblwsx Akcjt Machine ready for operation.

Condition: used, Year of construction: 2007, operating hours: 2,568 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,900 kg, pressure: 200 bar, electrical fuse: 27 A, We offer this used LUX VM-TEC K50V4 baler for paper, foil, and plastics, year of manufacture 2007. The baler comes complete with conveyor. Model: K50V4 Year of manufacture: 2/2007 Production number: abba359 Serial number: Cont-000089 Power: 18.5 kW Current: 27 A Voltage: 400 V Cgedpfx Akoy H E R Iocjt Frequency: 50 Hz Maximum pressure: 200 bar Weight: 4,900 kg If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Cgodpfx Aksra Nyuscst Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Year 2011-2013, price: 6000 EUR YEAR 2018 COSTS 6000 EUR We also have HSM V-press 1160 max balers from 2014-2015 available.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s Cedpfx Ajy Ehl Eokcjgt The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: good (used), Endoline 221 case erecting machine, can handle cases between 200-500mm length, 150-400mm width and 175-600mm height at up to 16 cases per minute as standard. Cgedpfx Aeu S R Avekcet

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 17,000 mm, total width: 34,000 mm, total length: 23,000 mm, overall weight: 2,600 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, High quality, state of the art electronics, including servo motors, 15'' control unit. BOXmaker PRO 2400S - automatic setup (set-up time up to 30 seconds) CAPACITY: up to 1200 boxes per hour (FEFCO 200) MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 800mm length Servo puller: 2m/s Slotting knives x2 Servo powered slotting subassembly (30% faster cycle) Csdpfod Sap Tox Akcogt Creasing wheels with integrated Scalpels (longitudinal creasing and cutting off glue flaps) x2 Circular knives (removing excess cardboard longitudinally - window cut out) x2 Hand Holder Tool (making holes, die cut) Crosscutting Tool Flexo printing module - one color, 300 x 470mm (optional) Gluing module - cold glue system (optional)

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: Cjdjv D If Dopfx Akcsgt 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 0392, Feeding width (mm): 500 Kw: 7.5 Csdodt Rthepfx Akcogt A: 380

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Cedpfsx I Nfrex Akcogt Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Cgedjxmiqijpfx Akcjt

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 58900538, input voltage: 380 V, total width: 1,200 mm, total height: 2,300 mm, overall weight: 470 kg, total length: 850 mm, filling opening width: 830 mm, bale width: 830 mm, bale length: 600 mm, bale height: 650 mm, opening width: 830 mm, transport height: 2,300 mm, Machine fully functional, but the press plate is deformed and needs to be straightened (see photo). The machine is sold together with strapping bands for bundling the bales and a sack truck for transporting the bales. Pick-up only, no delivery and no warranty. Cedpoy Hlg Njfx Akcogt

Condition: used, machine/vehicle number: 007516, Max width workable: 2400 mm Cedpfx Aowuz D Tskcjgt